AirLive AirCam OD325HD

The AirLive AirCam OD-325HD POE camera seems to work fine with these monitor settings:

Getting streams in HTTP

• Source Type: Remote
• Remote Protocol: HTTP
• Remote Method: Simple
• Remote Host Name (example): zoneminder:MYPASSWORD@192.168.1.3
• Remote Host Port: 80
• Remote Host Path: mjpg/video.cgi?0.mjpg
• Target Colorspace: 24 bit color
• Capture Width (pixels): 1280
• Capture Height (pixels): 1024

Getting streams in RTSP

Point your monitor to a ffmpeg source to rtsp://<username>:<password>@<camera-ip>/media.amp?videocodec=<codec>&resolution=<res>&compression=<percent>&fps=<frames>&videokeyframeinterval=<interval>&videobitrate=<rate> to get the stream. There is no need to pass all parameters.

Where:

• codec: h264, mpeg4, mjpeg.
• res: sxga, vga, qvga, qqvga (codec dependent).
• percent: 1 - 100.
• frames: 1 - 30 (resolution dependent).
• interval: 1 - 60.
• rate: 32 - 4096 (resolution dependent).

Examples:

• rtsp://192.168.0.100/media.amp?videocodec=h264&resolution=sxga&compression=100&fps=15&videokeyframeinterval=30&videobitrate=3072
• rtsp://admin:airlive@192.168.0.100/media.amp?videocodec=mpeg4&resolution=vga&fps=30

Notes:

You cannot get all resolution with all codec, for example to get SXGA you have to use H264 or MJPEG. For more information access the camera with a browser and go to Video Profiles under Video option.