|
|
| (8 intermediate revisions by 3 users not shown) |
| Line 1: |
Line 1: |
| | | {{AllSBCAreHereLink}} |
| == '''How to install ZoneMinder on Raspberry PI 1 or 2 with Raspbian 8.1 (Jessy) 64 bit''' ==
| |
| | |
| | |
| A special Thanks to "Felixr" and "BBunge" from which I took the initial FAQ.
| |
| | |
| Prereq before starting:
| |
| * SD card created with raspbian Jessie 64bit
| |
| * filesystem is extended.
| |
| * the systems boots in console mode with autologin disabled (X is disabled)
| |
| | |
| Log in as pi
| |
| | |
| pi (followed by your root password)
| |
| | |
| sudo to root
| |
| | |
| sudo su
| |
| | |
| Configure your network and Set static IP address
| |
| | |
| nano /etc/network/interfaces
| |
| | |
| Make changes similar to this:
| |
| | |
| auto eth0
| |
|
| |
| #allow-hotplug eth0 (make sure this is commented or you will get 2 ip's)
| |
| iface eth0 inet static
| |
| address 192.168.1.10
| |
| netmask 255.255.255.0
| |
| gateway 192.168.1.1
| |
| dns-nameservers 192.168.1.1
| |
| | |
| Update Raspbian Sources
| |
| | |
| apt-get update
| |
| | |
| Check to be sure everything is up to date for the raspbian distribution
| |
| | |
| apt-get upgrade
| |
| apt-get dist-upgrade
| |
| | |
| Add the Debian Jessie backports
| |
| | |
| nano /etc/apt/sources.list
| |
| | |
| add to the top of the list:
| |
| | |
| deb http://http.debian.net/debian jessie-backports main
| |
| | |
| Ctrl+o Enter to save
| |
| CTRL+x to exit
| |
| | |
| add priority to this repository
| |
| | |
| nano /etc/apt/preferences.d/zoneminder
| |
| | |
| add to the file:
| |
| | |
| Package: *
| |
| Pin: origin http.debian.net
| |
| Pin-Priority: 1100
| |
| | |
| Ctrl+o Enter to save
| |
| CTRL+x to exit
| |
| | |
| Update Sources
| |
| | |
| apt-get update
| |
| | |
| you will get a GPG error message like this:
| |
| W: GPG error: http://http.debian.net jessie-backports InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 8B48AD6246925553 NO_PUBKEY 7638D0442B90D010
| |
| | |
| Fix this as following:
| |
| gpg --keyserver pgpkeys.mit.edu --recv-key 8B48AD6246925553
| |
| gpg -a --export 8B48AD6246925553 | sudo apt-key add -
| |
| gpg --keyserver pgpkeys.mit.edu --recv-key 7638D0442B90D010
| |
| gpg -a --export 7638D0442B90D010 | sudo apt-key add -
| |
| | |
| Update Sources again (now should go fine)
| |
| | |
| apt-get update
| |
| | |
| Package 'tar' (tar (1.29b-1~bpo8+1)) seems to be broken.
| |
| exclude tar from upgrade
| |
| aptitude hold tar
| |
| | |
| Check to be sure everything is up to date for the raspbian distribution
| |
| | |
| apt-get upgrade
| |
| apt-get dist-upgrade
| |
| | |
| | |
| Install PHP, and MySQL server (This installs MySQL server 5.5. If you want to use MySQL 5.6 follow the instructions [[Install MySQL 5.6 on Debian Jessie]] (using mariadb also works fine, as tested on Debian 8.2, replacement package for mysql-server is then mariadb-server)
| |
| | |
| apt-get install php5 mysql-server php-pear php5-mysql
| |
| | |
| Install Zoneminder
| |
| | |
| apt-get install zoneminder
| |
| | |
| You may need to install "extra" VLC components (I will check this and edit as needed)
| |
| | |
| apt-get install libvlc-dev libvlccore-dev vlc
| |
| | |
| Create Zoneminder database in MySQL (Note: this also creates the default Zoneminder user and permissions in MySQL)
| |
| | |
| This next step creates a file which contained the MySQL user and password. Otherwise you will have to enter the user and password on the command line which is not secure!
| |
| | |
| Go to the root directory
| |
|
| |
| cd ~
| |
| | |
| Create a hidden password file
| |
| | |
| nano .my.cnf
| |
| | |
| Enter this content (but use your MySQL root password!)
| |
| | |
| [client]
| |
| user=root
| |
| password=(mysqlpass)
| |
| | |
| Ctrl+o Enter to save
| |
| | |
| CTRL+x to exit
| |
| | |
| Create database (press ENTER after each command)
| |
| | |
| mysql < /usr/share/zoneminder/db/zm_create.sql
| |
| | |
| mysql -e "grant select,insert,update,delete,create on zm.* to 'zmuser'@localhost identified by 'zmpass';"
| |
| | |
| Remove password file
| |
| | |
| rm .my.cnf
| |
| | |
| Set permissions of /etc/zm/zm.conf to root:www-data 740
| |
| | |
| chmod 740 /etc/zm/zm.conf
| |
|
| |
| chown root:www-data /etc/zm/zm.conf
| |
| | |
| create link for apache (paths can differ)
| |
| ln -s /etc/zm/apache.conf /etc/apache2/conf-enabled/zoneminder.conf
| |
| | |
| Enable Zoneminder service to start at boot
| |
| | |
| systemctl enable zoneminder.service
| |
| | |
| Add www-data to the sudo group (to enable use of local video devices)
| |
| | |
| adduser www-data video
| |
| | |
| Start Zoneminder
| |
| | |
| systemctl start zoneminder.service
| |
| | |
| Check to see that Zoneminder is running
| |
| | |
| systemctl status zoneminder.service
| |
| | |
| Enable CGI and Zoneminder configuration in Apache.
| |
|
| |
| a2enmod cgi
| |
|
| |
| a2enconf zoneminder
| |
| | |
| Restart Apache
| |
| | |
| service apache2 restart
| |
| | |
| *** You may be tempted to try Zoneminder at this point but there is one setting you will need to change from the web gui. Read on!!!
| |
| | |
| Optional: Install Cambozola (needed if you use Internet Explorer)
| |
| | |
| cd /usr/src && wget http://www.andywilcock.com/code/cambozola/cambozola-latest.tar.gz
| |
| | |
| tar -xzvf cambozola-latest.tar.gz
| |
| | |
| replace 936 with cambozola version downloaded
| |
| | |
| cp cambozola-0.936/dist/cambozola.jar /usr/share/zoneminder
| |
| | |
| Kernel shared memory settings:
| |
| | |
| Set shared memory for 512MB RPi board:
| |
| 1) 128MB shhmax shared:
| |
| sudo su -
| |
| echo "kernel.shmmax = 134217728" >> /etc/sysctl.conf
| |
| exit
| |
| | |
| 2) 2MB shmall pages:
| |
| sudo su -
| |
| echo "kernel.shmall = 2097152" >> /etc/sysctl.conf
| |
| exit
| |
| | |
| Set PHPs Default Timezone
| |
| sudo nano /etc/php5/apache2/php.ini
| |
| | |
| ctrl+w to search, and type
| |
| date.timezone
| |
| | |
| Remove the initial ';' and enter your timezone from the list at http://php.net/manual/en/timezones.php
| |
| | |
| The line should look something like
| |
| date.timezone = Europe/London
| |
| ctrl + x
| |
| | |
| 'y' to save and exit
| |
| | |
| Restart Apache
| |
| | |
| service apache2 restart
| |
| | |
| You should now be able to access the web server using http://servername
| |
| | |
| Open Zoneminder in web browser
| |
| | |
| http://serverip/zm
| |
| | |
| Click Options
| |
| | |
| Uncheck: Check with zoneminder.com for updated versions (?) click Save
| |
| | |
| Click Images tab
| |
| | |
| Check Is the (optional) cambozola java streaming client installed (?) Click Save
| |
| | |
| Click Paths
| |
| | |
| Change PATH_ZMS from /cgi-bin/nph-zms to /zm/cgi-bin/nph-zms Click Save
| |
| | |
| Optional: under Paths change PATH_SWAP to /dev/shm (puts this process in RAM drive) Click Save
| |
| | |
| Restart Zoneminder
| |
| | |
| Your Zoneminder install is now ready to add cameras!
| |
