Messoa

Messoa NCR870

Works with zoneminder v1.25.0

This company seems fairly new to the IP Camera market, but their optics seem great and they use Linux firmware,
hopefully we can expect good thing from them in the future.
The AP_01-00-62-18_MS00 firmware seems a little buggy, I had to input the setting in the camera a few
times before they stayed. The user management seems disabled also.

ffmpeg h264 stream:

First navigate to the camera, choose setup, under Image and Codec setup the following:
Primary Stream -->
Codec: H264
Res: 720P (1280x720) (this seems to be the limit)
Bit rate: your choice
Frame rate: your choice

The corresponding Zoneminder Monitor settings are as follows:

Source Type: Ffmpeg
Source Path: rtsp://xx.xx.xx.xx:8557/h264
Source Colours 24 bit color
Capture Width(pixels): 1280
Capture Height(pixels): 720

You can put this in a lower resolution if desired and it work as well. These setting seem to be the highest
resolution that is supported.