|
|
| (15 intermediate revisions by 2 users not shown) |
| Line 1: |
Line 1: |
| The intent of this walk through is to install a very base/bare bones installation of CentOS that runs only ZoneMinder. This would be for a dedicated ZoneMinder server with no GUI or any unnecessary services running. The reason for the very light-weight installation is to make the majority of system resources available to ZoneMinder, not the OS. With this installation, memory is reduced to around 140-160MB, and CPU usage is practically nonexistent. The CentOS base installation is very easy to install and doesn’t take too much time as long as you have some type of broadband connection. There are many ways to install CentOS, but this article covers only two, because they are related.
| | === Installation Instructions === |
| | To install ZoneMinder on RHEL, CentOS, and compatible clones, please refer to the instructions shown on our readthedocs site. |
| | [https://zoneminder.readthedocs.io/en/latest/installationguide/redhat.html Redhat - ZoneMinder Documentation] |
|
| |
|
| ''All CLI operations/commands in this How-To are done as root, in the /root directory. The reasoning is that this system would be in a secure environment to begin with. However, if you need to add a user to run these services to better secure the system, then you can, but keep in mind that some items must run as root.''
| | ==== Archived Installation Instructions ==== |
| | | What follows is a link to old installation instructions which predate rpm installations from zmrepo or rpmfusion. They are kept solely for reference. |
| == Zmrepo - A ZoneMinder repository for RPM based distros == | | [[CentOS/Archived]] |
| I'd like to introduce you to a new, easier way to install ZoneMinder on CentOS. Zmrepo is meant to be a turn-key solution. There is no compiling, no installing modules from CPAN, and no more complicated repository instructions.
| |
| | |
| This repository brings together a ZoneMinder rpm built by the development team, with all features enabled. It also includes all dependencies that are not found in the default CentOS repositories. A few Perl modules are built by us, but all the rest of the dependencies are mirrored from popular sites such as EPEL and RPMFusion. There is no longer a need to add these additional repositories to your system. Zmrepo takes care of that for you.
| |
| | |
| Lastly, only CentOS 6 is supported at the moment. This repo will '''not''' work with CentOS 7.
| |
| UPDATE: I have begun work on CentOS 7 support.
| |
| | |
| * Installation Instructions for i386 or x86_64 architectures:
| |
| wget http://zmrepo.connortechnology.com/el/6/i386/zmrepo-6-4.el6.noarch.rpm
| |
| sudo yum install --nogpgcheck zmrepo-6-4.el6.noarch.rpm
| |
| sudo yum install zoneminder
| |
| less /usr/share/doc/zoneminder-*/README.CentOS
| |
| | |
| You must complete the steps documented in README.CentOS before ZoneMinder will function correctly.
| |
| | |
| NOTE: RHEL users must enable the "rhel-6-server-optional-rpms" repositoy on their system before attempting to install ZoneMinder.
| |
| | |
| A YouTube video that steps through the installation can be viewed [https://www.youtube.com/watch?v=l2lLvl8WxfU here.]
| |
| | |
| == CentOS 5.6 & ZoneMinder 1.25.0 == | |
| This guide is for CentOS v5.6 (<b>Notes for using this guide with CentOS 6 are in chapter 2.</b>) with ZoneMinder v1.25.0 which are the newest released versions as of this update (Summer 2011). If you are attempting to install newer versions of either using this guide, you will have to adjust file and directory names denoted below.
| |
| | |
| === Step One - Get CentOS ===
| |
| You can download the “.iso” file(s) for CentOS from http://www.centos.org/<br/>
| |
| Alternatively download the net-install version of CentOS which is basically just the first CD.
| |
| Here is one location to download the net-install version:<br/>
| |
| Download i386: http://mirror.symnds.com/distributions/CentOS-vault/5.6/isos/i386/CentOS-5.6-i386-netinstall.iso<br/>
| |
| Download 64 bit: http://mirror.symnds.com/distributions/CentOS-vault/5.6/isos/x86_64/CentOS-5.6-x86_64-netinstall.iso<br/>
| |
| Mirrors List: http://mirror.centos.org/centos/5/isos/
| |
| | |
| === Step Two - Installation Source ===
| |
| Regardless of which method you use, the next few steps are the same.<br/>
| |
| Begin by booting your system up with either cd/dvd.<br/>
| |
| Choose the options that best fit your environment until you reach the “Installation Method”.
| |
| | |
| [[Image:centosnetinstal-http.png]]
| |
| | |
| Choose '''HTTP''' ONLY if you are using the net-install method. Otherwise, you probably want to choose '''Local CDROM'''. <br/>
| |
| | |
| If you are using the net-install method then enter:<br/>
| |
| Website Name: '''mirror.centos.org'''<br/>
| |
| CentOS Directory: (for i386) '''/centos/5.6/os/i386'''<br/>
| |
| CentOS Directory: (for 64 bit) '''/centos/5.6/os/x86_64'''
| |
| | |
| === Step Three - Installation Packages ===
| |
| On the first screen, un-check "Desktop - Gnome" then check "Server" (not Server-GUI)<br/>
| |
| Make sure that you have "Customize now" selected at the bottom. (do not check "Packages from CentOS Extras")
| |
| | |
| [[Image:centosinstall-packages1.png]]
| |
| | |
| Click "Next" to continue<br/>
| |
| | |
| Once presented with the custom package selection, un-check/check the following:
| |
| Applications = Check only "Editors" and "Text Based Internet"
| |
| Development = Check only "Development Libraries" and "Development Tools"
| |
| Servers = Un-check everything
| |
| Base System = Check only "Base" (you can check Administration Tools and System Tools if you need them, but they are not necessary)
| |
| | |
| [[Image:Centosinstall-packages2.png]]
| |
| | |
| Now let the system finish the installation.
| |
| | |
| [[Image:centosisntall-end.png]]
| |
| | |
| === Step Four - Configuration ===
| |
| After the first reboot, the setup screen should appear. If not, log into the system and type "setup"
| |
| | |
| [[Image:centosinstall-setup1.png]]
| |
| | |
| Select "Firewall Configuration" and set the "Security Level" and "SELinux" to "Disabled."
| |
| | |
| [[Image:centosinstall-setup2.png]]
| |
| | |
| Next, we are going to disable a number of system services. Go back to the setup screen and select "System Services"<br/>
| |
| Un-Check:
| |
| apmd
| |
| bluetooth
| |
| cups
| |
| hidd
| |
| ip6tables
| |
| iptables
| |
| netfs
| |
| nfslock
| |
| pcscd
| |
| portmap
| |
| After disabling the services, select "Disable Now and On Boot", exit the setup tool, and log into the system if you haven't already.
| |
| *Screen is a simple program that allows you to run commands from a "Hosted" command line interface. This helps if you loose your connection to the server for any reason in that it enables you to resume (screen -r) right where you left off. Often times, I will start a large update/upgrade, leave it for the day, then come back and see where it's at later. Screen allows you to do that without having to be connected.
| |
| *Install Screen
| |
| yum install screen
| |
| *To start a screen session just type
| |
| screen
| |
| *If you get disconnected and need to resume your session of screen simply type
| |
| screen -r
| |
| | |
| === Step Five - Installing ZoneMinder 1.25.0 ===
| |
| First, we need to download files and prepare the system
| |
| *Add the RPM Forge repository to CentOS. This will allow the installation of a number of services/applications later without having to manually install them.
| |
| <pre># For i386 CentOS 5.x run:
| |
| rpm -Uhv http://apt.sw.be/redhat/el5/en/i386/rpmforge/RPMS/rpmforge-release-0.3.6-1.el5.rf.i386.rpm | |
| | |
| # For 64 bit CentOS 5.x run:
| |
| rpm -Uhv http://apt.sw.be/redhat/el5/en/x86_64/rpmforge/RPMS/rpmforge-release-0.3.6-1.el5.rf.x86_64.rpm</pre>
| |
| *Download the needed files, ZoneMinder 1.25.0 and the Cambozola addon
| |
| wget http://www2.zoneminder.com/downloads/ZoneMinder-1.25.0.tar.gz
| |
| wget http://www.zoneminder.com/sites/zoneminder.com/downloads/cambozola.jar
| |
| *Now let's install all the services and programs that will be needed (''If you encounter any dependency errors using yum, try running '''yum clean all''' then re-try the install command(s).'')
| |
| | |
| *tip: Copy/paste two lines at a time
| |
| | |
| <pre>
| |
| yum -y install mysql mysql-server mysql-devel php php-gd php-mysql httpd gcc \
| |
| pcre-devel gd mod_ssl glib2-devel gcc-c++ ntp gnutls-devel ImageMagick
| |
| | |
| yum -y install libjpeg-devel perl-Archive-Tar perl-MIME-Lite perl-MIME-tools \
| |
| perl-Date-Manip perl-LWP-UserAgent-Determined
| |
| | |
| yum -y install perl-PHP-Serialization perl-Device-SerialPort perl-Archive-Zip perl-Sys-Mmap \
| |
| perl-Module-Load subversion git yasm bzip2 bzip2-devel bzip2-libs lbzip2</pre>
| |
| *Now let's update everything within the new CentOS install
| |
| yum -y update
| |
| *At this point, it might be useful to reboot your system. Oddly, sometimes things don't work right unless you reboot after all the updates
| |
| reboot -or- shutdown -r now
| |
| *After rebooting, log into your system
| |
| ==== Install ffmpeg ====
| |
| *Now we need to make sure we use the latest "tested" version of "ffmpeg". This is the latest version of ffmpeg that the ZoneMinder developers have tested with. Download, compile and install ffmpeg:
| |
| <pre>git clone git://git.videolan.org/ffmpeg.git
| |
| cd ffmpeg
| |
| ./configure --enable-gpl --enable-shared --enable-pthreads
| |
| make
| |
| </pre>
| |
| | |
| *The following commands must be done as '''root'''
| |
| | |
| <pre>
| |
| make install
| |
| make install-libs
| |
| </pre>
| |
| edit /etc/ld.so.conf and add the line "/usr/local/lib"
| |
| <pre>
| |
| ldconfig -v
| |
| </pre>
| |
| | |
| *Next, run 'ffmpeg' from the command line. Make sure you do not get any errors:
| |
| | |
| <pre>
| |
| ffmpeg
| |
| </pre>
| |
| | |
| *If 'ffmpeg' runs correctly, you'll see something similar to this:
| |
| | |
| <pre>
| |
| ffmpeg version N-32260-gaebb56e, Copyright (c) 2000-2011 the FFmpeg developers
| |
| built on Aug 31 2011 21:41:49 with gcc 4.1.2 20080704 (Red Hat 4.1.2-50)
| |
| configuration: --enable-shared --enable-swscale --enable-gpl --enable-pthreads
| |
| libavutil 51. 14. 0 / 51. 14. 0
| |
| libavcodec 53. 12. 0 / 53. 12. 0
| |
| libavformat 53. 10. 0 / 53. 10. 0
| |
| libavdevice 53. 3. 0 / 53. 3. 0
| |
| libavfilter 2. 37. 0 / 2. 37. 0
| |
| libswscale 2. 0. 0 / 2. 0. 0
| |
| libpostproc 51. 2. 0 / 51. 2. 0
| |
| Hyper fast Audio and Video encoder
| |
| usage: ffmpeg [options] [[infile options] -i infile]... {[outfile options] outfile}...
| |
| | |
| Use -h to get full help or, even better, run 'man ffmpeg'
| |
| </pre>
| |
| | |
| ==== Enable services ====
| |
| *Turn everything on. These commands must be run as root.
| |
| | |
| <pre>
| |
| chkconfig httpd on
| |
| chkconfig mysqld on
| |
| chkconfig ntpd on
| |
| service httpd start
| |
| service mysqld start
| |
| service ntpd start
| |
| </pre>
| |
| ==== Install Zoneminder ====
| |
| *Next, we need to extract the contents of the ZoneMinder "tar" file, then jump into its directory.
| |
| <pre>
| |
| cd /root/ # Or your work directory for this installation
| |
| tar -zxvf ZoneMinder-1.25.0.tar.gz
| |
| cd ZoneMinder-1.25.0
| |
| </pre>
| |
| *Now we are going to configure ZoneMinder with some additional parameters. What is listed are the default CentOS directory locations.
| |
| ./configure --with-webdir=/var/www/html/zm --with-cgidir=/var/www/cgi-bin
| |
| | |
| Note: It seems for Zoneminder to build with newer versions of ffmpeg, (certainly 0.6.3) you'll need to append CPPFLAGS="-D__STDC_CONSTANT_MACROS" to the end of the
| |
| ./configure line thus:
| |
| | |
| ./configure --with-webdir=/var/www/html/zm --with-cgidir=/var/www/cgi-bin --with-ffmpeg=/usr/local/share/ffmpeg CPPFLAGS="-D__STDC_CONSTANT_MACROS"
| |
| | |
| There is a section in the FAQ ''"When running configure, I get a lot of messages about not being able to compile the ffmpeg libraries"'' about this [[http://www.zoneminder.com/wiki/index.php/FAQ]].
| |
| | |
| Worth mentioning here is the section in the FAQ under the heading "''My load is too high, how can I reduce it?''" [[http://www.zoneminder.com/wiki/index.php/FAQ]]. This descibes how you can possibly reduce CPU load by half by
| |
| changing the system's jpeg libraries and building Zoneminder with processor specific instructions.
| |
| Since CentOS 6.4 CentOS now comes with libjpeg_turbo as the standard JPEG library leading to a more optimised Zoneminder.
| |
| | |
| | |
| By default ZM_DB_HOST=localhost, ZM_DB_NAME=zm, ZM_DB_USER=zmuser, and ZM_DB_PASS=zmpass.
| |
| *Change "zmuser" (if you want) with the user that you will use within MySQL to access the ZoneMinder database
| |
| *Change "zmpass" with the password you will be using with the "zmuser" account
| |
| So if you wish to change it, use a command like:
| |
| ./configure --with-webdir=/var/www/html/zm --with-cgidir=/var/www/cgi-bin --with-webuser=apache --with-webgroup=apache ZM_DB_HOST=localhost ZM_DB_NAME=zm ZM_DB_USER=zmuser ZM_DB_PASS=zmpass
| |
| | |
| *if you get the configure "error zm requires libmysqlclient.a" with 64 bit CentOS add the following to the end of your configure statement
| |
| --with-extralibs="-L/usr/lib64 -L/usr/lib64/mysql"
| |
| | |
| e.g. For CentOS 5.6 64-bit with support for ffmpeg. The whole command must be executed on one line. Make sure to change the '''zmpass''' to a password that matches your installation.
| |
| <pre>
| |
| ./configure --with-webdir=/var/www/html/zm --with-cgidir=/var/www/cgi-bin --with-ffmpeg=/usr/local/share/ffmpeg --with-webuser=apache --with-webgroup=apache ZM_DB_HOST=localhost ZM_DB_NAME=zm ZM_DB_USER=zmuser ZM_DB_PASS=zmpass --with-extralibs="-L/usr/lib64 -L/usr/lib64/mysql" CXXFLAGS="-D__STDC_CONSTANT_MACROS"
| |
| </pre>
| |
| * Run '''make''' and '''make install''' after running the configuration steps above.
| |
| | |
| make
| |
| # Run the next command as root
| |
| make install
| |
| | |
| ==== Configure MySQL ====
| |
| *Need to add a password for the root user of MySQL
| |
| *Create the zm database
| |
| *Create the zm database user with permissions and password
| |
| mysql
| |
| mysql> SET PASSWORD FOR root@localhost=PASSWORD('new_root_password');
| |
| >Query OK, 0 rows affected (0.00 sec)
| |
| mysql> create database zm;
| |
| >Query OK, 1 row affected (0.01 sec)
| |
| mysql> CREATE USER 'your_zm_user'@'localhost' IDENTIFIED BY 'your_zm_password_from_above';
| |
| Query OK, 0 rows affected (0.01 sec)
| |
| mysql> grant CREATE, INSERT, SELECT, DELETE, UPDATE on zm.* to your_zm_user@localhost;
| |
| >Query OK, 0 rows affected (0.02 sec)
| |
| mysql> exit
| |
| >Bye
| |
| *Import the tables into the zm database
| |
| cd /root/ZoneMinder-1.25.0
| |
| mysql -u root -p zm < db/zm_create.sql
| |
| | |
| ==== Finalize Installation of ZoneMinder ====
| |
| '''All remaining CLI commands need to be run as root.'''
| |
| *Make ZoneMinder startup automatically after a reboot
| |
| # from the ZoneMinder-1.25 source directory
| |
| cp scripts/zm /etc/init.d/
| |
| chmod +x /etc/init.d/zm
| |
| chkconfig zm on
| |
| *Add the Cambozola Java web interface
| |
| cp cambozola.jar /var/www/html/zm/
| |
| *Make sure you have permission to view it from apache:
| |
| chown apache:apache /var/www/html/zm/cambozola.jar
| |
| *Start ZoneMinder
| |
| service zm start
| |
| | |
| Note: You may get an error when you try to start Zoneminder using the 'zm' startup script as per this forum post: [[http://www.zoneminder.com/forums/viewtopic.php?f=21&t=17827]] .
| |
| The reason for this was the default 'zm' startup script was formatted with DOS line endings. If you get the errors as detailed in the above post then the fix is to convert the
| |
| 'zm' file to use UNIX style line endings. You can do this in the Vim text editor whilst editing the 'zm' file thus: ':set fileformat=unix' then save the file ':wq'. You can also
| |
| use the utility dos2unix to convert the file.
| |
|
| |
| | |
| * tick the box for support for the Cambozola addon within your ZoneMinder installation: http://ip-address/zm (Options->Images tab->OPT_CAMBOZOLA)
| |
| | |
| | |
| Now have fun and add your cameras to ZoneMinder knowing you now have a very stable and streamlined OS to run it on.
| |
| | |
| == CentOS 6 Notes ==
| |
| | |
| The installation for CentOS 6 is pretty much the same.
| |
| Download CentOS 6 minimal installation ISO (CentOS-6.0-i386-minimal.iso – 257MB). Burn to CD and install. We only want to be running in console text mode not GUI graphics mode. During installation configure network and tick to enable network adapter.
| |
| * Login as root and update the base install:
| |
| <pre>yum -y update</pre>
| |
| * Install required packages, other useful packages, and their dependencies
| |
| <pre>
| |
| yum groupinstall core
| |
| yum groupinstall base
| |
| yum install gcc gcc-c++ wget bison mysql-devel mysql-server php php-mysql php-pear php-pear-DB php-mbstring \
| |
| nano tftp-server httpd make ncurses-devel libtermcap-devel sendmail sendmail-cf caching-nameserver \
| |
| sox newt-devel libxml2-devel libtiff-devel php-gd audiofile-devel gtk2-devel subversion nano kernel-devel \
| |
| bison-devel ncurses zlib zlib-devel openssl openssl-devel gnutls-devel php-process perl-Time-HiRes
| |
| </pre>
| |
| | |
| Suggestion:
| |
| To remove various configure/make errors in Centos 6.2, you may also want to install:<pre>
| |
| bzip2-libs ffmpeg-devel ffmpeg-php perl-Net-SFTP-Foreign perl-Expect perl-LWPx-ParanoidAgent.x86_64</pre>
| |
| | |
| Now we continue from step four (4).
| |
| ==== Installation of ZoneMinder ====
| |
| * In step five (5) the correct RPM Forge repository is:
| |
| <pre># For i686 CentOS 6.x run:
| |
| rpm -Uhv http://apt.sw.be/redhat/el6/en/i386/rpmforge/RPMS/rpmforge-release-0.5.2-2.el6.rf.i686.rpm
| |
| | |
| # For 64 bit CentOS 6.x run:
| |
| rpm -Uhv http://apt.sw.be/redhat/el6/en/x86_64/rpmforge/RPMS/rpmforge-release-0.5.2-2.el6.rf.x86_64.rpm</pre>
| |
| | |
| * In step five (5) the command that seems to configure zoneminder correctly is:
| |
| <pre>
| |
| CXXFLAGS=-D__STDC_CONSTANT_MACROS ./configure --with-webdir=/var/www/html/zm \
| |
| --with-cgidir=/var/www/cgi-bin --with-webuser=apache --with-webgroup=apache \
| |
| ZM_DB_HOST=localhost ZM_DB_NAME=zm ZM_DB_USER=your_zm_user ZM_DB_PASS=your_zm_password ZM_SSL_LIB=openssl
| |
| </pre>
| |
| | |
| Suggestion:
| |
| For Centos 6.2, I used the following configure string for success:<pre>
| |
| ./configure --with-webdir=/var/www/html/zm --with-cgidir=/var/www/cgi-bin --with-webuser=apache --with-webgroup=apache ZM_DB_HOST=localhost ZM_DB_NAME=zm ZM_DB_USER=<zm user> ZM_DB_PASS=<zm user passwd> ZM_SSL_LIB=openssl --with-extralibs="-L/usr/lib64 -L/usr/lib64/mysql" --with-ffmpeg=/usr/share/ffmpeg CXXFLAGS="-D__STDC_CONSTANT_MACROS" </pre>
| |
| | |
| ==== Troubleshooting FFmpeg Errors Building ZoneMinder ====
| |
| Using the git version of FFmpeg can cause the ZoneMinder make process to fail with unresolved symbols in ffmpeg. To remedy this, use version 0.6.5 of FFmpeg with the same configure instructions as the normal install above.
| |
| FFmpeg 0.6.5: http://ffmpeg.org/releases/ffmpeg-0.6.5.tar.bz2
| |
| ==== Troubleshooting Blank Page ====
| |
| If everything went ok but when accessing zoneminder's web page at http://localhost/zm, the page is blank this means that there is a problem with PHP short tags. Edit setting short_open_tag in php.ini (/etc/php.ini) and change it to On.
| |
| * Restart apache server with:
| |
| <pre>service httpd restart</pre> and you should be up and running.
| |
| ==== Trouble shooting full drive with CentOS 6 ====
| |
| The default drive structure has chaned from that of CentOS 5 having the full drive allocated to the /root partition. CentOS 6 by default makes a logical volume 'LVM' of 10% your drives space for the /root partition and the remaining drive as the /home partion with the exception of the swap and boot partitions.
| |
| | |
| The will cause Zoneminder to fill the /root partition as the /var/www/html/zm/events directory is by default located here, you can use the system-config-lvm utility to re-adjust this partition balance if your system has been installed with the default partition structure.
| |
| | |
| It is best to install CentOS 6 with a custom partition layout that is the same as CentOS 5 structure, you can also if using a single physical had drive do with out the LVM drives and create an EXT4 /root partion along with the standard /boot and /swap partitions.
| |
| | |
| ----
| |
| | |
| [[== '''P.S.''' ==]] aspcicc@jumpy.it
| |
| (Update: This does not appear to be required any more.)
| |
| | |
| Hi! and thanks for your guide.. i want to add a little correction that have made me crazy to resolve, when I poweroff or reboot system i obtain an error related to mysql database and i have understood that the problem was because mysqld is stopped before zoneminder to be more specific there isn't a link under rc0.d (halt) and rc6.d (reboot) to zoneminder that for this lack is simply killed by killall. To resolve this problem you need to add at the start of zm (under /etc/init.d) the line
| |
| | |
| ' # chkconfig: 345 99 01 ' (without ' of course)
| |
| | |
| and then run
| |
| chkconfig --level 345 zm on
| |
| chkconfig --level 06 zm off
| |
| | |
| So the link to shutdown zm is created under rc0.d and rc6.d and zoneminder is started at the end of poweron and stopped at the beginning of the poweroff
| |
| | |
| For information about priority starting and stopping processes see: http://www.netadmintools.com/art94.html
| |
| | |
| | |
| ----
| |
| | |
| Added Dependency: ImageMagick
| |
| | |
| Removed Dependency: perl-Time-HiRes, which causes a conflict with the default perl package.
| |
| | |
| Also, mysql seems to install with no password for the root user, and the zm DB create script creates the database on the fly, which means that the database create command needs to have the "-p zm" removed from the command line.
| |
| | |
| Could someone verify that this is correct, to make sure it's not just something I missed?
| |
| | |
| Thanks!
| |
| terry@cnysupport.com
| |
| | |
| ----
| |
| Struggling to get x264 and ffmpeg working? I used the latest SVN versions not the Centos packages. But I was getting
| |
| | |
| ''ffmpeg: error while loading shared libraries: libavdevice.so.53: cannot open shared object file: No such file or directory''
| |
| | |
| I followed these instructions:
| |
| | |
| <pre>cd /etc/ld.so.conf.d</pre>
| |
| | |
| * add another file: custom-libs.conf
| |
| * inside, put :
| |
| | |
| <pre>/usr/local/lib</pre>
| |
| | |
| * save the file
| |
| * run ldconfig
| |
| <pre>ldconfig</pre>
| |
| | |
| BeeryGaz
| |
| | |
| ----
| |
| | |
| ==== Failed monitors or ZM refusing to start ====
| |
| A problem that took me some time to figure out on two installations was SElinux.
| |
| SElinux stops Zoneminder from accessing some system parts or doing some functions so will cause various errors or simply drive you nuts trying to figure out.
| |
| | |
| Look at the following page on how to disable SElinux or use permissive mode.
| |
| | |
| <pre>http://www.centos.org/docs/5/html/5.2/Deployment_Guide/sec-sel-enable-disable.html</pre>
| |
| | |
| Some of the errors that I was getting with a fresh install on CentOS 6 was
| |
| <pre>
| |
| 2013-02-16 16:13:10.828590 zmwatch 14898 ERR Can't open memory map file '/dev/shm/zm.mmap.1': No such file or directory zmwatch.pl
| |
| 2013-02-16 16:13:10.736988 zmfix 15317 ERR Can't stat /dev/video0: Permission denied zmfix.cpp
| |
| </pre>
| |
| | |
| ----
| |
| == ZoneMinder 1.26.x ==
| |
| | |
| Zoneminder after a long period of none development is now being developed by the community, these notes are to try and help with the installation of the new release on CentOS 5 and CentOS 6.
| |
| All testing has been done on a CentOS 6.4 fresh install server.
| |
| | |
| === Cmake installation notes ===
| |
| | |
| Compiling of Zoneminder can now be done with the 'Cmake' command in replacement of the ./configure command this should automatically configure the build with the minimum of parameters. The 'Cmake' command at time of writing produced a partially working installation with the main files installed into /usr/local/bin/zoneminder and associated folders, different from the above guides.
| |
| | |
| The webfiles require to be linked via a zoneminder.conf file located with in the /disto/redhat directory inside the build directory that requires to be coped to the /etc/httpd/conf.d directory, this will need to be edited to the correct location of the webfiles and remove the local only command as indicated with in the file.
| |
| | |
| The Cmake install failed to use my BTTV capture card producing various errors with a potential solution given here <pre>http://www.zoneminder.com/forums/viewtopic.php?f=30&t=21709</pre>
| |
| | |
| === ./configure compile ===
| |
| | |
| To install via the traditional ./configure method you first need to run the ./bootstrap.sh file to generate the required configure file, the install can then progress as the above installation guides.
| |
| | |
| This method has produced a fully working installation at time of writing.
| |
| | |
| == pt_BR Instructions ==
| |
| | |
| Here is a good walkthrough install of zoneminder in CentOS using the rpm package method. It is intended to Portuguese (pt or pt_BR) audience.
| |
| | |
| <pre>http://dulimind.blogspot.com.br/2013/12/zoneminder-no-centos-6.html</pre>
| |
| ----
| |
| | |
| [[Categories: Linux distributions]]
| |
