View source for ZoneMinder on Ubuntu 9.10 32bit - Vanilla Fresh Install - (with FFmpeg SVN, ZoneMinder SVN, jscalendar-1.0, cambozola-0.76)

== ZoneMinder on Ubuntu 9.10 32bit - Vanilla Fresh Install  - (with FFmpeg SVN, ZoneMinder SVN, jscalendar-1.0, cambozola-0.76)==

=== Update Ubuntu 9.10 ===
<pre>
aptitude update
aptitude full-upgrade
reboot
</pre>

=== Make System file changes (For ZoneMinder Shared Mem) ===

For this section, I will refer you to the following 2 posts:

[http://www.zoneminder.com/forums/viewtopic.php?p=50772#50772 Forum Post on Shared Memory]

[http://www.zoneminder.com/wiki/index.php/FAQ#What_does_a_.27Can.27t_shmget:_Invalid_argument.27_error_in_my_logs_mean.3F_and_my_cameras_won.27t_display_video_at_higher_resolutions. ZoneMinder FAQ with Formulas]

Using these calculations, for 6GB of Physical Memory I would use this:

<pre>
echo "#Below are for ZoneMinder#" >> /etc/sysctl.conf
echo "kernel.shmall = 1536000" >> /etc/sysctl.conf
echo "kernel.shmmax = 3221225472" >> /etc/sysctl.conf
</pre>

=== Install All Prerequisites ===
<pre>
aptitude install build-essential linux-headers-`uname -r` automake perl libnet-ssleay-perl openssl libauthen-pam-perl \
libpam-runtime libio-pty-perl libmd5-perl apache2 php5-mysql libapache2-mod-php5 mysql-server libmysqlclient15-dev \
libarchive-zip-perl libdate-manip-perl libdevice-serialport-perl libjpeg62 libjpeg62-dev libmime-perl libstdc++6 libwww-perl \
zlib1g zip unzip patch ntp openssl libpcre3-dev libssl-dev libjpeg-progs libcurl4-gnutls-dev munin munin-node libmime-lite-perl \
netpbm libbz2-dev subversion sysvconfig checkinstall
</pre>

=== Install Perl Modules ===
<pre>
perl -MCPAN -e shell

install CPAN
exit

perl -MCPAN -e shell
install YAML PHP::Serialization Module::Load X10::ActiveHome Sys::Mmap

exit
</pre>

== FFmpeg & ZoneMinder from SVN ==

=== Install FFmpeg === 

<pre>
cd /usr/src

svn checkout svn://svn.mplayerhq.hu/ffmpeg/trunk ffmpeg > /usr/src/XXX_FFMPEG_LOG.txt

cd ffmpeg

./configure --enable-gpl --enable-shared --enable-pthreads

make
checkinstall --fstrans=no --install=yes --pkgname=ffmpeg --pkgversion "3:0.svn`date +%Y%m%d`-12ubuntu3" --default

ldconfig

cd /lib
ln -s /usr/local/lib/libswscale.so.0
ln -s /usr/local/lib/libavformat.so.52
ln -s /usr/local/lib/libavcodec.so.52
ln -s /usr/local/lib/libavutil.so.50
ln -s /usr/local/lib/libavdevice.so.52

</pre>

=== Install & Config ZoneMinder ===

<pre>
cd /usr/src
svn co http://svn.zoneminder.com/svn/zm/trunk zm > /usr/src/XXX_ZM_LOG.txt
cd zm

./configure --with-webdir=/var/www --with-cgidir=/usr/lib/cgi-bin ZM_DB_HOST=localhost ZM_DB_NAME=zm ZM_DB_USER=zmuser \
ZM_DB_PASS=zmpass --enable-debug=yes --with-webgroup=www-data --with-webuser=www-data --enable-mmap

aclocal
autoconf
automake
make

mysql -u root -p < db/zm_create.sql
mysql -u root -p

grant select,insert,update,delete on zm.* to 'zmuser'@localhost identified by 'zmpass';
flush privileges;
quit

checkinstall --fstrans=no --install=yes --pkgname=ZoneMinder --pkgversion "1.24.2-svn`date +%Y%m%d`" --default
</pre>


== Post Install ==

=== Install cambozola.jar ===
<pre>
cd /usr/src
wget http://www.charliemouse.com:8080/code/cambozola/cambozola-latest.tar.gz
tar -xzvf cambozola-latest.tar.gz
cp cambozola-0.76/dist/cambozola.jar /var/www
</pre>

=== Install jscalendar-1.0 ===
<pre>
cd /usr/src
wget http://prdownloads.sourceforge.net/jscalendar/jscalendar-1.0.zip?download
unzip jscalendar-1.0.zip
mkdir /var/www/tools/jscalendar
cp -R jscalendar-1.0/* /var/www/tools/jscalendar
</pre>

=== Remove existing index.html ===
<pre>
rm /var/www/index.html
</pre>

=== Make sure ZoneMinder starts automatically ===

<pre>
nano -w /etc/init.d/zm
</pre>

<pre>
#!/bin/sh
# description: Control ZoneMinder as a Service
# chkconfig: 2345 99 99

# Source function library.
#. /etc/rc.d/init.d/functions

prog=ZoneMinder
ZM_PATH_BIN="/usr/local/bin"
command="$ZM_PATH_BIN/zmpkg.pl"

start() {
        echo -n "Starting $prog: "
        $command start
        RETVAL=$?
        [ $RETVAL = 0 ] && echo success
        [ $RETVAL != 0 ] && echo failure
        return $RETVAL
}
stop() {
        echo -n "Stopping $prog: "
        $command stop
        RETVAL=$?
        [ $RETVAL = 0 ] && echo success
        [ $RETVAL != 0 ] && echo failure
}
status() {
        result=`$command status`
        if [ "$result" = "running" ]; then
                echo "ZoneMinder is running"
                RETVAL=0
        else
                echo "ZoneMinder is stopped"
                RETVAL=1
        fi
}

case "$1" in
'start')
        start
        ;;
'stop')
        stop
        ;;
'restart')
        stop
        start
        ;;
'status')
        status
        ;;
*)
        echo "Usage: $0 { start | stop | restart | status }"
        RETVAL=1
        ;;
esac
exit $RETVAL
</pre>

Make /etc/init.d/zm executable:

<pre>
chmod 755 /etc/init.d/zm
</pre>

=== Install Webmin ===

<pre>

cd /usr/src

wget http://downloads.sourceforge.net/project/webadmin/webmin/1.500/webmin_1.500_all.deb

dpkg -i webmin_1.500_all.deb

</pre>

Login to Webmin via: https://SERVERIP:10000

Navigate to: System --> Bootup & Shutdown

Select the check next to "zm" and press the "Start at Boot" button

*  Webmin notice: after installing Webmin 1.500 update the System Logs via: Unused Modules > System Logs > Module Config, change the default /etc/syslog.conf to /etc/rsyslog.conf

== Reboot System ==

Again, this is meant to be installed on a FRESH install of 9.10 with no modifications.  Also, this guide is meant to be run as root, as such I have left out all the 'sudo' prefixes.

Please try and let me know your success.  I've installed this way 3 times from scratch on a virtual machine, and I think this guide is now complete.