Difference between revisions of "Brickcom"
From ZoneMinder Wiki
Jump to navigationJump to search
| Line 5: | Line 5: | ||
Both mjpeg and mpeg4 work as indicated. | Both mjpeg and mpeg4 work as indicated. | ||
format mjpeg for the cameras using channel 2 as the source is: | format mjpeg for the cameras using channel 2 as the source is: | ||
'''<nowiki>http://camera_ip/channel2<nowiki>''' | '''<nowiki>http://camera_ip/channel2</nowiki>''' | ||
Some of them may need the login and password: | Some of them may need the login and password: | ||
<nowiki>http://login:pwd@camera_ip/channel2<nowiki> | <nowiki>http://login:pwd@camera_ip/channel2<nowiki> | ||
Revision as of 22:41, 6 June 2011
WCB-100a
This camera is 802.11 b/g/n (at least b/g) It is also wired and the documents indicate is is PPoE
Both mjpeg and mpeg4 work as indicated. format mjpeg for the cameras using channel 2 as the source is: http://camera_ip/channel2 Some of them may need the login and password: http://login:pwd@camera_ip/channel2<nowiki> Format mpeg4 is as follows, this will be on channel 1 rtsp://camera_ip/channel1 I have not needed to use the login to access this stream. == WCB-100Ap-0c == This camera is 802.11 a/b/g/n (at least a/b/g) It is also wired and the documents indicate is is PPoE I have been using it on the a side Both mjpeg and mpeg4 work as indicated. format mjpeg for the cameras using channel 2 as the source is: <nowiki>http://camera_ip/channel2 All I tested needed the login and password: http://login:pwd@camera_ip/channel2
Format mpeg4 is as follows, this will be on channel 1 rtsp://camera_ip/channel1 I have not needed to use the login to access this stream.
