Difference between revisions of "Sony"
m |
|||
| Line 1: | Line 1: | ||
Link to the Sony SNC patches for 1.22.1: | Link to the Sony SNC patches for 1.22.1:<br> | ||
[http://www.neufweb.org/zm_remote_camera-patches.tgz zm_remote_camera-patches.tgz] | [http://www.neufweb.org/zm_remote_camera-patches.tgz zm_remote_camera-patches.tgz]<br> | ||
<br> | |||
Excerpt from the forum post regarding setup: | Excerpt from the forum post regarding setup:<br> | ||
<br> | |||
For now, you must set the camera to the following configuration using (gulp) Internet Explorer: | For now, you must set the camera to the following configuration using (gulp) Internet Explorer:<br> | ||
<br> | |||
MJPEG Mode | MJPEG Mode<br> | ||
320x240 Image size | 320x240 Image size<br> | ||
Frame rate 5 (or another value of your choice - just remember it for creating the monitor - the values must match for now) | Frame rate 5 (or another value of your choice - just remember it for creating the monitor - the values must match for now)<br> | ||
Microphone disabled | '''Microphone disabled'''<br> | ||
<br> | |||
Then, you can create a new monitor with the following values: | Then, you can create a new monitor with the following values:<br> | ||
<br> | |||
General | '''General'''<br> | ||
Name: <Your Choice> | Name: <Your Choice><br> | ||
Source: Remote | Source: Remote<br> | ||
Function: Monitor | Function: Monitor<br> | ||
Maximum FPS: 5 (or the value you set with Internet Explorer) | Maximum FPS: 5 (or the value you set with Internet Explorer)<br> | ||
<br> | |||
Source | '''Source'''<br> | ||
Remote Host Name: username:password@<camera ip address> | Remote Host Name: username:password@<camera ip address><br> | ||
Remote Host Port: <camera remote port> (usually 9000 unless you changed) | Remote Host Port: <camera remote port> (usually 9000 unless you changed)<br> | ||
Remote Host Path: /mjpeg?speed=5 (or the speed value you set with Internet Explorer) | Remote Host Path: /mjpeg?speed=5 (or the speed value you set with Internet Explorer)<br> | ||
Remote Image Colours: 24 bit colour | Remote Image Colours: 24 bit colour<br> | ||
Capture Width: 320 | Capture Width: 320<br> | ||
Capture Height: 240 | Capture Height: 240<br> | ||
<br> | |||
Once that's set, you should see video when you watch the new monitor! | Once that's set, you should see video when you watch the new monitor!<br> | ||
Revision as of 13:11, 30 May 2006
Link to the Sony SNC patches for 1.22.1:
zm_remote_camera-patches.tgz
Excerpt from the forum post regarding setup:
For now, you must set the camera to the following configuration using (gulp) Internet Explorer:
MJPEG Mode
320x240 Image size
Frame rate 5 (or another value of your choice - just remember it for creating the monitor - the values must match for now)
Microphone disabled
Then, you can create a new monitor with the following values:
General
Name: <Your Choice>
Source: Remote
Function: Monitor
Maximum FPS: 5 (or the value you set with Internet Explorer)
Source
Remote Host Name: username:password@<camera ip address>
Remote Host Port: <camera remote port> (usually 9000 unless you changed)
Remote Host Path: /mjpeg?speed=5 (or the speed value you set with Internet Explorer)
Remote Image Colours: 24 bit colour
Capture Width: 320
Capture Height: 240
Once that's set, you should see video when you watch the new monitor!
