SMS Notifications

These instructions are to assist with email or text message setup.

For SMS, You setup email to point to a text gateway. Setup a filter that monitors the cameras for alarms, and when an alarm is set off you have it send an email to the text gateway (or email address). Simple.

You can get images from the alarm embedded in the text (covered in install steps).

The following is used in 1.36 / Debian 10 and newer.

Installation

Follow How to get ssmtp working with Zoneminder.

There are two ways to send emails in options - email. One is sending a short email, and one is designed for longer messages. In the code (as of 1.30 lines 818 and 918), in zmfilter.pl these are correspondingly sub SendEmail and sub SendMessage. They are distinct functions. SSMTP/MSMTP support is in SendEmail but not in SendMessage.

MSMTP Specific Install

Debian 10 and newer should use MSMTP.

apt-get install msmtp msmtp-mta mutt

Testing the email

First test via terminal outside of ZM. Confirm it is working there. Example configurations and calls can be found at: https://wiki.debian.org/msmtp and https://wiki.archlinux.org/index.php/MSMTP (for msmtp).

Once you get a working /etc/msmtprc configuration, try:

echo "hello" | msmtp -a default user@email.com

Watch out for the following:

• Make sure app-armor is disabled for msmtp. The following commands will help: apt install apparmor-utils and then aa-disable /etc/apparmor.d/usr.bin.msmtp

Testing the email in Zoneminder

Then:

1. run a filter in the background (see tips below) or execute.
2. Enable logging on /var/log/zm folder.
3. tail the ZMFilter log and syslog.
4. to initiate an alarm (if alarms are used to test emails), use 'force alarm' on the monitor screen. That is, view a camera, and click force alarm.

You should see SSMTP send an email on the syslog (or try) and the zmfilter log will report the trigger.

Tips

• Free email services may limit how many emails you are allowed to send.

• Always make filters for 1 (or low number) results. If you fail to do this, you could try to send dozens of emails.

• When you make the filter you want the 'current' alarms. You don't want old events. This is accomplished with a Date/Time greater than or equal to -1 minute.

• If when testing the filter execute, the 'execute' button becomes unclickable, uncheck then recheck the email option.

• If you send email as someone other than root you may need to include the user in revaliases.

• test email attachments with one of these:

echo hello | mail -A /dir/to/attachment.log -s "email with file" destination@email.com
mutt -a /dir/to/attachment.log -s "email with file" -- destination@email.com
echo "test" | mutt -d 5 -s "Test Email" user@email.com -a /tmp/file_attachment

• make sure email is checked off in filters.

• service zoneminder restart may be needed after changes (depends upon ZM version)

• test setting off alarms by clicking 'force alarm' in the camera monitor view, then unclick to remove alarm.

• If you find false alerts with motion detection, consider using either ZMES, or passing the event to an object detection based script.

• Always double check the filters are right, AFTER you save them.

• Once an email has been sent for an event, that event is marked and an email for it won't be sent again[1].

• Cron may require setting an environment variable of EMAIL=sendingaddress@email.com in the crontab. When testing this from the shell, you must do the same but with export, e.g. "export EMAIL=sendingaddress@email.com"

Example Filter

See Filters

Send email if only on a certain runstate (Filter on Run States)

Notifications are easy if you want alarms emailed between a static time, for example between 12AM and 6AM. If you have a situation where you may not want the alarms to send you text messages on occasion, you can filter on run states.

Starting from (ZM > 1.30.4) you can set filters based on run states, which means you can change the run state at any desired time (using Cron, or manually), and only if a runstate matches the filter will SMS be sent.

Note that in the author's opinion, run states can become unwieldy for large installations. It's best used with smaller setups only.

Send Email if ZM is Not Running

Here is a minimal script to check that Zoneminder is running. Note that this does not check for mysql errors or hard drive errors (which are possible). Do not put any spaces in the subject or email.

#!/bin/bash


SUBJECT="Name_of_server_ZM"
EMAIL="emailaddress"

/etc/init.d/zoneminder status 2> /dev/null
if test $? -ne 0 ; then
        echo "Detected ZM not running"
        echo "ZM is not running" | mutt -s $SUBJECT $EMAIL
else
        echo "ZM is running, do nothing"
fi

Send email if HDD Fails

#!/bin/bash
# 20 * * * *   root /root/hdderror.sh (this script, and the root assumes you are using /etc/crontab)
# must run as root for access to dmesg in debian
# chmod +x 

LOGFILE=/root/file.log
SUBJECT="e.g._Home_Camera_System_HDD_Error"

echo "" > $LOGFILE

# any text of "error" with regards to sda,sdb, etc that isn't a remount
dmesg | grep -e sda -e sdb -e sdc -e sdd -e sde | grep -i error | grep -v remount >> $LOGFILE
#returns 1 if nothing

if [ $? -eq 0 ]; then
#send email
  echo "HDD Error..." | mutt -s $SUBJECT destination@email.com -a $LOGFILE
  echo "email sent"
else
  echo "do nothing"
fi

Basic ZM Server Monitor

These would go in /etc/crontab

1 0 * * 1 root dmesg | tail -10 > /tmp/hdd_report
2 0 * * 1 root lsblk  >> /tmp/hdd_report
3 0 * * 1 root ls -lt /videos/ >> /tmp/hdd_report
4 0 * * 1 root df -h >> /tmp/hdd_report
5 0 * * 1 root echo "zm server" | mutt -s "zm server" user@email.com -a /tmp/hdd_report

Resources

• Email
• ZM FAQ: How can I get ZM to do different things at different times of day or week
• Instant Notification
• Email Events When Zone Triggered, SMS When Different Zone Triggered
• Event notifications do not work
• How to get ssmtp working with Zoneminder
• [2]
• Receive Email on Runstate change
• [3]
• https://linux.die.net/man/8/logcheck - logcheck / logfile scanner.