Difference between revisions of "EasyN"
| Line 39: | Line 39: | ||
Orientation = Normal | Orientation = Normal | ||
Deinerlacing = Disabled | Deinerlacing = Disabled | ||
Specifications of the EasyN 1BF IP Camera | |||
Device Name: IPCAM | |||
Software Version: V6.4.6.1.1-20140925 | |||
Application Version: H3-E-31-A1-TU1 | |||
Network connection status: Wireless | |||
If the 1BF is connected to a network with a DHCP server, it will pickup an IP Address on the local network. To work reliably with ZM, it is recommended to set a Static IP Address. | |||
Also noticed that when the 1BF is operational, it frequently attempts to contact at least five external IP Address. There does not appear to be any reference to the IPs within its user accessible configuration. To this end be wary of allowing to access the Internet. | |||
Revision as of 03:53, 11 January 2015
The following has only been used for the EasyN, Mini Speed Dome, Model No. 1BF, IP Camera and ZM v1.28.0
Configuring the 1BF can be made with a web browser pointed to port 81, for example;
http://192.168.1.126:81/
Initially used a web browser to enable ONVIF on the camera. Then used the application ONVIF Device Manager v2.2.250, to ascertain it was possible to access video feed via;
rtsp://192.168.1.126:554/11
However this required manually entering of a username and password.
It was possible to provide these detail in the ZM 'Remote Host Name' field.
ZM monitor configuration
General tab:
Source Type = Remote Function = Monitor Enabled = ticked
Source tab:
Remote Protocol = RTSP Remote Method = RTP/RTSP Remote Host Name = user:user@192.168.1.126 Remote Host Port = 554 Remote Host Path = 11 Target Colorspace = 24 bit colour Capture Width (pixels) = 320 Capture Height (pixels) = 240 Preserve Aspect Ratio = unticked Orientation = Normal Deinerlacing = Disabled
Specifications of the EasyN 1BF IP Camera
Device Name: IPCAM Software Version: V6.4.6.1.1-20140925 Application Version: H3-E-31-A1-TU1 Network connection status: Wireless
If the 1BF is connected to a network with a DHCP server, it will pickup an IP Address on the local network. To work reliably with ZM, it is recommended to set a Static IP Address.
Also noticed that when the 1BF is operational, it frequently attempts to contact at least five external IP Address. There does not appear to be any reference to the IPs within its user accessible configuration. To this end be wary of allowing to access the Internet.
