Difference between revisions of "Hauppauge ImpactVCB"

From ZoneMinder Wiki
Jump to navigationJump to search
Line 7: Line 7:


This card is now supported in the 2.6.16 kernel as card 143 and should autodetect.
This card is now supported in the 2.6.16 kernel as card 143 and should autodetect.
Note that the card ships with either an NTSC (26Mhz) or a PAL (35MHz) crystal. The driver assumes that your camera format matches the crystal. If it does not, you will get no colour and/or loss of picture lock. Fortunately the card can synthesise one frequency from the other, but has to be told to do so with the option
bttv pll=1  (for NTSC crystal ->PAL camera)
bttv pll=2  (for PAL->NTSC)

Revision as of 17:56, 5 November 2007

Hauppauge ImpactVCB use the same drivers as the Osprey 100

http://www.bttv-gallery.de/Hauppauge_Impact_VCB_Model.jpg

Modprobe.conf option

options bttv card=82 tuner=4

This card is now supported in the 2.6.16 kernel as card 143 and should autodetect.

Note that the card ships with either an NTSC (26Mhz) or a PAL (35MHz) crystal. The driver assumes that your camera format matches the crystal. If it does not, you will get no colour and/or loss of picture lock. Fortunately the card can synthesise one frequency from the other, but has to be told to do so with the option

bttv pll=1  (for NTSC crystal ->PAL camera)
bttv pll=2  (for PAL->NTSC)