Messoa

From ZoneMinder Wiki
Revision as of 16:48, 21 August 2013 by Ginjer (talk | contribs) (Created page with "Messoa NCR870 Works with zoneminder v1.25.0 This company seems fairly new to the IP Camera market, but their optics seem great and they use Linux firmware, hopefully we can ...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search

Messoa NCR870

Works with zoneminder v1.25.0 This company seems fairly new to the IP Camera market, but their optics seem great and they use Linux firmware, hopefully we can expect good thing from them in the future. The AP_01-00-62-18_MS00 firmware seems a little buggy, I have to input a the setting in the camera a few times before they stayed. The user management seems disabled also.

ffmpeg h264 stream:

First navigate to the camera and navigate to the setup, under codec setup the following: Primary Stream --> Codec: H264 Res: 720P (1280x720) (this seems to be the limit) Bit rate: your choice Frame rate: your choice

The corresponding Zoneminder Monitor settings are as follows:

Source Type: Ffmpeg Source Path: rtsp://1xx.xx.xx.xx:8557/h264 Source Colours 24 bit color Capture Width(pixels): 1280 Capture Height(pixels): 720

You can put this in a lower resolution if desired and it work as well. These setting seem to be the highest resolution that is supported.

Retrieved from "https://wiki.zoneminder.com/index.php?title=Messoa&oldid=5807"