Difference between revisions of "Brickcom"
From ZoneMinder Wiki
Jump to navigationJump to search
(Created page with " == WCB-100a == Both mjpeg and mpeg4 work as indicated. format mjpeg for the cameras using channel 2 as the source is: http://camera_ip/channel2 Some of them may need the lo...") |
|||
| Line 1: | Line 1: | ||
== WCB-100a == | == WCB-100a == | ||
This camera is 802.11 b/g/n (at least b/g) | |||
It is also wired and the documents indicate is is PPoE | |||
Both mjpeg and mpeg4 work as indicated. | Both mjpeg and mpeg4 work as indicated. | ||
| Line 14: | Line 15: | ||
== WCB-100Ap-0c == | == WCB-100Ap-0c == | ||
This camera is 802.11 a/b/g/n (at least a/b/g) | |||
It is also wired and the documents indicate is is PPoE | |||
I have been using it on the a side | |||
Both mjpeg and mpeg4 work as indicated. | Both mjpeg and mpeg4 work as indicated. | ||
Revision as of 22:26, 6 June 2011
WCB-100a
This camera is 802.11 b/g/n (at least b/g) It is also wired and the documents indicate is is PPoE
Both mjpeg and mpeg4 work as indicated. format mjpeg for the cameras using channel 2 as the source is: http://camera_ip/channel2 Some of them may need the login and password: http://login:pwd@camera_ip/channel2
Format mpeg4 is as follows, this will be on channel 1 rtsp://camera_ip/channel1 I have not needed to use the login to access this stream.
WCB-100Ap-0c
This camera is 802.11 a/b/g/n (at least a/b/g) It is also wired and the documents indicate is is PPoE I have been using it on the a side
Both mjpeg and mpeg4 work as indicated. format mjpeg for the cameras using channel 2 as the source is: http://camera_ip/channel2 All I tested needed the login and password: http://login:pwd@camera_ip/channel2
Format mpeg4 is as follows, this will be on channel 1 rtsp://camera_ip/channel1 I have not needed to use the login to access this stream.
