Difference between revisions of "Foscam FI9805W"
(Created page with "H.264 megapixel IP camera [http://foscam.co.uk/products/foscam-fi9805w-outdoor-wireless-ip-camera.html] . The camera I have working successfully with Zoneminder is running th...") |
|||
| Line 1: | Line 1: | ||
H.264 megapixel IP camera [http://foscam.co.uk/products/foscam-fi9805w-outdoor-wireless-ip-camera.html] . | H.264 720p megapixel IP camera [http://foscam.co.uk/products/foscam-fi9805w-outdoor-wireless-ip-camera.html] . | ||
The camera I have working successfully with Zoneminder is running the following firmware: | The camera I have working successfully with Zoneminder is running the following firmware: | ||
Revision as of 11:26, 7 December 2013
H.264 720p megapixel IP camera [1] .
The camera I have working successfully with Zoneminder is running the following firmware:
- Software Firmware Version 1.4.1.7
- Application Firmware Version 1.14.1.21
There are known issues with RTSP streaming on earlier firmwares than the above, with the RTSP connection become unavailable after a few hours when used with Zoneminder (or VLC, for that matter). This often requires a soft or hard reboot of the camera to get it working again. Indeed, even with this firmware, RTSP generates errors, but I've found the following camera settings to be reliable:
- Stream Type 0
- Resolution 720P
- Bit Rate 512K
- Frame Rate 10
You may get away with a higher Bit and Frame Rate but, using Zoneminder 1.26.3, I find I get smearing with anything much above what's listed here.
It's also worth noting that the camera halves the Frame Rate when it switches to night view, so the above will give 5fps when it gets dark.
Using the FI9805W with Zoneminder :
Videostream:
Default settings, with the exception of:
General
- Source Type : Ffmpeg
Source
- Source Path : rtsp://<username>:<password>@<ip_address>:<port>/videoMain
- Target Colorspace : 32 bit colour
- Capture Width (pixels) : 1280
- Capture Height (pixels) : 720
