EasyN

The following has only been used for the EasyN, Mini Speed Dome, Model No. 1BF, IP Camera and ZM v1.28.0

Configuring the 1BF can be made with a web browser pointed to port 81, for example;

http://192.168.1.126:81/

Initially used a web browser to enable ONVIF on the camera. Then used the application ONVIF Device Manager v2.2.250, to ascertain it was possible to access video feed via;

rtsp://192.168.1.126:554/11

However this required manually entering of a username and password.

It was possible to provide these detail in the ZM 'Remote Host Name' field.

ZM monitor configuration

General tab:

Source Type = Remote
Function = Monitor
Enabled = ticked

Source tab:

Remote Protocol = RTSP
Remote Method = RTP/RTSP
Remote Host Name = user:user@192.168.1.126
Remote Host Port = 554
Remote Host Path = 11
Target Colorspace = 24 bit colour
Capture Width (pixels) = 320
Capture Height (pixels) = 240
Preserve Aspect Ratio = unticked
Orientation = Normal
Deinerlacing = Disabled

Specifications of the EasyN 1BF IP Camera

Device Name: IPCAM
Software Version: V6.4.6.1.1-20140925
Application Version: H3-E-31-A1-TU1
Network connection status: Wireless

If the 1BF is connected to a network with a DHCP server, it will pickup an IP Address on the local network. To work reliably with ZM, it is recommended it be set to a Static IP Address.

Also noticed that when the 1BF is operational, it frequently attempts to contact at least five external IP Addresses. There does not appear to be any reference to the IPs within its user accessible configuration. To this end be wary of allowing to access the Internet.