Sricam

From ZoneMinder Wiki
Revision as of 21:04, 30 January 2017 by Snake (talk | contribs) (Created page with "'''Sricam AP008''' Older Sricam model. Resolution is 1280x720 upscaled from 640x480. Works as remote camera in Zoneminder with no issues. * Remote Hostname: admin@<ipaddres...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search

Sricam AP008


Older Sricam model. Resolution is 1280x720 upscaled from 640x480. Works as remote camera in Zoneminder with no issues.

  • Remote Hostname: admin@<ipaddress>
  • Remote Host Port: 81
  • Remote Host Path: /videostream.cgi
  • Capture Width: 1280
  • Capture Height: 720

OR the following also works:

  • Remote Hostname: <ipaddress>
  • Remote Host Port: 81
  • Remote Host Path: /videostream.cgi?user=admin&pwd=
  • Capture Width 1280
  • Capture Height 720


Notes on these cameras

These cameras are/were low end and low cost IP cameras. They are dependable in an indoor environment, but have not been tested outdoors. They are no longer actively being sold by the company, but are probably found second hand online.

Limitation: These cameras do NOT work well with POE adaptors (not official POE, but the makeshift adaptors). They can't seem to pull enough energy through the cat5/6 cable. I've tried increasing the voltage of the AC adaptor without luck (up to 14.6 volts with a 15-20 foot cat5 cable). I haven't looked at it deeply. I'm not sure what the limitation is (cheap voltage regulator?). However, they work when the end of the camera cable is connected direct to an AC adaptor.