Difference between revisions of "Hikvision DS 2CD2732FIS"
From ZoneMinder Wiki
Jump to navigationJump to search
| (4 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
H.264 1080p megapixel IP dome camera [http://www.hikvision.com/ | H.264 1080p megapixel IP dome camera [http://www.hikvision.com/us/Products_1_10532_i7626.html] . | ||
These cameras work great depending on your firmware, the following firmwares are known to work with Zoneminder: | |||
:V5.0.2 build 130805 | |||
:V5.3.0 build 150513 | |||
There are multiple ways to connect these cameras to Zoneminder, either with Remote, Ffmpeg or Libvlc. But thanks to Zoneminder v1.28 or higher and the complete rebuild to the RTP receiver, the best way to connect these cameras are by using Remote. This method cuts out transcoding and drastically cuts down on CPU usage and any smudging effect caused by transcoding (Ffmpeg or Libvlc). | |||
== DS-2CD2732F-I(S) settings within the cameras WebGUI: == | |||
Remote: | |||
:Stream Type: Main Stream(Normal) | |||
:Video Type: Video Stream #Change to Video&Audio if a microphone is connected | |||
:Resolution: 1920*1080P | |||
:Bitrate Type: Constant | |||
:Video Quality: Medium | |||
:Frame Rate: 10 #Depends on needs but any setting works, higher rates just costs you on server resource consumption | |||
:Max. Bitrate: 12288 Kbps | |||
:Video Encoding: H.264 | |||
:Profile: Main Profile | |||
:I Frame Interval: 15 #This is important to keep the video in sync, might even want to drop it to 10 | |||
:SVC: Auto | |||
Ffmpeg or Libvlc: | |||
:Stream Type: Main Stream(Normal) | :Stream Type: Main Stream(Normal) | ||
:Video Type: Video Stream | :Video Type: Video Stream | ||
| Line 17: | Line 35: | ||
:I Frame Interval: 50 | :I Frame Interval: 50 | ||
== | Audio Options: | ||
:Video Type: Video&Audio | |||
:Audio Encoding: G.711uLaw | |||
:Audio Input: MicIn (unpowered microphone) or LineIn (powered microphone) | |||
:Input Volume: 75 #depends on sensitivity levels on your microphone | |||
:Environmental Noise Filter: On | |||
== DS-2CD2732F-I(S) settings within Zoneminder: == | |||
There are a few streaming channels available, depending on your version and if you have a microphone connect. Highly recommend testing the different channels to find one that best works for your system. | |||
rtsp:// /Streaming/Channels/1 | |||
rtsp:// /Streaming/Channels/101 | |||
rtsp:// /Streaming/Channels/2 | |||
rtsp:// /video.h264 | |||
rtsp:// /rtsph2641080p | |||
rtsp:// /cam1/mpeg4 | |||
rtsp:// /live/ #without audio channel | |||
rtsp:// /live.sdp/ #with audio channel | |||
When defining a monitor within Zoneminder with either type (Remote, Ffmpeg or Libvlc), most defaults will work with the exception of: | |||
Remote: | |||
General tab: | |||
:Source Type: Remote | |||
Source tab: | |||
:Remote Protocol: RTSP | |||
:Remote Method: RTP/RTSP | |||
:Remote Host Name: <username>:<password>@<ip_address> | |||
:Remote Host Port: 554 | |||
:Remote Host Path: /live/ #/live.sdp/ with microphone connected | |||
:Target colorspace: 32 bit color | |||
:Capture Width (pixels): 1920 | |||
:Capture Height (pixels): 1080 | |||
:Preserve Aspect Ratio: Unchecked | |||
:Orientation: Normal | |||
:Deinterlacing: Disabled | |||
:Use RTSP Response Media URL: Checked | |||
: | Ffmpeg or Libvlc: | ||
Source | General tab: | ||
:Source Type: Ffmpeg | |||
:Source Path : rtsp://<username>:<password>@<ip_address>:<port>/Streaming/Channels/1 | Source tab: | ||
:Remote Method : RTP/RTSP | :Source Path: rtsp://<username>:<password>@<ip_address>:<port>/Streaming/Channels/1 | ||
:Target Colorspace : 32 bit colour | :Remote Method: RTP/RTSP | ||
:Capture Width (pixels) : 1280 | :Target Colorspace: 32 bit colour | ||
:Capture Height (pixels) : 720 | :Capture Width (pixels): 1280 | ||
:Capture Height (pixels): 720 | |||
Latest revision as of 12:31, 26 August 2016
H.264 1080p megapixel IP dome camera [1] .
These cameras work great depending on your firmware, the following firmwares are known to work with Zoneminder:
- V5.0.2 build 130805
- V5.3.0 build 150513
There are multiple ways to connect these cameras to Zoneminder, either with Remote, Ffmpeg or Libvlc. But thanks to Zoneminder v1.28 or higher and the complete rebuild to the RTP receiver, the best way to connect these cameras are by using Remote. This method cuts out transcoding and drastically cuts down on CPU usage and any smudging effect caused by transcoding (Ffmpeg or Libvlc).
DS-2CD2732F-I(S) settings within the cameras WebGUI:
Remote:
- Stream Type: Main Stream(Normal)
- Video Type: Video Stream #Change to Video&Audio if a microphone is connected
- Resolution: 1920*1080P
- Bitrate Type: Constant
- Video Quality: Medium
- Frame Rate: 10 #Depends on needs but any setting works, higher rates just costs you on server resource consumption
- Max. Bitrate: 12288 Kbps
- Video Encoding: H.264
- Profile: Main Profile
- I Frame Interval: 15 #This is important to keep the video in sync, might even want to drop it to 10
- SVC: Auto
Ffmpeg or Libvlc:
- Stream Type: Main Stream(Normal)
- Video Type: Video Stream
- Resolution: 1080*720p
- Bitrate Type: Variable
- Video Quality: Medium
- Frame Rate: 10
- Max. Bitrate: 1024 Kbps
- Video Encoding: H.264
- I Frame Interval: 50
Audio Options:
- Video Type: Video&Audio
- Audio Encoding: G.711uLaw
- Audio Input: MicIn (unpowered microphone) or LineIn (powered microphone)
- Input Volume: 75 #depends on sensitivity levels on your microphone
- Environmental Noise Filter: On
DS-2CD2732F-I(S) settings within Zoneminder:
There are a few streaming channels available, depending on your version and if you have a microphone connect. Highly recommend testing the different channels to find one that best works for your system.
rtsp:// /Streaming/Channels/1 rtsp:// /Streaming/Channels/101 rtsp:// /Streaming/Channels/2 rtsp:// /video.h264 rtsp:// /rtsph2641080p rtsp:// /cam1/mpeg4 rtsp:// /live/ #without audio channel rtsp:// /live.sdp/ #with audio channel
When defining a monitor within Zoneminder with either type (Remote, Ffmpeg or Libvlc), most defaults will work with the exception of:
Remote:
General tab:
- Source Type: Remote
Source tab:
- Remote Protocol: RTSP
- Remote Method: RTP/RTSP
- Remote Host Name: <username>:<password>@<ip_address>
- Remote Host Port: 554
- Remote Host Path: /live/ #/live.sdp/ with microphone connected
- Target colorspace: 32 bit color
- Capture Width (pixels): 1920
- Capture Height (pixels): 1080
- Preserve Aspect Ratio: Unchecked
- Orientation: Normal
- Deinterlacing: Disabled
- Use RTSP Response Media URL: Checked
Ffmpeg or Libvlc:
General tab:
- Source Type: Ffmpeg
Source tab:
- Source Path: rtsp://<username>:<password>@<ip_address>:<port>/Streaming/Channels/1
- Remote Method: RTP/RTSP
- Target Colorspace: 32 bit colour
- Capture Width (pixels): 1280
- Capture Height (pixels): 720
