Difference between revisions of "Ubuntu Server 18.04 64-bit with Zoneminder 1.30.4 the easy way"

From ZoneMinder Wiki
Jump to navigationJump to search
Line 5: Line 5:
'''
'''


19JAN19 I have gone over these procedures and made corrections as needed. While not tested today other than the download link they should still work. '''
'''23JAN19 I have gone over these procedures and made corrections as needed. Tested/verified as long as the download server stays online. ''''''


===Ubuntu 18.04 AMD64 with LAMP and Zoneminder 1.30.4 Shell Script===
===Ubuntu 18.04 AMD64 with LAMP and Zoneminder 1.30.4 Shell Script===

Revision as of 14:07, 23 January 2019

Ubuntu 18.04 with Zoneminder 1.30.4 Install Procedure

23JAN19 I have gone over these procedures and made corrections as needed. Tested/verified as long as the download server stays online. '

Ubuntu 18.04 AMD64 with LAMP and Zoneminder 1.30.4 Shell Script

This will install Zoneminder by using a shell script with one basic command (how easy is that!).

You will need a Ubuntu 18.04 install with LAMP (Apache, MySQL and PHP) installed desktop or server. As an alternate you may use Mariadb in lieu of MySQL

Shell script file contents:

#!/bin/sh
clear
read -p "This script installs Zoneminder 1.30.4 on Ubuntu 18.04 AMD64 with LAMP (MySQL) installed...
Press Enter to continue or Ctrl + c to quit" nothing
clear
read -p "You must be logged in as root using sudo su ...
Press Enter to continue or Ctrl + c to quit" nothing
clear
read -p "Next secure MySQL server by entering requested information. Press enter to continue" nothing
mysql_secure_installation
read -p "Next we will download the Zoneminder install package and install it.
Press enter to continue" nothing
wget --no-check-certificate https://173.163.189.225/zoneminder-1.30.4-bionic-amd64.deb -P /tmp/
ls /tmp/zoneminder*
read -p "Check above to be sure the file downloaded. Should be:
/tmp/zoneminder-1.30.4-bionic-amd64.deb (5686708)
Press Enter to continue or Ctrl + c to quit" nothing
clear
awk '$0="date.timezone = "$0' /etc/timezone >> /etc/php/7.2/apache2/php.ini
echo "[mysqld]" >> /etc/mysql/my.cnf
echo "init_connect = 'SET @@sql_mode = CASE CURRENT_USER() WHEN \'zmuser@localhost\' THEN \'NO_ENGINE_SUBSTITUTION\' ELSE @@sql_mode END;'" >> /etc/mysql/my.cnf
systemctl restart mysql
apt-get -y install /tmp/zoneminder-1.30.4-bionic-amd64.deb
systemctl enable zoneminder
service zoneminder start
adduser www-data video
a2enmod cgi
a2enconf zoneminder
a2enmod rewrite
chown -R www-data:www-data /usr/share/zoneminder/
service apache2 reload
clear
read -p "Open Zoneminder in a web browser (http://server-ip/zm). 
Click on Options - Paths and change PATH_ZMS to /zm/cgi-bin/nph-zms 
Click the Save button. 
Press enter to continue" nothing
clear

Copy the contents of the script, open a terminal and run:

nano zm-install

Paste the contents of the script into Nano

Then:

Ctrl + o
Ctrl + x

Next run:

chmod 755 zm-install

Start the script by entering:

./zm-install

Follow the prompts. Things are pretty simple. The timezone will be detected from the OS and added to the php.ini.

Good Luck!

While this script worked for me I can't be responsible if you loose data when you run this. It is intended for a new install not an upgrade.

Ubuntu 18.04 AMD64 with LAMP and Zoneminder 1.30.4 Manual Install

25APR18 - Zoneminder has been removed from the Ubuntu 18.04, Bionic, repository. PHP updates to version 7.2 also caused some problems which have been resolved (I hope!). This procedure uses a patched install from Zesty along with cakephp and crud updates to work with PHP7.2

Ubuntu 18.04 Bionic installed with LAMP and OpenSSH Server 64 BIT Ubuntu only!

To better manage the MySQL server I recommend you copy the sample config file and replace the default my.cnf symbolic link.

This removes the current symbolic link

rm /etc/mysql/my.cnf  

This moves the MYSQL Configuration file

cp /etc/mysql/mysql.conf.d/mysqld.cnf /etc/mysql/my.cnf

To change MySQL settings:

nano /etc/mysql/my.cnf

In the [mysqld] section add the following

sql_mode = NO_ENGINE_SUBSTITUTION

Note: if you are installing on an existing database server you can use the folowing as an alternate (Thanks to "bodom" for this alternate):

init_connect = 'SET @@sql_mode = CASE CURRENT_USER() WHEN \'zmuser@localhost\' THEN \'NO_ENGINE_SUBSTITUTION\' ELSE @@sql_mode END;'

Ctrl+o Enter to save

CTRL+x to exit

Restart MySQL

systemctl restart mysql

Secure MySQL and set root password. Do not install the password validation plugin as the default Zoneminder password is not strong.

mysql_secure_installation

Dowmload the Zoneminder install package:

wget --no-check-certificate https://173.163.189.225/zoneminder-1.30.4-bionic-amd64.deb -P /tmp/

Install Zoneminder

apt install /tmp/zoneminder-1.30.4-bionic-amd64.deb

Enable Zoneminder service to start at boot

systemctl enable zoneminder.service

Add www-data to the sudo group (to enable use of local video devices)

adduser www-data video

Start Zoneminder

systemctl start zoneminder.service

Enable CGI and Zoneminder configuration in Apache.

a2enmod cgi
a2enmod rewrite
a2enconf zoneminder

Add timezone to PHP

nano /etc/php/7.2/apache2/php.ini

Search for [Date] (Ctrl + w then type Date and press Enter) and make changes as follows for your time zone. Be sure to remove the ; before date.timezone

[Date]

Defines the default timezone used by the date functions
http://php.net/date.timezone

date.timezone = America/New_York

Ctrl+o Enter to save

CTRL+x to exit

Change permissions in /usr/share/zoneminder/

chown -R www-data:www-data /usr/share/zoneminder/


Restart Apache

service apache2 restart

IMPORTANT FINAL STEP: Open Zoneminder in a web browser (http://server-ip/zm). Click on Options - Paths and change PATH_ZMS to /zm/cgi-bin/nph-zms

Ubuntu 18.04 LEMP (NGNIX, Mariadb, PHP)

Start with a basic Ubuntu 18.04 install. You can use a server or desktop install. Do not install LAMP!

Become root

sudo su

Install Ngnix, Mariadb and PHP components

apt install nginx mariadb-server php-fpm php-mysql fcgiwrap

Secure the Mariadb server

mysql_secure_installation

Restart Mariadb

systemctl restart mysql

Edit the php.ini file

nano /etc/php/7.2/fpm/php.ini

Locate (Ctrl+w) cgi.fix_pathinfo=1 and change to

cgi.fix_pathinfo=0

Remember to remove the leading ;

Also fix date. Search for [Date] (Ctrl + w then type Date and press Enter) and make changes as follows for your time zone. Make sure to remove the ; from the front of date.timezone

[Date]
; Defines the default timezone used by the date functions
; http://php.net/date.timezone
date.timezone = America/New_York

Ctrl+o Enter to save

CTRL+x to exit

Restart php-fpm

systemctl restart php7.2-fpm

Download the Zoneminder install package. This may take a minute to connect

wget --no-check-certificate https://173.163.189.225/zoneminder-1.30.4-bionic-amd64.deb -P /tmp/

Install Zoneminder

apt install /tmp/zoneminder-1.30.4-bionic-amd64.deb

Create a new user

adduser www-data video

Fix Permissions

chown -R www-data:www-data /usr/share/zoneminder/

Enable and start Zoneminder

systemctl enable zoneminder
service zoneminder start


Edit the Ngnix default configuration.

nano /etc/nginx/sites-available/default

Locate the line "index index.html index.htm index.nginx-debian.html;" and add index.php

index index.php index.html index.htm index.nginx-debian.html;

Ctrl+o Enter to save

CTRL+x to exit

Create a Zoneminder conf file

nano /etc/nginx/zoneminder.conf

Enter the following into the zoneminder.conf file (This file was improved by databoy2k)

location /zm/cgi-bin {
    gzip off;
    alias /usr/lib/zoneminder/cgi-bin;

    include /etc/nginx/fastcgi_params;
    fastcgi_param SCRIPT_FILENAME $request_filename;
    fastcgi_pass  unix:/var/run/fcgiwrap.socket;
}

location /zm {
#   if ($scheme ~ ^http:){
#       rewrite ^(.*)$  https://$host$1 permanent;
#   }

    gzip off;
    alias                   /usr/share/zoneminder/www;
    index                   index.php;

    location ~ \.php$ {
        if (!-f $request_filename) { return 404; }
        expires             epoch;
        include             /etc/nginx/fastcgi_params;
        fastcgi_param       SCRIPT_FILENAME         $request_filename;
        fastcgi_index       index.php;
        fastcgi_pass        unix:/var/run/php/php7.2-fpm.sock;
    }


    location ~ \.(jpg|jpeg|gif|png|ico)$ {
        access_log          off;
        expires         33d;
    }

    location /zm/api/ {
        alias                   /usr/share/zoneminder/www/api;
        rewrite ^/zm/api(.+)$ /zm/api/index.php?p=$1 last;
    }
}

Ctrl+o Enter to save

CTRL+x to exit

Edit the default sites enabled

nano /etc/nginx/sites-enabled/default

In the "server" section after listen [::] :80 default_Server; add

include /etc/nginx/zoneminder.conf;

Ctrl+o Enter to save

CTRL+x to exit

Restart Ngnix

service nginx restart

Note: If Nginx gives you an error on restart go back one step and re-enter include /etc/ngnix/zoneminder.conf;

IMPORTANT FINAL STEP: Open Zoneminder in a web browser (http://server-ip/zm). Click on Options - Paths and change PATH_ZMS to /zm/cgi-bin/nph-zms

Note: 29JUL18 Thanks to Tiver for this suggestion that seems to work with the fcgiwrap issue.

If it does not exist create

nano /etc/default/fcgiwrap

and insert (with the number of children -c equal to the number of cameras)

DAEMON_OPTS=-c 10

then restart the fcgiwrap service.

systemctl restart fcgiwrap