Difference between revisions of "Ubuntu Server 14.04 64-bit with Zoneminder 1.32.x the easy way"
Line 1: | Line 1: | ||
===Notice: the 1.32.0 installs have been pulled from the zoneminder PPA due to some reported issues. There is a "test" version on the zoneminder-master PPA but it is not recommended fro a production Zoneminder system. 17SEP18=== | |||
'''Zoneminder 1.32.0 on Ubuntu Server 14.04''' | '''Zoneminder 1.32.0 on Ubuntu Server 14.04''' | ||
'''We recommend you read the release notes to see what has changed in this version. The release notes can be found here: https://github.com/ZoneMinder/zoneminder/releases''' | '''We recommend you read the release notes to see what has changed in this version. The release notes can be found here: https://github.com/ZoneMinder/zoneminder/releases''' |
Revision as of 11:13, 17 September 2018
Notice: the 1.32.0 installs have been pulled from the zoneminder PPA due to some reported issues. There is a "test" version on the zoneminder-master PPA but it is not recommended fro a production Zoneminder system. 17SEP18
Zoneminder 1.32.0 on Ubuntu Server 14.04
We recommend you read the release notes to see what has changed in this version. The release notes can be found here: https://github.com/ZoneMinder/zoneminder/releases
Install Basic Server (if you used the mini.iso), OpenSSH Server, and LAMP Server
Log in then become root:
sudo su
Make sure you are up to date
apt-get update apt-get upgrade apt-get dist-upgrade
Add Repository (if you get an error run: apt-get install software-properties-common)
add-apt-repository ppa:iconnor/zoneminder
Update Sources
apt-get update
Install Zoneminder
apt-get install zoneminder
You may be prompted to set up Nulmailer. You may accept the defaults and set this up later if you want to use it.
Add delay to allow MySQL to start before Zoneminder
nano /etc/init.d/zoneminder
Add sleep 15 after the existing "start() {" as shown:
start() { sleep 15 echo -n "Starting $prog: "
Ctrl+o Enter to save
CTRL+x to exit
Create a new user
adduser www-data video
Enable CGI, Zoneminder and rewrite configuration in Apache.
a2enmod cgi
a2enconf zoneminder
a2enmod rewrite
Start Zoneminder if needed (If you get an error Zoneminder is likely running already)
service zoneminder start
Add timezone to PHP
nano /etc/php5/apache2/php.ini
Search for [Date] (Ctrl + w then type Date and press Enter) and make changes as follows for your time zone
[Date] ; Defines the default timezone used by the date functions ; http://php.net/date.timezone date.timezone = America/New_York
Ctrl+o Enter to save
CTRL+x to exit
Restart Apache
service apache2 reload
Open Zoneminder in a web browser (http://server-ip/zm).