Difference between revisions of "Wyze Cam"
From ZoneMinder Wiki
Jump to navigationJump to search
(Initial stub for Wyze Cam) |
m |
||
| Line 1: | Line 1: | ||
Enable RTSP via Wyze app. | Enable RTSP via Wyze app. | ||
Note: RTSP is only available with special, non-standard firmware. See instructions here: https://support.wyzecam.com/hc/en-us/articles/360026245231-Wyze-Cam-RTSP | |||
Use RTSP path provided by app in this format: <pre>rtsp://[user]:[password]@[IP]/live</pre> | Use RTSP path provided by app in this format: <pre>rtsp://[user]:[password]@[IP]/live</pre> | ||
Revision as of 07:52, 22 December 2019
Enable RTSP via Wyze app.
Note: RTSP is only available with special, non-standard firmware. See instructions here: https://support.wyzecam.com/hc/en-us/articles/360026245231-Wyze-Cam-RTSP
Use RTSP path provided by app in this format:
rtsp://[user]:[password]@[IP]/live
Regardless of app settings, capture settings are 1920x1080 at 32 bit colour. Do not use maximum FPS.
FFMPEG results in significant artifacts; use of LibVLC is recommended instead.
