Difference between revisions of "Messoa"
| Line 1: | Line 1: | ||
Messoa NCR870 | Messoa NCR870 | ||
Works with zoneminder v1.25.0 | Works with zoneminder v1.25.0<br> | ||
This company seems fairly new to the IP Camera market, but their optics seem great and they use Linux firmware, <br> | This company seems fairly new to the IP Camera market, but their optics seem great and they use Linux firmware, <br> | ||
hopefully we can expect good thing from them in the future. | hopefully we can expect good thing from them in the future. <br> | ||
The AP_01-00-62-18_MS00 firmware seems a little buggy, I have to input a the setting in the camera a few | The AP_01-00-62-18_MS00 firmware seems a little buggy, I have to input a the setting in the camera a few<br> | ||
times before they stayed. The user management seems disabled also. | times before they stayed. The user management seems disabled also.<br> | ||
ffmpeg h264 stream: | ffmpeg h264 stream: | ||
First navigate to the camera and navigate to the setup, under codec setup the following: | First navigate to the camera and navigate to the setup, under codec setup the following:<br> | ||
Primary Stream --> | Primary Stream --><br> | ||
Codec: H264 | Codec: H264<br> | ||
Res: 720P (1280x720) (this seems to be the limit) | Res: 720P (1280x720) (this seems to be the limit)<br> | ||
Bit rate: your choice | Bit rate: your choice<br> | ||
Frame rate: your choice | Frame rate: your choice<br> | ||
The corresponding Zoneminder Monitor settings are as follows: | The corresponding Zoneminder Monitor settings are as follows: | ||
Source Type: Ffmpeg | Source Type: Ffmpeg<br> | ||
Source Path: rtsp://1xx.xx.xx.xx:8557/h264 | Source Path: rtsp://1xx.xx.xx.xx:8557/h264<br> | ||
Source Colours 24 bit color | Source Colours 24 bit color<br> | ||
Capture Width(pixels): 1280 | Capture Width(pixels): 1280<br> | ||
Capture Height(pixels): 720 | Capture Height(pixels): 720<br> | ||
You can put this in a lower resolution if desired and it work as well. These setting seem to be the highest | You can put this in a lower resolution if desired and it work as well. These setting seem to be the highest<br> | ||
resolution that is supported. | resolution that is supported. | ||
Revision as of 15:49, 21 August 2013
Messoa NCR870
Works with zoneminder v1.25.0
This company seems fairly new to the IP Camera market, but their optics seem great and they use Linux firmware,
hopefully we can expect good thing from them in the future.
The AP_01-00-62-18_MS00 firmware seems a little buggy, I have to input a the setting in the camera a few
times before they stayed. The user management seems disabled also.
ffmpeg h264 stream:
First navigate to the camera and navigate to the setup, under codec setup the following:
Primary Stream -->
Codec: H264
Res: 720P (1280x720) (this seems to be the limit)
Bit rate: your choice
Frame rate: your choice
The corresponding Zoneminder Monitor settings are as follows:
Source Type: Ffmpeg
Source Path: rtsp://1xx.xx.xx.xx:8557/h264
Source Colours 24 bit color
Capture Width(pixels): 1280
Capture Height(pixels): 720
You can put this in a lower resolution if desired and it work as well. These setting seem to be the highest
resolution that is supported.
