Search results

**Source Path: rtsp://admin:admin@##.##.##.##:8554/CH001.sdp?tcp (or whatever your username/password is.) **Remote Host Path: /PictureCatch.cgi?username=admin&password=admin&channel=1 (or whatever your username/password is)

Source Path: rtsp://admin:admin@<Camera-IP>:554/12 (See Note)

*rtsp://your_ip_address:554/user=admin&password=&channel1&stream=0.sdp *Default login: admin

:rtsp://admin:[PASSWORD]@[IP-ADDRESS]:554/ :rtsp://admin:[PASSWORD]@[IP-ADDRESS]:554/11

1. Path for RTSP is: rtsp://admin:admin@camera_ip/VideoInput/1/h264/1

The factory preset username and password are admin:admin.

rtsp://admin:admin@''IP ADDRESS OF CAMERA'':554/stream2

*Source Path: rtsp://admin:password@<ip_address>:554/onvif2 *Source Path: rtsp://admin:password@<ip_address>:554/onvif1

rtsp://admin:123456@10.0.11.26/live/ch0

Source Path: rtsp://admin:PASSWORD@IP_ADDRESS:10554/tcp/av0_0

rtsp://192.168.1.10/user=admin&password=admin_channel=1_stream=0.sdp rtsp://192.168.1.10/user=admin&password=admin_channel=1_stream=0.sdp?tcp

rtsp://192.168.1.10/user=admin&password=admin_channel=1_stream=0.sdp rtsp://192.168.1.10/user=admin&password=admin_channel=1_stream=0.sdp?tcp

...wser to http://localhost/zm and log in with username (admin) and password (admin). log in as admin / admin

Remote Host Path: /snapshot.cgi?user=admin&pwd= (Assuming the default user/password for the camera) Using /videostream.cgi?user=admin&pwd= also worked for me.

...ed off the security on the camera, but with it on it would be rtsp://admin:admin@[camera's IP]:554)

Default login: admin | 12456

* Remote Hostname: admin@<ipaddress> * Remote Host Path: /videostream.cgi?user=admin&pwd=

(example: rtsp://admin:12345@mycamera.mydomain.com//Streaming/Channels/1)

Source Path : rtsp://admin@ip/live0.264 (replace live0 with live1 to select 720p instead of 1080p)

...of 16 characters. It's possible to add a new user, with read only/operator/admin permissions. ...of 16 characters. It's possible to add a new user, with read only/operator/admin permissions.

admin / admin

Remote Host Path: videostream.cgi?user=admin&pwd=888888

...ted to change the default login. I did this then added another user called admin. I'm not sure if this is necessary but I was able to get the camera to work * Source Path: rtsp://admin:(Password)@IP-Address:88/videoMain

rtsp://admin:111111@192.168.1.12:554/01/0

admin / admin

...dress by default and the web interface is on port 80. Default username is admin with no password. To get to the settings, click on the "Non IE web browser Set an admin password and optionally setup additional users and passwords. Optionally s

...address:5544/live0.264</code> (assumes default credentials, which is <code>admin</code> for username, and blank password)

*Source Path: rtsp://admin@12345<ip_address>:554/h264Preview_01_main

:Source Path: rtsp://{ip address}:554/user=admin&password={admin password}&channel=1&stream=0.sdp?

...mera does not allow blank passwords, it is critical to change password for admin/user/guest to values we can pass. You can test this from mplayer using the

**Remote Host Name: username:password@<IP ADDRESS> default = admin:@192.168.1.126

Source Path: rtsp://admin:YourPassWord@192.168.1.64:554/Streaming/Channels/101?transportmode=mcast&pr

**Remote Host Name: User:pass@ip.address (I used admin acc) ...Path: rtsp://admin:your_password@xxx.xxx.xxx.xxx/img/h264media.sav (I used admin acct)

...Path: rtmp://10.0.0.165:1935/bcs/channel0_main.bcs?channel=0&stream=0&user=admin&password=password Control Address: admin:password@10.0.0.165:8000

* rtsp://admin:airlive@192.168.0.100/media.amp?videocodec=mpeg4&resolution=vga&fps=30

...plugin.tar.gz" does not exist. Telnet port is open, but the default admin:admin does not log you in. The camera seems to be operating fine if you go throu Source Path: rtsp://admin:admin@192.168.1.100:554/cam/realmonitor?channel=1&subtype=0 (or subtype=1 for low

:Remote Host Path: /videostream.cgi?user=admin&pwd= (assuming you have an admin user on the cam with no password) :http://<ip-webcam>/videostream.cgi?user=admin&pwd=geheim&resolution=32&rate=6

:example: rtsp://admin:yourpassword@192.168.1.64:554/ch1/main/av_stream :example: rtsp://admin:yourpassword@192.168.1.64:554/ch1/sub/av_stream

...URL http://192.168.1.105 and login to camera web console (default user is admin and no password)

...to the camera (see further below if you need to change the username from "admin") our $USERNAME = "admin";

* Username: admin * Password ("admin" base64 encoded): YWRtaW4=

...da -i "rtmp://HOSTNAME_OR_IP/bcs/channel0_main.bcs?channel=0&stream=0&user=admin&password=PASSWORD" -an -f rawvideo -y /dev/null |rtmp://HOSTNAME_OR_IP/bcs/channel0_'''main'''.bcs?channel=0&stream=0&user=admin&password=PASSWORD <br />

rtsp://admin:password@xxx.xxx.xxx.xxx:554/Streaming/Channels/2 mplayer rtsp://admin:password@192.168.1.64:554/Streaming/Channels/2

...with the 1BF does not indicate there are three user profiles configured (''admin'', ''user'' and ''guest''), all with generic passwords. There did not appea

Remote Host Name: user:pass@x.x.x.x (admin:admin is the default user/pass) Remote Host Name: user:pass@x.x.x.x (admin:admin is the default user/pass and 192.168.0.30 is the default IP)

User: admin Pass: admin

Therefore, power the camera and log-in using the default credentials (admin/admin) and IP address 192.168.0.20 which AFAIK is the default for all PLANET prod Change the password of the admin user to a string <= 16 characters. As of firmware version '''1.0.42''' gues

(example: rtsp://admin:12345@172.16.1.25/cam/realmonitor?channel=1&subtype=0)

http://(FI9802W IP):88/cgi-bin/CGIStream.cgi?cmd=GetMJStream&usr=admin&pwd=

* Source Path: rtsp://admin:<password>@x.x.x.x:554/11 where x.x.x.x is the IP address of your camera, a

Host Name = user:pass@address (default user:pass = admin:123456)

...should be left blank and set only in the camera settings via. the camera's admin interface. Otherwise you will receive corrupted images from time to time an

:Remote Host Path: /videostream.cgi?user=admin&pwd=pass ''(user=admin, password=pass)'' :Control Address: admin:pass@192.168.1.99:99 ''(user:password@IP:Port used by camera)''

:Remote Host Path: /videostream.cgi?user=admin&pwd=pass ''(user=admin, password=pass)'' :Control Address: admin:pass@192.168.1.99:99 ''(user:password@IP:Port used by camera)''

:Remote host path: /cgi-bin/CGIProxy.fcgi?cmd=snapPicture2&usr=admin&pwd=password

:Remote Host Path: /videostream.cgi?user=admin&pwd={password}&resolution=32&rate=11 # eg : admin:@10.1.2.1:80

Occasionally an admin realises that because the server recording CCTV is housed at the same locat

I directly accessed my camera admin web interface, and reduced FPS to 3 and key frame rate interval to 10, Fran

===Forgot Admin Password for Zoneminder=== If this happens, blank out the password for admin, and you should be able to login with a blank password.

eg: admin:@<IP_ADDRESS_OF_CAMERA>:80<br/> # eg : admin:@10.1.2.1:80

* No reset button on the cameras. If admin password is set, you might have to use their program to reset your camera.

The manufacturer's default administrator Username is "admin" with a Password of "admin" (per page 31 of User's Guide).

They work just fine as an RTSP source, except they seem to use admin:admin as credentials for the stream no matter what they username/password is for

Tried it with just admin:@<IP Address of Camera> without password before setting camera password an you'll need to authenticate with the username "admin" and the password you set when configuring the cam.

* Default Username: admin * Default Password: admin

$ ffmpeg -i rtsp://admin:password@192.168.1.64:554/video/1 output.mp4 $ ffplay rtsp://admin:password@192.168.1.64:554/video/1

:Remote Host Path: /videostream.cgi?user=admin&pwd= (default user account) :Control Device: user=admin&pwd=

./zmodopipe -s <ipaddressofdvr> -p 18004 -v -c 1 -u <admin> -a <pass> -m 1 $ ./zmodopipe -s 192.168.1.100 -p 18004 -c 1 -v -u admin -a 123456 -m 1

...nded that you configure your camera with a separate visitor, operator, and admin password. This is done through the camera's web interface.

(4) Disable SELinux. (menu-system::Admin::SELinux Mgmnt; change system default enforcing mode to disabled).

When you run mysqltuner you will be prompted to enter the admin user (normally root) and then the password.

Systemd natively integrates all sorts of system admin functions that the legacy sys v init didn't have anything to do with. One o

...ere will be one users already defined, with username 'admin' and password 'admin'. This user is defined will full permissions and clicking on the 'Options'