Difference between revisions of "Foscam FI9821W V2"
(Created page with "Foscam FI9821W V2 with control With the newer version of the Foscam firmware you are prompted to change the default login. I did this then added another user called admin. I'...") |
(No difference)
|
Revision as of 14:41, 9 September 2015
Foscam FI9821W V2 with control
With the newer version of the Foscam firmware you are prompted to change the default login. I did this then added another user called admin. I'm not sure if this is necessary but I was able to get the camera to work with control.
Camera Video Settings: Stream Type HD Mode Resolution 720P Bit Rate 128K Frame Rate 5 Key Frame Interval 50 Variable bitrate Yes
Zoneminder Monitor Settings: Source Type Ffmpeg Function Modect (or your choice) Source Path rtsp://admin:(Password)@IP-Address:88/videoMain Remote Method RTP/Unicast Capture Width 640 Capture Height 320 Control Type Foscam FI9821W (see note 1) Control Device (Password) (see note 2) Control Address IP-Address:88 Auto Stop Timeout 1
Note 1: Edit Foscam FI9821W and remove check marks in Zoom, Focus, White, Iris, and change Presets number from 16 to 8
Note 2: You may be able to use just the camera password or user=(user)&pwd=(password)
You should be able to use higher or lower resolutions but keep the WidthxHeight ratio within the 640x320 value
