Difference between revisions of "Reolink"
From ZoneMinder Wiki
Jump to navigationJump to search
Autotravis (talk | contribs) |
Autotravis (talk | contribs) |
||
Line 43: | Line 43: | ||
[https://amzn.to/2J7OrqG https://amzn.to/2J7OrqG] | [https://amzn.to/2J7OrqG https://amzn.to/2J7OrqG] | ||
Source Type: ffmpeg | * Source Type: ffmpeg | ||
Source Path: rtmp://10.0.0.165:1935/bcs/channel0_main.bcs?channel=0&stream=0&user=admin&password=password | * Source Path: rtmp://10.0.0.165:1935/bcs/channel0_main.bcs?channel=0&stream=0&user=admin&password=password | ||
Method: UDP | * Method: UDP |
Revision as of 18:43, 28 October 2020
RLC-410
There is a lengthy forum thread here: https://forums.zoneminder.com/viewtopic.php?f=10&t=25874
RLC-433
Soooo, after lots of reading and just as much trial and error, I came up with this config that seems to work best: Source Type: ffmpeg Source Path: rtmp://10.0.0.165:1935/bcs/channel0_main.bcs?channel=0&stream=0&user=admin&password=password Method: UDP Options: reorder_queue_size=5000,allowed_media_types=video,buffer_size=10000000 Capture Resolution: 640x480 Controllable: yes Control Address: admin:password@10.0.0.165:8000 Auto Stop Timeout: 0.25 The high quality stream is "channel0_main", the low quality on "channnel0_sub". Strangely, the high quality channnel only works when I put the low quality resolution. So instead of 2560x1920 I need to put 640x480. That was a hard thing to find. On the camera the following settings seem to provide the best results in ZM: Clear Stream: Resolution: 2560x1920 Frame Rate: 30 Maximum Bitrate: 6144 H2.64 Profile: Base Fluent Stream: Resolution: 640x480 Frame Rate: 7 Maximum Bitrate: 160 H2.64 Profile: Base
Ref: https://forums.zoneminder.com/viewtopic.php?f=14&t=30078
RLC-520
REOLINK PoE IP Camera Outdoor 5MP
- Source Type: ffmpeg
- Source Path: rtmp://10.0.0.165:1935/bcs/channel0_main.bcs?channel=0&stream=0&user=admin&password=password
- Method: UDP