Difference between revisions of "Foscam FI9821W V2"
(Created page with "Foscam FI9821W V2 with control With the newer version of the Foscam firmware you are prompted to change the default login. I did this then added another user called admin. I'...") |
|||
| Line 3: | Line 3: | ||
With the newer version of the Foscam firmware you are prompted to change the default login. I did this then added another user called admin. I'm not sure if this is necessary but I was able to get the camera to work with control. | With the newer version of the Foscam firmware you are prompted to change the default login. I did this then added another user called admin. I'm not sure if this is necessary but I was able to get the camera to work with control. | ||
Camera Video Settings: | Camera Video Settings: | ||
Stream Type HD Mode | Stream Type HD Mode | ||
Resolution 720P | Resolution 720P | ||
Bit Rate 128K | Bit Rate 128K | ||
Frame Rate 5 | Frame Rate 5 | ||
Key Frame Interval 50 | Key Frame Interval 50 | ||
Variable bitrate Yes | Variable bitrate Yes | ||
Zoneminder Monitor Settings: | Zoneminder Monitor Settings: | ||
Source Type Ffmpeg | Source Type Ffmpeg | ||
Function Modect (or your choice) | Function Modect (or your choice) | ||
Source Path rtsp://admin:(Password)@IP-Address:88/videoMain | Source Path rtsp://admin:(Password)@IP-Address:88/videoMain | ||
Remote Method RTP/Unicast | Remote Method RTP/Unicast | ||
Capture Width 640 | Capture Width 640 | ||
Capture Height 320 | Capture Height 320 | ||
Control Type Foscam FI9821W (see note 1) | Control Type Foscam FI9821W (see note 1) | ||
Control Device (Password) (see note 2) | Control Device (Password) (see note 2) | ||
Control Address IP-Address:88 | Control Address IP-Address:88 | ||
Auto Stop Timeout 1 | Auto Stop Timeout 1 | ||
Revision as of 14:42, 9 September 2015
Foscam FI9821W V2 with control
With the newer version of the Foscam firmware you are prompted to change the default login. I did this then added another user called admin. I'm not sure if this is necessary but I was able to get the camera to work with control.
Camera Video Settings:
Stream Type HD Mode
Resolution 720P
Bit Rate 128K
Frame Rate 5
Key Frame Interval 50
Variable bitrate Yes
Zoneminder Monitor Settings:
Source Type Ffmpeg
Function Modect (or your choice)
Source Path rtsp://admin:(Password)@IP-Address:88/videoMain
Remote Method RTP/Unicast
Capture Width 640
Capture Height 320
Control Type Foscam FI9821W (see note 1)
Control Device (Password) (see note 2)
Control Address IP-Address:88
Auto Stop Timeout 1
Note 1: Edit Foscam FI9821W and remove check marks in Zoom, Focus, White, Iris, and change Presets number from 16 to 8
Note 2: You may be able to use just the camera password or user=(user)&pwd=(password)
You should be able to use higher or lower resolutions but keep the WidthxHeight ratio within the 640x320 value
