Difference between revisions of "Brickcom"
From ZoneMinder Wiki
Jump to navigationJump to search
| Line 2: | Line 2: | ||
This camera is 802.11 b/g/n (at least b/g) | This camera is 802.11 b/g/n (at least b/g) | ||
It is also wired and the documents indicate is is PPoE | It is also wired and the documents indicate is is PPoE | ||
Both mjpeg and mpeg4 work as indicated. | |||
format mjpeg for the cameras using channel 2 as the source is: | |||
http://camera_ip/channel2 | |||
Some of them may need the login and password: | |||
http://login:pwd@camera_ip/channel2 | |||
Format mpeg4 is as follows, this will be on channel 1 | Format mpeg4 is as follows, this will be on channel 1 | ||
rtsp://camera_ip/channel1 | rtsp://camera_ip/channel1 | ||
I have not needed to use the login to access this stream. | I have not needed to use the login to access this stream. | ||
== WCB-100Ap-0c == | == WCB-100Ap-0c == | ||
Revision as of 22:35, 6 June 2011
WCB-100a
This camera is 802.11 b/g/n (at least b/g) It is also wired and the documents indicate is is PPoE
Both mjpeg and mpeg4 work as indicated. format mjpeg for the cameras using channel 2 as the source is: http://camera_ip/channel2 Some of them may need the login and password: http://login:pwd@camera_ip/channel2
Format mpeg4 is as follows, this will be on channel 1 rtsp://camera_ip/channel1 I have not needed to use the login to access this stream.
WCB-100Ap-0c
This camera is 802.11 a/b/g/n (at least a/b/g) It is also wired and the documents indicate is is PPoE I have been using it on the a side
Both mjpeg and mpeg4 work as indicated. format mjpeg for the cameras using channel 2 as the source is: http://camera_ip/channel2 All I tested needed the login and password: http://login:pwd@camera_ip/channel2
Format mpeg4 is as follows, this will be on channel 1 rtsp://camera_ip/channel1 I have not needed to use the login to access this stream.
