Difference between revisions of "Amcrest QCam"
From ZoneMinder Wiki
Jump to navigationJump to search
(Updated the 842E string. This is a working configuration, the previous one failed.) |
|||
| Line 31: | Line 31: | ||
'''Source''' | '''Source''' | ||
*Source Path: rtsp://<username>:<password>@<ip_address>:554/cam/realmonitor?channel=1&subtype=0&unicast=true&proto=Onvif | *Source Path: rtsp://<username>:<password>@<ip_address>:554/cam/realmonitor?channel=1&subtype=0&unicast=true&proto=Onvif | ||
Note: a recent one of these cameras with 2.520.0000 firmware did not work with that URL, but taking off the &proto=Onvif made it work. | |||
*Remote Method: RTP/RTSP | *Remote Method: RTP/RTSP | ||
*Capture Width (pixels) : 1920 | *Capture Width (pixels) : 1920 | ||
Revision as of 08:37, 8 September 2017
IP3M952E
General
- Source Type: Ffmpeg
Source
- Source Path: rtsp://admin@12345<ip_address>:554/h264Preview_01_main
- Remote Method: RTP/RTSP
- Capture Width (pixels) : 2304
- Capture Height (pixels): 1314
IP2M-842E
Amcrest HTTP API for IP Cameras
H.264
On the Camera:
- Setup->Camera->Video->Main Stream
- Encode Mode: H.264
Zoneminder:
General
- Source Type: Ffmpeg
Source
- Source Path: rtsp://<username>:<password>@<ip_address>:554/cam/realmonitor?channel=1&subtype=0&unicast=true&proto=Onvif
Note: a recent one of these cameras with 2.520.0000 firmware did not work with that URL, but taking off the &proto=Onvif made it work.
- Remote Method: RTP/RTSP
- Capture Width (pixels) : 1920
- Capture Height (pixels): 1080
