Foscam FI9821W V2

From ZoneMinder Wiki
Revision as of 14:41, 9 September 2015 by Bbunge (talk | contribs) (Created page with "Foscam FI9821W V2 with control With the newer version of the Foscam firmware you are prompted to change the default login. I did this then added another user called admin. I'...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search

Foscam FI9821W V2 with control

With the newer version of the Foscam firmware you are prompted to change the default login. I did this then added another user called admin. I'm not sure if this is necessary but I was able to get the camera to work with control.

Camera Video Settings: Stream Type HD Mode Resolution 720P Bit Rate 128K Frame Rate 5 Key Frame Interval 50 Variable bitrate Yes

Zoneminder Monitor Settings: Source Type Ffmpeg Function Modect (or your choice) Source Path rtsp://admin:(Password)@IP-Address:88/videoMain Remote Method RTP/Unicast Capture Width 640 Capture Height 320 Control Type Foscam FI9821W (see note 1) Control Device (Password) (see note 2) Control Address IP-Address:88 Auto Stop Timeout 1

Note 1: Edit Foscam FI9821W and remove check marks in Zoom, Focus, White, Iris, and change Presets number from 16 to 8

Note 2: You may be able to use just the camera password or user=(user)&pwd=(password)

You should be able to use higher or lower resolutions but keep the WidthxHeight ratio within the 640x320 value

Retrieved from "https://wiki.zoneminder.com/index.php?title=Foscam_FI9821W_V2&oldid=6961"