Difference between revisions of "Foscam FI9821W V2"
From ZoneMinder Wiki
Jump to navigationJump to search
(basic formatting) |
|||
| Line 1: | Line 1: | ||
Foscam FI9821W V2 with control | = Foscam FI9821W V2 with control = | ||
With the newer version of the Foscam firmware you are prompted to change the default login. I did this then added another user called admin. I'm not sure if this is necessary but I was able to get the camera to work with control. | With the newer version of the Foscam firmware you are prompted to change the default login. I did this then added another user called admin. I'm not sure if this is necessary but I was able to get the camera to work with control. | ||
Camera Video Settings | == Camera Video Settings == | ||
Stream Type | * Stream Type: HD Mode | ||
* Resolution: 720P | |||
* Bit Rate: 128K | |||
* Frame Rate: 5 | |||
* Key Frame Interval: 50 | |||
* Variable bitrate: Yes | |||
== Zoneminder Monitor Settings == | |||
* Source Type: Ffmpeg | |||
* Function: Modect (or your choice) | |||
* Source Path: rtsp://admin:(Password)@IP-Address:88/videoMain | |||
* Remote Method: RTP/Unicast | |||
* Capture Width: 640 | |||
* Capture Height: 320 | |||
* Control Type: Foscam FI9821W (see note 1) | |||
* Control Device: (Password) (see note 2) | |||
* Control Address: IP-Address:88 | |||
* Auto Stop Timeout: 1 | |||
== Notes == | |||
Note 1: Edit Foscam FI9821W and remove check marks in Zoom, Focus, White, Iris, and change Presets number from 16 to 8 | Note 1: Edit Foscam FI9821W and remove check marks in Zoom, Focus, White, Iris, and change Presets number from 16 to 8 | ||
Note 2: You may be able to use just the camera password or user=(user)&pwd=(password) | Note 2: You may be able to use just the camera password or user=(user)&pwd=(password) | ||
Note 2 addendum: I was only able to PTZ working if Control Device was in the format of user:password | Note 2 addendum: I was only able to PTZ working if Control Device was in the format of user:password | ||
You should be able to use higher or lower resolutions but keep the WidthxHeight ratio within the 640x320 value | You should be able to use higher or lower resolutions but keep the WidthxHeight ratio within the 640x320 value | ||
Revision as of 06:09, 7 March 2020
Foscam FI9821W V2 with control
With the newer version of the Foscam firmware you are prompted to change the default login. I did this then added another user called admin. I'm not sure if this is necessary but I was able to get the camera to work with control.
Camera Video Settings
- Stream Type: HD Mode
- Resolution: 720P
- Bit Rate: 128K
- Frame Rate: 5
- Key Frame Interval: 50
- Variable bitrate: Yes
Zoneminder Monitor Settings
- Source Type: Ffmpeg
- Function: Modect (or your choice)
- Source Path: rtsp://admin:(Password)@IP-Address:88/videoMain
- Remote Method: RTP/Unicast
- Capture Width: 640
- Capture Height: 320
- Control Type: Foscam FI9821W (see note 1)
- Control Device: (Password) (see note 2)
- Control Address: IP-Address:88
- Auto Stop Timeout: 1
Notes
Note 1: Edit Foscam FI9821W and remove check marks in Zoom, Focus, White, Iris, and change Presets number from 16 to 8
Note 2: You may be able to use just the camera password or user=(user)&pwd=(password)
Note 2 addendum: I was only able to PTZ working if Control Device was in the format of user:password
You should be able to use higher or lower resolutions but keep the WidthxHeight ratio within the 640x320 value
