From ZoneMinder Wiki
Revision as of 19:29, 3 March 2009 by Kingofkya (talk | contribs) (UPCOMEING 1.24)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search

(Not needed for zoneminder 1.24.* and up see forum)

A way to get the stream from mpeg4 only capable ip cams ( or other encoding also ) captured in zm:

This way work better in terms of load and FPS than the method of save a single frame a time with mplayer in jpeg.

You need: - ffmpeg - vloopback (http://www.lavrsen.dk/twiki/bin/view/Motion/VideoFourLinuxLoopbackDevice) - vpipe (http://download.astronomix.org/vpipe-0.0.2.tgz )

compile vloopback and modprobe it to create a v4l loopback device. It create a videoN and videoN+1 couple of devices, /dev/video0 and /dev/video1 for example. In this case, video0 is the input device, and video1 is the output device.

Now. with ffmpeg, do something like: ffmpeg -i http://<ip_of_your_cam>/img/video.asf -r 8 -f rawvideo - | ./vpipe -f <format> -i 0 where 0 mean "/dev/video0"

Now you can simply create a monitor that point to /dev/video1 chan 0 whith the same resolution and color palette of your ffmpeg formatted output, and you get your cam work with zoneminder

Ther's also a little and crappy daemon written in python to automatize the use of vpipe + vloopback with ffmpeg for multiple cams here: http://download.astronomix.org/ZMmpeg4.tgz

Read "README" file inside the tarball for instruction on how to use it.

If you hare on debian sid: deb http://packages.medianix.net/ mercury main

apt-get/aptitude install vpipe

m-a get vloopback-source

m-i build vloopback-source