Hauppauge ImpactVCB

From ZoneMinder Wiki
Revision as of 17:56, 5 November 2007 by Mhamel (talk | contribs)
Jump to navigationJump to search

Hauppauge ImpactVCB use the same drivers as the Osprey 100

http://www.bttv-gallery.de/Hauppauge_Impact_VCB_Model.jpg

Modprobe.conf option

options bttv card=82 tuner=4

This card is now supported in the 2.6.16 kernel as card 143 and should autodetect.

Note that the card ships with either an NTSC (26Mhz) or a PAL (35MHz) crystal. The driver assumes that your camera format matches the crystal. If it does not, you will get no colour and/or loss of picture lock. Fortunately the card can synthesise one frequency from the other, but has to be told to do so with the option

bttv pll=1  (for NTSC crystal ->PAL camera)
bttv pll=2  (for PAL->NTSC)