Difference between revisions of "Anykeeper"

Latest revision as of 07:30, 21 April 2014

Error creating thumbnail: Unable to save thumbnail to destination

I have the following line in /etc/modprobe.d/bttv.conf options bttv card=131,131,131,131,131,131,131,131

or on a newer system (as .conf is deprecated)

/etc/modprobe.d/mycapturecard options bttv card=131,131,131,131,131,131,131,131

I have 8x131 as I have 2 cards which I think is a WDT 2116. which gives me 16 inputs.

The only other thing in the main options under config I unticked STRICT_VIDEO_CONFIG.

@@ Line 1: / Line 1: @@
 [[Image:anykeeper-low.jpg]]
 I have the following line in /etc/modprobe.d/bttv.conf
 options bttv card=131,131,131,131,131,131,131,131
-I have 8x131 as I have 2 cards which I think is a WDT 2116. which gives me 16 inputs.
+or on a newer system (as .conf is deprecated)
-In order to setup my monitors I have the first one on the device /dev/video0 with the channel as 0. The 2nd monitor I've setup as /dev/video1 with the channel as 1.
+/etc/modprobe.d/mycapturecard
-I did set both on the device /dev/video0 (channels 0 & 1 respectively) but this slowed but the fps and I only use 7 inputs so seemed better to have each set on it's own device.
+options bttv card=131,131,131,131,131,131,131,131
-As for the other settings I have V4L2, PAL & BGR24 (NOT RGB). the width and height seemed to go up quite high but I set to 352 x 288. The machine handles it better and going larger didn't seem to improve quality.
-The only other thing in the main options under config I un ticked STRICT_VIDEO_CONFIG.
+I have 8x131 as I have 2 cards which I think is a WDT 2116. which gives me 16 inputs.
-http://www.zoneminder.com/forums/viewtopic.php?t=14438
+The only other thing in the main options under config I unticked STRICT_VIDEO_CONFIG.