Difference between revisions of "Kodicom 8800"

From ZoneMinder Wiki
Jump to navigationJump to search
(Trying to contribute a little.. a page about the kodicom 8800 card after some research about this card :))
 
m (Some small fine touches)
Line 1: Line 1:
The Kodicom 8800 is a 8 input card with 8 BT878 chips.  
==General Information==
Real time viewing of all 8 inputs is possible because each input has a dedicated chip for it, resulting in a total of 200FPS for PAL and 240FPS for NTSC.<br>
The Kodicom 8800 is a PCI card with 8 inputs and 8 Conexant Fusion 878A (also known as BT878a) chips.<br>
Since around 2006, this card is no longer in production, however, there are many clones of this card floating around the internet at low cost.<br>
Real time monitoring of all 8 inputs is possible because each input has a dedicated chip for it, resulting in a total of 200FPS for PAL and 240FPS for NTSC.<br>
Its important to install heatsinks on the BT878 chips of this card because the chips generate a lot of heat. Without heatsinks and front case fan cooling the heatsinks, the card might not last long.
Since around 2006, this card is no longer in production, however, there are many clones of this card floating around at low cost.<br>




==Use with ZoneMinder==
==Use with ZoneMinder==
The 8 inputs are from /dev/video0 ('''0''') to /dev/video7 ('''0''').
Use the bttv driver for this card, however, this card isn't automaticly detected by the driver.
 
Use these options with the bttv driver:
Use the bttv driver with these options:
*options i2c-algo-bit bit_test=1  
*options i2c-algo-bit bit_test=1  
*options bttv gbuffers=32 card=102,102,102,102,102,102,102,102 radio=0,0,0,0,0,0,0,0 tuner=4,4,4,4,4,4,4,4 chroma_agc=1 combfilter=2 full_luma_range=1 coring=1 autoload=0
*options bttv gbuffers=32 card=102,102,102,102,102,102,102,102 radio=0,0,0,0,0,0,0,0 tuner=4,4,4,4,4,4,4,4 chroma_agc=1 combfilter=2 full_luma_range=1 coring=1 autoload=0
<br>The 8 inputs are from /dev/video0 channel '''0''' to /dev/video7 channel '''0'''.<br>
<br>Its recommended to install heatsinks on the BT878a chips of this card because the chips generate a lot of heat. Without heatsinks and front case fan cooling the heatsinks, this card might not last long.




==Limitations==
==Limitations==
At this time it appears its not possible to install more than 2 cards of this card in the same computer, the computer will detect no more than 16 BT878 chips.
At this time it appears its not possible to install more than 2 cards of this card in the same computer, the computer will detect no more than 16 BT878a chips.

Revision as of 16:38, 19 December 2009

General Information

The Kodicom 8800 is a PCI card with 8 inputs and 8 Conexant Fusion 878A (also known as BT878a) chips.
Real time monitoring of all 8 inputs is possible because each input has a dedicated chip for it, resulting in a total of 200FPS for PAL and 240FPS for NTSC.
Since around 2006, this card is no longer in production, however, there are many clones of this card floating around at low cost.


Use with ZoneMinder

Use the bttv driver for this card, however, this card isn't automaticly detected by the driver. Use these options with the bttv driver:

  • options i2c-algo-bit bit_test=1
  • options bttv gbuffers=32 card=102,102,102,102,102,102,102,102 radio=0,0,0,0,0,0,0,0 tuner=4,4,4,4,4,4,4,4 chroma_agc=1 combfilter=2 full_luma_range=1 coring=1 autoload=0


The 8 inputs are from /dev/video0 channel 0 to /dev/video7 channel 0.

Its recommended to install heatsinks on the BT878a chips of this card because the chips generate a lot of heat. Without heatsinks and front case fan cooling the heatsinks, this card might not last long.


Limitations

At this time it appears its not possible to install more than 2 cards of this card in the same computer, the computer will detect no more than 16 BT878a chips.