AirLive AirCam OD325HD
From ZoneMinder Wiki
Jump to navigationJump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
The AirLive AirCam OD-325HD POE camera seems to work fine with these monitor settings:
Getting streams in HTTP
- Source Type: Remote
- Remote Protocol: HTTP
- Remote Method: Simple
- Remote Host Name (example): zoneminder:MYPASSWORD@192.168.1.3
- Remote Host Port: 80
- Remote Host Path: mjpg/video.cgi?0.mjpg
- Target Colorspace: 24 bit color
- Capture Width (pixels): 1280
- Capture Height (pixels): 1024
Getting streams in RTSP
Point your monitor to a ffmpeg source to rtsp://<username>:<password>@<camera-ip>/media.amp?videocodec=<codec>&resolution=<res>&compression=<percent>&fps=<frames>&videokeyframeinterval=<interval>&videobitrate=<rate> to get the stream. There is no need to pass all parameters.
Where:
- codec: h264, mpeg4, mjpeg.
- res: sxga, vga, qvga, qqvga (codec dependent).
- percent: 1 - 100.
- frames: 1 - 30 (resolution dependent).
- interval: 1 - 60.
- rate: 32 - 4096 (resolution dependent).
Examples:
- rtsp://192.168.0.100/media.amp?videocodec=h264&resolution=sxga&compression=100&fps=15&videokeyframeinterval=30&videobitrate=3072
- rtsp://admin:airlive@192.168.0.100/media.amp?videocodec=mpeg4&resolution=vga&fps=30
Notes:
You cannot get all resolution with all codec, for example to get SXGA you have to use H264 or MJPEG. For more information access the camera with a browser and go to Video Profiles under Video option.
