Understanding ZoneMinder's Zoning system for Dummies

<Home

Background

ZoneMinder has a powerful zone detection system using which you can modify how sensitive, precise, accurate your motion alarms are. The official ZM documentation does a good job of describing all the concepts here. However, you will see gobs of posts in the forum about people complaining that ZM logs all sorts of events (ahem, as did I), ZM's detection is rubbish and in-camera is better (ahem, as did I) and what not. But once you get the concept, its incredibly powerful.

So instead of giving you a theoretical explanation, lets walk through a live use-case. (Credit: user kkroft helped a lot in me getting a hang of things here. You should also read his earlier explanation here)

Some concepts

Let's take a look at this area below. Lets suppose you want to trigger motion if someone tries to break into your basement. Does it make sense you monitor the full area (pillars/walls/floor)? Probably not. If someone were to break in, they'd break in from some door, some window, or maybe break in from upstairs and climb down the stairs. So doesn't it make more sense to monitor these areas specifically? I think so. So the first 'common sense' logic is delete the default zone that ZM creates for each monitor (which is called All). Monitoring every part of your image may make sense if you are monitoring and outdoor lawn, for example. Not here

Defining the zone areas

So given the explanation above, how about we define zones where motion matters? Any zone you define as "active" is what ZoneMinder will analyze for motion. Ignore the 'preclusive for now'. So lets look at the image below. I've defined polygons around places that are the "entry points"

Okay, now how do I specify the sensitivity of the zones?

ZoneMinder has pre-sets. We live in a world of pre-sets. I bet you want to select "Best and highly sensitive" don't you? DON'T. Not because that setting is nonsense, but because you should understand some concepts first.

Core Concepts

The ZM wiki I pointed to earlier does a great job of explaining different methods. At the cost of repeating what has already been said, its important to note:

• ZM does NOT understand objects. It only understands pixel colors. So if you are monitoring a camera that is producing a 1280x960 32bit color depth image, as far as ZM is concerned, it is getting an array of 1280*960*32 bits of data to analyze and compare a previous frame and based on 'color differences' between frame X-1 and X along with some algorithms it applies in addition to color differences, it tries and guesses if objects (in ZM speak, a specific pattern of pixels) have come up that were not there previously.

• ZM has 3 methods of detection: Alarmed Pixels, Filtered Pixels and Blobs. Here is a visual explanation of their differences

The first image is a 20x20 grid. Let's assume this is a zone. And the black circle is some object in this grid. The second image shows the next frame of that image, where new 'objects' have appeared, or in ZM's view 'new sets of pixel patterns'

Now let's talk about Alarmed Pixels, Filtered Pixels and Blobs

Alarmed Pixels

Alarmed pixels only deals with pixels changes. If we use the alarmed pixel method and specify a minimum of "5 pixel" changes (lets forget max for now), then all the new pixels of set A + B + C + D will count as alarmed pixels and the total alarmed pixel count will be A+B+C+D

Filtered Pixels

Now let's assume we used Filtered pixels and set it to 2x2 pixels. The in addition to computing the alarmed pixels (A+B+C+D), it will also count how many of these sets have at least 2 pixels around them that are also alarmed pixels. This will result in B+C+D (set A will be discarded as they don't have any pixels surrounded by at least 2 pixels that have changed color from the prev. frame)

Blob Pixels

Now lets assume we used Blob and said a blob needs to be at least 10 pixels. Then what it will do is based on the set computed by Filtered pixels, which is B+C+D it will look for contiguous blobs of 10 pixels and that only means D

So, in Alarmed pixels any of A, B, C or D would raise an alarm In filtered pixel mode, only B, C or D would raise an alarm In blob mode only D would raise an alarm

Okay, that was a simple explanation. And I did not cover more details on min/max. But I hope you get the core idea..

Yawn. Forget the theory. Let's get back to your basement image

Okay, back to my basement and my 3 zones.

Which detection type should I use?

I personally feel to detect "humans", blob is the best. As I described above, it combines Alarm + Filtered + ensures that the pixel differences are contiguous and then does an algorithmic analysis to see if it forms 'blobs'

Pixels or percents?

What makes more sense to you? "Raise an alarm if 178pixels are changed" or "Raise an alarm if more than 20% of my zone has changed?". To me, the latter makes much more sense. So I've always used percents

Right percents. But what values?

It helps to think visually here. Let's go back to the zones I drew of my basement and try and visually place how a person and a pet would look in each zone. Here is a take: