Difference between revisions of "GBF PL960PM IP Video Door Phone"

From ZoneMinder Wiki
Jump to navigationJump to search
(Created page with "A random user reports the following from the forums.[https://forums.zoneminder.com/viewtopic.php?f=10&t=26980] ===GBF PL960PM IP Video Door Phone=== In Zoneminder I set up t...")
 
 
Line 15: Line 15:


===Notes===
===Notes===
 
<pre>
On Wed, 7 Feb 2018, GBF Tech Support wrote:
On Wed, 7 Feb 2018, GBF Tech Support wrote:


Line 35: Line 35:


I left the Substream at the WAN default, but changed the Main stream to the LAN default to get the better resolution above.
I left the Substream at the WAN default, but changed the Main stream to the LAN default to get the better resolution above.
</pre>

Latest revision as of 14:19, 19 February 2018

A random user reports the following from the forums.[1]

GBF PL960PM IP Video Door Phone

In Zoneminder I set up the Monitor/Source page as follows:

  • Remote Protocol: RTSP
  • Remote Method: RTP/Unicast
  • Remote Host Name: <local.LAN.IP.address>
  • Remote Host Port: 554
  • Remote Host Path: /cam/realmonitor?
  • Target colorspace: 24 bit Color
  • Capture Width (pixels): 1280
  • Capture Height (pixels):720

Notes

On Wed, 7 Feb 2018, GBF Tech Support wrote:

> Here is the video URL info.
>
> The URL for the video stream is compatible with Dahua brand IP Cameras and uses the following URL format;
>
> For Main Stream:  rtsp://{CAM_ADDR}:{CAM_RTSP_PORT}/cam/realmonitor?
> For Sub Stream:   rtsp://{CAM_ADDR}:{CAM_RTSP_PORT}/cam/realmonitor?subtype=1
>
> Some notes about the video coding;
> 
> - The ControlCam App uses the Substream. The coding for this stream must stay H.264 and cannot be switched to MJPEG as this will disable 
> the video stream through our servers and the App will no longer connect to
> the IP Doorbell.
> - The Video coding settings ideally should be left at WAN defaults (activated when you press the WAN button in the Video Coding settings in the 
> Web Browser interface). Improving the video quality of this stream
> will be detrimental to the smooth communication between the IP Doorbell and your mobile device.

I left the Substream at the WAN default, but changed the Main stream to the LAN default to get the better resolution above.
Retrieved from "https://wiki.zoneminder.com/index.php?title=GBF_PL960PM_IP_Video_Door_Phone&oldid=15093"