Difference between revisions of "Zone Parameter Explanations version 1.22"
From ZoneMinder Wiki
Jump to navigationJump to search
m |
|||
| (One intermediate revision by the same user not shown) | |||
| Line 1: | Line 1: | ||
[[General_Notes#Zone_Configurations_and_Fine_Tunings|Back]] | |||
===Zone Parameter Explanations=== | ===Zone Parameter Explanations=== | ||
*Note: This area is complex and needs alot of work. Please help in any way that you can! | *Note: This area is complex and needs alot of work. Please help in any way that you can! | ||
Latest revision as of 15:18, 19 June 2007
Zone Parameter Explanations
- Note: This area is complex and needs alot of work. Please help in any way that you can!
Name
Each Zone can be named for reference purposes. Choose a name that helps you identify your zones.
Type
- Active -
- Inclusive -
- Exclusive -
- Preclusive -
- Inactive -
Units
- Pixels - Selecting this option will allow many of the following values to be entered (or viewed) in units of pixels.
- Percentage - Selecting this option will allow may of the following values to be entered (orviewed) as a percentage.
Minimum X - Minimum Y - Maximum X - Maximum Y
Use these parameters to define the X,Y coordinates of the corners of the zone that is to be defined.
Alarm Colour
These parameters can be used to indvidually colorize the zone overlay pattern. By default, red is the active zone and green is the ??? zone.
