Difference between revisions of "Level One"

From ZoneMinder Wiki
Jump to navigationJump to search
m
Line 9: Line 9:
=== WCS-2003 ===
=== WCS-2003 ===


This camera works for MP4 or MJPEG. Additional to the information above the remote path  
This camera supports MP4 or MJPEG. Additional to the information above the remote path  
is different:
is different:


* MP4 stream remote path: /img/video.asf
* MP4 stream remote path: /img/video.asf  
* MJPEG stream remote path: /img/mjpeg.jpg (not yet fully tested)
 
Select as source type:  Ffmpeg <br/>
Source Path: <nowiki>http://<your_camera_ip>/img/video.asf</nowiki> <br/>
Set capture width and capture hight according the configuration settings of your camera <br/>
 
* MJPEG stream remote path: /img/mjpeg.jpg (not yet fully tested)  


This camera has a Linux based firmware. The source code of the firmware is available at the  
This camera has a Linux based firmware. The source code of the firmware is available at the  
[http://www.level-one.de/levelone.php?page=prod&cat=7004&model=WCS-2003&show=downloads#tabs Level One WCS-2003 page]<br/>
[http://www.level-one.de/levelone.php?page=prod&cat=7004&model=WCS-2003&show=downloads#tabs Level One WCS-2003 page]<br/>
file [http://download.level1.info/gpl/WCS-2003(GPL)_2004-07-28.zip WCS-2003(GPL)_2004-07-28.zip]
file [http://download.level1.info/gpl/WCS-2003(GPL)_2004-07-28.zip WCS-2003(GPL)_2004-07-28.zip]


=== Other Level One cameras (not tested) ===
=== Other Level One cameras (not tested) ===

Revision as of 16:01, 23 February 2011

General information

This camera(s) work fine with zoneminder.

  • Remote Host Name: user:password@<ip>
  • Remote Host Port: 80 (is default, alternative 1024 when you've setup this port by webconfig)
  • Remote Host Path: /img/video.mjpeg


WCS-2003

This camera supports MP4 or MJPEG. Additional to the information above the remote path is different:

  • MP4 stream remote path: /img/video.asf

Select as source type: Ffmpeg
Source Path: http://<your_camera_ip>/img/video.asf
Set capture width and capture hight according the configuration settings of your camera

  • MJPEG stream remote path: /img/mjpeg.jpg (not yet fully tested)

This camera has a Linux based firmware. The source code of the firmware is available at the Level One WCS-2003 page
file WCS-2003(GPL)_2004-07-28.zip

Other Level One cameras (not tested)

Note: This is not tested, just for infomation.

This information is from here:

Following cameras use URL http://IP-AddressCamera/cdi-bin/video.jpg:
FCS-1010, FCS-1030, FCS-1040, FCS-1060, FCS-1070, FCS-3000, FCS-3021, WCS-2010, WCS-2030, WCS-2040, WCS-2060, WCS-2070

The cameras FCS-0010, FCS-0020, FCS-1091, WCS-0010, WCS-0020, WCS-1090 are supporting MJPG, the URL is
http://IP-address/video.mjpg

For the cameras FCS-1081, FCS-1081A, FCS-4000, FCS-4100, FCS-4200, FCS-4300, FCS-4400, FCS-4500, FCS-7011 the command to get the actual JPG image is:
http://ip_address_of_camera/cgi-bin/jpg/image and then http://ip_address_of_camera/jpg/image.jpg or for MJPG http://IPaddresse:port/video.mjpg

The SDK´s for the Level One cameras could be downloaded from:

http://www.level1.tw/level1/other/SDK_2008-01-24.zip