Difference between revisions of "Foscam C1"
From ZoneMinder Wiki
Jump to navigationJump to search
| Line 14: | Line 14: | ||
'''Other Considerations''' | '''Other Considerations''' | ||
On newer firmware for the C1 you need to enable "Onvif" in the network settings to enable the RTSP port. This can be done by accessing the local webpage for the IP address and port 88 (http://x.x.x.x:88) | * On newer firmware for the C1 you need to enable "Onvif" in the network settings to enable the RTSP port. This can be done by accessing the local webpage for the IP address and port 88 (http://x.x.x.x:88) | ||
Revision as of 21:19, 20 December 2016
General
- Source Type: FFmpeg
Source
- Source Path: rtsp://<user>:<password>@<ip>/videoMain
- Remote Method: RTP/RTSP
- Target Colorspace: 32 bit
- Capture Width: 1280
- Capture Height: 720
- Deinterlacing: Disabled
Control
- Controllable: No
Other Considerations
- On newer firmware for the C1 you need to enable "Onvif" in the network settings to enable the RTSP port. This can be done by accessing the local webpage for the IP address and port 88 (http://x.x.x.x:88)
