Difference between revisions of "Axis"
Kylejohnson (talk | contribs) (Added the AXIS Q6032-E) |
|||
Line 168: | Line 168: | ||
* Capture Width (pixels): 1024 | * Capture Width (pixels): 1024 | ||
* Capture Height (pixels): 640 | * Capture Height (pixels): 640 | ||
==AXIS Q6032-E== | |||
* Remote Protocol: HTTP | |||
* Remote Method: Simple | |||
* Remote Host Name: <user>:<password>@<hostname or IP> | |||
* Remote Host Port: 80 | |||
* Remote Host Path: /mjpg/video.mjpg | |||
* Remote Image Colours: <24 bit color|32 bit color> | |||
* Capture Width (pixels): 704 | |||
* Capture Height (pixels): 480 |
Revision as of 01:41, 21 December 2012
ZoneMinder will work well with just about any Axis camera, including the 205, 206, 207, 209, 210, 211 and M10 ranges. It will also work with the 213 and 2130 cameras and support their PTZ functions through the web interface.
Please note that early 207's has some hardware issues. See this thread in the forum for details. Also note that the 2100 has been discontinued by Axis and no longer supported, possibly due to hardware related problems. It's noted in the forums that the camera sends the pictures it captures somewhat diced up.
How to Offload the Motion to cameras AxisMotionDetection
Axis publishes their full, open API named VAPIX; documentation may be found at Axis Developer Pages. Note in particular the HTTP API which defines the remote host path arguments which may be used by Zoneminder.
AXIS 2110
/axis-cgi/mjpg/video.cgi?camera=&resolution=320×240
AXIS 207W
<User>:<Password>@<IP Address>/axis-cgi/mjpg/video.cgi?camera=&resolution=320×240
AXIS P33XX-V/VE
<User>:<Password>@<IP Address>/axis-cgi/mjpg/video.cgi?camera=&resolution=320×240 or <User>:<Password>@<IP Address>/mjpg/video.mjpg
AXIS P1311
<User>:<Password>@<IP Address>/mjpg/video.mjpg
AXIS 213PTZ
The axis 213PTZ works perfectly. Use the folowing settings:
SOURCE Remote Protocol: RTSP Remote Method: RTP/RTSP Remote Host Name: <USER>:<PASS>@<CAM IP/HOSTNAME> Remote Host Port: 554 Remote Host Path: /mpeg4/media.amp
CONTROL Controllable: Yes Control Type: Axis API v2 Control Address: <USER>:<PASS>@<CAM IP/HOSTNAME>
The resolution must match the one especified in the camera settings. Resolutions up to CIF will work without any problems but 2CIF and 4CIF will need the shared memory tweak (lean more at the FAQ)
The AxisMotionDetection trick works quite well with this camera.
The Max FPS option of zoneminder introduces very big latency, so I use the option of the camera for limiting the FPS.
This was tested with zoneminder 1.24.2 running on Gentoo stable
AXIS M1011-W
I get a lower load by using the MJPEG stream compared to the JPEG still images. Mathieumd 15:52, 17 May 2012 (BST)
General
Tab/Label | MJPEG Stream | JPEG Stills |
---|---|---|
General | ||
Source Type | Remote | |
Maximum FPS | 5 | |
Alarm Maximum FPS | 15 | |
Source | ||
Remote Protocol | HTTP | |
Remote Method | Simple | |
Remote Host Name | [<USER>:<PASS>@]<CAM IP/HOSTNAME> | |
Remote Host Port | <CAM PORT> (usually 80 or 443) | |
Remote Host Path | /axis-cgi/mjpg/video.cgi?resolution=640x480&fps=15 | /axis-cgi/jpg/image.cgi?resolution=640x480 |
Capture Width (pixels) | 640 | |
Capture Height (pixels) | 480 |
AXIS M1031-W
SOURCE Remote Protocol: HTTP Remote Method: Simple Remote Host Name: <CAM IP/HOSTNAME> Remote Host Port: <CAM PORT> Remote Host Path: /axis-cgi/mjpg/video.cgi?resolution=640x480
OR for mpeg-4
SOURCE Remote Protocol: RTSP Remote Method: RTP/RTSP/HTTP Remote Host Name: <USER>:<PASS>@<CAM IP/HOSTNAME> Remote Host Port: <CAM PORT> Remote Host Path: /mpeg4/media.amp
AXIS M1054
Working just fine with my zoneminder setup under Ubuntu 10.04 and 11.04, using MJPEG setup.
My camera setup:
- Source type: remote
- Function: modect
- maximum fps 8.00
- alarm fps 30.00
- remote protocol: http
- remote method: simple
- remote host name: the DNS name of the camera (or IP adress I suppose)
- remote host port: 80
- remote host path: /axis-cgi/mjpg/video.cgi
- capture width: 1280
- capture height: 800
I just captured some thiefs with this setup, police caught them and used the pictures as proof. High quality pictures for that price of a camera and very reliable (running 1/2 year now without a single crash or disfunction).[1]
AXIS M1114
works with following entrys
- Source type: remote
- Function: [what_you_want]
- maximum fps 0 # don't put any value here
- alarm fps 0 # don't put any value here
- remote protocol: http
- remote method: simple
- remote host name: user:password@IP-Address or user:password@DNS_Name
- remote host port: 80
- remote host path: /mjpg/video.mjpg?resolution=480x360
- capture width: 480 #depends on your "remote host path" setting, must to be the same!
- capture height: 360 #depends on your "remote host path" setting, must to be the same!
Using remote host path and arguments from the Axis VAPIX HTTP API. Includes limiting the frame rate (fps=x)
- Remote Protocol: HTTP
- Remote Method: Simple
- Remote Host Name: <user>:<password>@<hostname or IP>
- Remote Host Port: 80
- Remote Host Path: /axis-cgi/mjpg/video.cgi?fps=15&resolution=1024x640
- Remote Image Colours: 24 bit color
- Capture Width (pixels): 1024
- Capture Height (pixels): 640
AXIS Q6032-E
- Remote Protocol: HTTP
- Remote Method: Simple
- Remote Host Name: <user>:<password>@<hostname or IP>
- Remote Host Port: 80
- Remote Host Path: /mjpg/video.mjpg
- Remote Image Colours: <24 bit color|32 bit color>
- Capture Width (pixels): 704
- Capture Height (pixels): 480