Foscam FI9831W

Adding support for FI8918W involves the following steps:

• Click on source column of ZM console next to the monitor you want to add PTZ control
• In control Tab, make sure "Controllable" is checked. In control type, select Foscam FI89831W (If it does not exist see later)
• In Control Device please put in:
  • usr=xxx&pwd=yyy where xxx = camera user name and yyy is your password. (NOTE: usr NOT user)
• In Control Address put in IP:port of your camera
• In Auto Stop Timeout put in 1
• Leave track motion unchecked, track delay 0, Return Location none, Return Delay 0

If FI9831W does not exist as a control type

That means your version does not yet have the control protocol. You need to do the following:

• Grab a copy of https://github.com/ZoneMinder/ZoneMinder/blob/master/scripts/ZoneMinder/lib/ZoneMinder/Control/FI9831W.pm and move it to /usr/share/perl5/ZoneMinder/Control/ or wherever your current control scripts reside (An easy way to find it is to look for AxisV2.pm --> an existing control protocol and that's your directory)
• In the control tab of your monitor, click on Edit -> Add New Control
  • Main tab
    • Name: Foscam 9831W
    • Type: FFMPEG
    • Protocol:FI9831W
    • Can Reset:yes, rest no

• • Move tab
    • Can Move: Yes
    • Can Move Diagonally: Yes
    • Can Move Continuous: Yes
    • Rest no

• • Pan Tab
    • Can Pan: Yes
    • Min Pan Range: 0
    • Max Pan Range: 360
    • Min Pan Step: 0
    • Max Pan Step: 360
    • Has Pan Speed: Yes
    • Min Pan Speed: 0
    • Max Pan Speed: 4

• • Tilt Tab
    • Can Tilt: Yes
    • Min Tilt Range: 0
    • Max Tilt Range: 90
    • Min Tilt Step: 0
    • Max Tilt Step: 90
    • Has Tilt Speed: Yes
    • Min Tilt Speed: 0
    • Max Tilt Speed: 4

• • Presets Tab
    • Has Presents: Yes
    • Num Presets:8
    • Can Set Presets: Yes