Difference between revisions of "X-vision"
(Updated page with info about X720B) |
(Add xvision working camera settings for XC1080BAP XC1080VP) |
||
| Line 21: | Line 21: | ||
No combination of the settings and credentials work in Zoneminder. | No combination of the settings and credentials work in Zoneminder. | ||
---- | |||
I eventually got working: XC1080BAP (bullet) XC1080VP (dome) using these settings on zoneminder V1.30.4 | |||
Source Type: FFMPEG | |||
Source tab - | |||
Source Path: rtsp://user:password@<ipaddress>/ch01.264 | |||
remote: TCP, | |||
no options, | |||
colourspace: 24 bit colour, | |||
capture width: 1920 | |||
capture height: 1080, | |||
orientation: normal, | |||
deinterlacing: disabled | |||
Revision as of 07:45, 8 July 2017
http://www.x-vision.co.uk/ had some cameras wich we bought and they tested fine with ZM.
We tested the X104S (you cant use the pan and tilt from ZM) and the X100T.
Both setups exactly the same. Just choose ffmpeg as the source type and the source path is something like:
rtsp://172.16.10.44/mpeg4/media.amp?resolution=640x480
Works fine.
Pete
X720B is not compatible.
The X720B requires credentials to connect. Connecting via VLC works with the following path:
rtsp://<username>:<password>@<ipaddress>
No combination of the settings and credentials work in Zoneminder.
I eventually got working: XC1080BAP (bullet) XC1080VP (dome) using these settings on zoneminder V1.30.4 Source Type: FFMPEG Source tab - Source Path: rtsp://user:password@<ipaddress>/ch01.264 remote: TCP, no options, colourspace: 24 bit colour, capture width: 1920 capture height: 1080, orientation: normal, deinterlacing: disabled
