ICamviewRelay
This is a small application that can be used to allow an ICamview to be used with Zoneminder.
There are 2 methods of getting images out of this. You can do jpeg grabs by sending a url, but it redirects you to a login page the first time you try to access the image and it's not any kind of standard http login method, so I gave up on that.
To get streaming images it uses udp, and a little bit of playing about with ethereal let me work out the protocol well enough to knock up a relay app that gets jpegs using the udp method and sends them out as an mjpeg stream. You can then connect to the relay as if it were a network camera. Unfortunately (depending on your point of view) it's written in java as that's what I do for a living and I haven't had time to relearn C and all the sockets/threading stuff. If anyone wants to port it to C then feel free, but please post it back here so I can use it!
usage is:
java -cp . ICamviewRelay <icamview ip addr> <icamview port> <fps> <local server port> <icamview user> <icamview pass>
to compile it:
javac -cp . ICamviewRelay.java
this works perfectly..! with the following entry in the Remote Host Path /icamviewrelay?cam=01
