Difference between revisions of "Cisco"
From ZoneMinder Wiki
Jump to navigationJump to search
Macaddict89 (talk | contribs) |
Macaddict89 (talk | contribs) |
||
| Line 23: | Line 23: | ||
**Remote Host Path: /img/video.sav (don't forget to choose MPEG-4 Stream at cam web interface) | **Remote Host Path: /img/video.sav (don't forget to choose MPEG-4 Stream at cam web interface) | ||
**Resolution depending on NTSC or PAL | **Resolution depending on NTSC or PAL | ||
CIVS-IPC-6400 | |||
Tested on Firmware 2.5.0-10 with H.264. | |||
*Setup | |||
**Setup->Network Setup->Basic | |||
***Check boxes Disable Session ID and Enable ONVIF | |||
**Setup->Feature Setup->Streaming | |||
***If you want to use at two different resolutions be sure to follow the matrix in the Administration Guide [http://www.cisco.com/c/en/us/td/docs/security/physical_security/video_surveillance/ip_camera/6000_series/config_guide/2-7-0/config_guide/feature.html] | |||
**You can turn down Password Complexity under Administration->Password Complexity | |||
*H.264 | |||
**Source Type: Remote | |||
**Remote Protocol: RTSP | |||
** Remote Method: RTP/RTSP | |||
**Remote Host Name: user:pass@ipaddress (I created a viewer-only zoneminder account) | |||
**Remote Host Port: 554 (defined in Streaming Settings) | |||
**Remote Host Path: | |||
***Stream 1: /StreamingSetting?version=1.0&action=getRTSPStream&ChannelID=1&ChannelName=Channel1 | |||
***Stream 2: /StreamingSetting?version=1.0&action=getRTSPStream&ChannelID=3&ChannelName=Channel3 | |||
**Resolution as defined in Streaming Settings | |||
[[Category:Cameras]] | [[Category:Cameras]] | ||
[[Category:Network Cameras]] | [[Category:Network Cameras]] | ||
Revision as of 09:04, 5 November 2015
WVC80N
- MPEG-4
- Source Type: ffmpeg
- Source Path: http://##.##.##.##/img/video.asf OR http://User:Pass@##.##.##.##/img/video.asf
- MJPEG
- Remote Protocol: HTTP
- Remote Method: Simple
- Remote Host Name: ip.address (or User:pass@ip.address if you configured the cam to only allow authenticated viewing)
- Remote Host Port: 80 (or whatever port you are forwarding if remote)
- Remote Host Path: /img/video.mjpeg OR /img/mjpeg.cgi
CIVS-IPC-2611 / 2621V
- MPEG-4
- Source Type: remote
- Remote Protocol: RTSP
- Remote Method: RTP/RTSP
- Remote Host Name: User:pass@ip.address (I used admin acc)
- Remote Host Port: 554 (defined at cam web interface)
- Remote Host Path: /img/video.sav (don't forget to choose MPEG-4 Stream at cam web interface)
- Resolution depending on NTSC or PAL
CIVS-IPC-6400
Tested on Firmware 2.5.0-10 with H.264.
- Setup
- Setup->Network Setup->Basic
- Check boxes Disable Session ID and Enable ONVIF
- Setup->Feature Setup->Streaming
- If you want to use at two different resolutions be sure to follow the matrix in the Administration Guide [1]
- You can turn down Password Complexity under Administration->Password Complexity
- Setup->Network Setup->Basic
- H.264
- Source Type: Remote
- Remote Protocol: RTSP
- Remote Method: RTP/RTSP
- Remote Host Name: user:pass@ipaddress (I created a viewer-only zoneminder account)
- Remote Host Port: 554 (defined in Streaming Settings)
- Remote Host Path:
- Stream 1: /StreamingSetting?version=1.0&action=getRTSPStream&ChannelID=1&ChannelName=Channel1
- Stream 2: /StreamingSetting?version=1.0&action=getRTSPStream&ChannelID=3&ChannelName=Channel3
- Resolution as defined in Streaming Settings
