Difference between revisions of "Panasonic"
Nojstevens (talk | contribs) |
|||
Line 4: | Line 4: | ||
bl-c1 works on http://user:password@ip/cgi-bin/nphContinuousServerPush?Resolution=640x480&Quality=Standard | bl-c1 works on http://user:password@ip/cgi-bin/nphContinuousServerPush?Resolution=640x480&Quality=Standard | ||
BB-HCM511A and BB-HCM531A | |||
=BL-C20A= | =BL-C20A= |
Revision as of 18:51, 1 December 2009
BL-C1, BL-C10, BL-C20, BL-C30, KX-HCM10 etc (including PTZ support)
BB-HCM381. At least JPEG capture (640x480@5fps) works.
bl-c1 works on http://user:password@ip/cgi-bin/nphContinuousServerPush?Resolution=640x480&Quality=Standard
BB-HCM511A and BB-HCM531A
BL-C20A
Source type: Remote
Remote Host Name: IP Address of Camera Remote Host Port: 80 (Default) or the non-default port assigned to the camera in your network Remote host Path: /cgi-bin/nphContinuousServerPush?Resolution=640x480&Quality=Standard Control script: download at www.condrau.com/download/zmcontrol-blc30.pl
BL-C30
Source type: Remote Remote Host Name: IP Address of Camera Remote Host Port: 80 (Default) or the non-default port assigned to the camera in your network Remote host Path: nphMotionJpeg?Resolution=320x240&Quality=Standard Control script: download at www.condrau.com/download/zmcontrol-blc30.pl
The control script supports all controls for this camera, but it can be used for other Panasonic cameras as well.
Note that I implemented a real name preset functionality, where you can set any desired name as the preset name. It is basically possible to set the presets through ZM's interface, but I prefer to do it through the cam's firmware interface, which is the default setting in the script. By changing one constant definition, you may change this behaviour. In any case still activate the "can set presets" option in ZM, after which you can assign names to each preset.
I would further recommend to update the cam's firmware. I found smoother operation in ZM after having updated the firmware. [bco]