Difference between revisions of "Reolink"
(Created page with "===RLC-410=== There is a lengthy forum thread here: https://forums.zoneminder.com/viewtopic.php?f=10&t=25874") |
|||
| Line 2: | Line 2: | ||
There is a lengthy forum thread here: | There is a lengthy forum thread here: | ||
https://forums.zoneminder.com/viewtopic.php?f=10&t=25874 | https://forums.zoneminder.com/viewtopic.php?f=10&t=25874 | ||
===RLC-433=== | |||
"Soooo, after lots of reading and just as much trial and error, I came up with this config that seems to work best: | |||
Source Type: ffmpeg | |||
Source Path: rtmp://10.0.0.165:1935/bcs/channel0_main.bcs?channel=0&stream=0&user=admin&password=password | |||
Method: UDP | |||
Options: reorder_queue_size=5000,allowed_media_types=video,buffer_size=10000000 | |||
Capture Resolution: 640x480 | |||
Controllable: yes | |||
Control Address: admin:password@10.0.0.165:8000 | |||
Auto Stop Timeout: 0.25 | |||
The high quality stream is "channel0_main", the low quality on "channnel0_sub". Strangely, the high quality channnel only works when I put the low quality resolution. So instead of 2560x1920 I need to put 640x480. That was a hard thing to find. | |||
On the camera the following settings seem to provide the best results in ZM: | |||
Clear Stream: | |||
Resolution: 2560x1920 | |||
Frame Rate: 30 | |||
Maximum Bitrate: 6144 | |||
H2.64 Profile: Base | |||
Fluent Stream: | |||
Resolution: 640x480 | |||
Frame Rate: 7 | |||
Maximum Bitrate: 160 | |||
H2.64 Profile: Base | |||
Ref: https://forums.zoneminder.com/viewtopic.php?f=14&t=30078 | |||
Revision as of 12:27, 24 October 2020
RLC-410
There is a lengthy forum thread here: https://forums.zoneminder.com/viewtopic.php?f=10&t=25874
RLC-433
"Soooo, after lots of reading and just as much trial and error, I came up with this config that seems to work best:
Source Type: ffmpeg Source Path: rtmp://10.0.0.165:1935/bcs/channel0_main.bcs?channel=0&stream=0&user=admin&password=password Method: UDP Options: reorder_queue_size=5000,allowed_media_types=video,buffer_size=10000000 Capture Resolution: 640x480 Controllable: yes Control Address: admin:password@10.0.0.165:8000 Auto Stop Timeout: 0.25
The high quality stream is "channel0_main", the low quality on "channnel0_sub". Strangely, the high quality channnel only works when I put the low quality resolution. So instead of 2560x1920 I need to put 640x480. That was a hard thing to find.
On the camera the following settings seem to provide the best results in ZM:
Clear Stream: Resolution: 2560x1920 Frame Rate: 30 Maximum Bitrate: 6144 H2.64 Profile: Base
Fluent Stream: Resolution: 640x480 Frame Rate: 7 Maximum Bitrate: 160 H2.64 Profile: Base
Ref: https://forums.zoneminder.com/viewtopic.php?f=14&t=30078
