Maygion

== Documentation to setup Maygion IP CAM (or clones) ==

Camera IP-603 (wifi/LAN) -> http://www.maygion.com/Picfiles/ip-603.jpg Camera IP-604 (LAN) -> http://www.maygion.com/Picfiles/ip-604.jpg

---

Support/downloads-> http://www.maygion.com/

Camera specs-> http://www.maygion.com/product_ui.html

CGI commands manual-> http://www.maygion.com/downloads/20091208/IPCamera%20CGI%20manual.pdf

---

I recommend to setup the camera settings using Windows (yes...I have to recognize that using the ActiveX 

and IE makes it easier than sending CGI commands...., am I lazy?), but you could setup your camera

using CGI commands like:

* Setting video resolution: 
       QVGA(320x240) -> http://XXX.XXX.XXX.XXX/cgi.cmd?cmd=setqvga?usr=your_user&pwd=your_pwd
       VGA(640x480) -> http://XXX.XXX.XXX.XXX/cgi.cmd?cmd=setvga?usr=your_user&pwd=your_pwd

---

== Zoneminder settings (these are the settings I'm using, change them to match your needs as appropriate): ==

General Tab: Source Type : Remote Enabled : checked Maximum FPS : 6 Alarm Maximum FPS : 12 Reference Image Blend %ge : 9

Source Tab: Remote Protocol: HTTP Remote Method: Simple Remote Host Name: put.your.cam.ip Remote Host Port: 80 Remote Host Path: /snapshot.cgi?usr=your_user&pwd=your_pwd Remote Image Colors: 24 bit color Capture Width (pixels): 320 Capture Height (pixels):240

Buffers: Image Buffer Size (frames): 40 Warmup Frames: 18 Pre Event Image Count: 18 Post Event Image Count: 60 Stream Replay Image Buffer: 480 Alarm Frame Count: 4

Hope it helps,

PacoLM