Difference between revisions of "Hardware Compatibility List"
Meadowcourt (talk | contribs) |
|||
| Line 17: | Line 17: | ||
[[Hauppauge]] | [[Hauppauge]] | ||
[[Ituner Spectra 8]] | [[Ituner Spectra 8]] | ||
| Line 27: | Line 25: | ||
[[Tungson TE-8008]] | [[Tungson TE-8008]] | ||
Leadtek WinFast VC 100 - the cheapest bt878 model with no tuner on it, just Com/Svideo in. | Leadtek WinFast VC 100 - the cheapest bt878 model with no tuner on it, just Com/Svideo in. | ||
| Line 39: | Line 38: | ||
[[ Bluecherry - BC-H16480A]] | [[ Bluecherry - BC-H16480A]] | ||
[[TView 95/99]] | [[TView 95/99]] | ||
[[Videocards with Philips saa7134 chipset]] | [[Videocards with Philips saa7134 chipset]] | ||
| Line 47: | Line 44: | ||
[[Rapid OS]] | [[Rapid OS]] | ||
== bt8x8 Cards == | == bt8x8 Cards == | ||
| Line 87: | Line 80: | ||
* [[Airlink 101]] some | * [[Airlink 101]] some | ||
* [[ | * [[Apexis]] (APM-J011-WS, APM-J012-WS, possibly others) | ||
* [[ArecontVision]] (AV3130M, probably other too) | * [[ArecontVision]] (AV3130M, probably other too) | ||
| Line 106: | Line 89: | ||
* [[Brickcom]] These have been tested | * [[Brickcom]] These have been tested | ||
* [[BSTI]] Some | * [[BSTI]] Some | ||
* [[Cisco]] some | * [[Cisco]] some | ||
* [[D-Link]] Most | * [[D-Link]] Most | ||
* [[Foscam]] (FI8908W, FI8904W, possibly others) | * [[Foscam]] (FI8908W, FI8904W, possibly others) | ||
| Line 128: | Line 103: | ||
* [[Geovision]] (GV-FE420, possibly others) | * [[Geovision]] (GV-FE420, possibly others) | ||
* [[hootoo]] Some | * [[hootoo]] Some | ||
| Line 138: | Line 109: | ||
* [[Instar]] (IN-2905, possibly others) | * [[Instar]] (IN-2905, possibly others) | ||
* [[Level One]] some | * [[Level One]] some | ||
| Line 148: | Line 117: | ||
* [[Maygion]] (IP-603, IP-604, possibly others) | * [[Maygion]] (IP-603, IP-604, possibly others) | ||
* [[Rimax]] Some | * [[Rimax]] Some | ||
| Line 164: | Line 127: | ||
* [[Trendnet]] Most | * [[Trendnet]] Most | ||
* [[Wanscam]] FR4020A2 (Foscam clone) | * [[Wanscam]] FR4020A2 (Foscam clone) | ||
* [[x-vision]] Xvision cameras by y3k | * [[x-vision]] Xvision cameras by y3k | ||
* [[Y-Cam]] (Sharx Ip) Most | * [[Y-Cam]] (Sharx Ip) Most | ||
| Line 176: | Line 137: | ||
* [[Zecumate]] JPT3815W | * [[Zecumate]] JPT3815W | ||
| Line 192: | Line 151: | ||
* [[Panasonic]] some | * [[Panasonic]] some | ||
* | * PLANET some | ||
*[[Toshiba]] some | *[[Toshiba]] some | ||
| Line 210: | Line 169: | ||
*[[Vivotek]] Most | *[[Vivotek]] Most | ||
'''Compatible with modifications''' | '''Compatible with modifications''' | ||
| Line 220: | Line 175: | ||
* [[Mobotix]] all | * [[Mobotix]] all | ||
*[[Edimax]] some | |||
* [[Conceptronic]] some | * [[Conceptronic]] some | ||
| Line 246: | Line 203: | ||
With the yoics Aviosys 9100 firmware at http://www.yoics.com/?p=28, ZoneMinder can directly access all four ports via /usr/yoicsX.jpg as the remote host path, where X is 0 - 3. | With the yoics Aviosys 9100 firmware at http://www.yoics.com/?p=28, ZoneMinder can directly access all four ports via /usr/yoicsX.jpg as the remote host path, where X is 0 - 3. | ||
== USB Cameras == | == USB Cameras == | ||
| Line 257: | Line 210: | ||
*Creative Webcam Pro, Webcam 3, LIVE! Cam OPTIA PRO (V4L2, Chan 0, PAL, YUYV) | *Creative Webcam Pro, Webcam 3, LIVE! Cam OPTIA PRO (V4L2, Chan 0, PAL, YUYV) | ||
*''Most'' UVCvideo cameras, including: | *''Most'' UVCvideo cameras, including: [[Logitech QuickCam Express]], QuickCam Pro 3000, [[QuickCam Pro 4000]], QuickCam Communicate STX/Deluxe, [[Logitech Webcam Pro 9000]], and [[Webcam C250]] | ||
*Logitech Quickcam Orbit/Sphere (experimental basic pan/tilt control has also published for testing and hacking [http://www.zoneminder.com/forums/viewtopic.php?t=9788]) | *Logitech Quickcam Orbit/Sphere (experimental basic pan/tilt control has also published for testing and hacking [http://www.zoneminder.com/forums/viewtopic.php?t=9788]) | ||
| Line 274: | Line 227: | ||
Note that PWC drivers are not included in the kernel. Some distribution's add them in and other may not. Here are some relevant links: | Note that PWC drivers are not included in the kernel. Some distribution's add them in and other may not. Here are some relevant links: | ||
* [http://www.alliedarmament.com/ Toko Bunga Jakarta] | |||
* [https://www.tokobungakarangan.com/ Toko Bunga Online] | |||
* [http://www.smcc.demon.nl/webcam/ Old Maintainer] | * [http://www.smcc.demon.nl/webcam/ Old Maintainer] | ||
* [http://www.saillard.org/linux/pwc/ Current PWC Maintainer] | * [http://www.saillard.org/linux/pwc/ Current PWC Maintainer] | ||
| Line 289: | Line 244: | ||
== All other hardware as supported by Linux == | == All other hardware as supported by Linux == | ||
To find out if your hardware is supported, check the [http://www. | To find out if your hardware is supported, check the HCL [http://www.mpsmsc.com/recruitment-indonesia.html MSC Recruitment Indonesia] | ||
== Links == | |||
* [http://www.mpsmsc.com/crewing-indonesia.html MSC Crewing Indonesia] | |||
* [http://www.doxapest.co.id/index.php/pest-control-dan-anti-rayap Pest Control] | |||
* [http://www.tokobungasabana.com Toko Bunga Online] | |||
== Plug Computers == | == Plug Computers == | ||
Guruplug Server Plus -> How to install Zoneminder | Guruplug Server Plus -> How to install Zoneminder | ||
Revision as of 04:13, 22 April 2016
Zoneminder will work with almost any capture card that is supported by the linux kernel. You may find additional details about supported hardware in the part of the forums. Also if you find something in the forums that is missing from the wiki ADD IT.
Capture Cards
Camsecure PCI Express video capture
Leadtek WinFast VC 100 - the cheapest bt878 model with no tuner on it, just Com/Svideo in.
LinkDelight CCTV H.264 4CH DVR Card
Provideo PV- series (Bluecherry) Bluecherry - BC-H16480A TView 95/99
Videocards with Philips saa7134 chipset
bt8x8 Cards
A note on the bt8x8-based TV-tuner cards: these usually have beside the tuner input, also a Composite and an S-Video input. You can hook up 2 analog cameras to these, and access from ZoneMinder both of them as individual cameras, at max 15Fps. You don't need two separate TV cards for two cameras!
Pico2000 - 4 port card, one chip bt878, around 2 fps when using all channels
Bt878_4chip_8inputs -4 chips bt878, 8 inputs, around 5 fps when using 2 inputs per chip
bt878 8 chip 8 input - This card is supplied with D-sub to 8 BNC connector and uses the bt878 chip for each input allowing full frame rates and quality. See Kodicom 8800 for more information.
Geovision GV250 bt878a single chip 4 inputs - This capture Card is supplied with 4 video inputs but with NO audio channel
Most other BTTV (bt878, bt848) cards, see /usr/src/linux/Documentation/video4linux/bttv/CARDLIST on your system for a list of some of them.
Analog Cameras
Any regular composite or S-video camera connected via a supported capture card. Some analog cameras feature camera control - ZM supports several of these camera's Pan/Tilt/Zoom functions via serial port control, as well as camera Presets, Focus, Iris, etc.
Network Cameras
For Network Cams to work they need to be able to stream MJPEG without the requirement of activex controls. If you see the requirement for the camera calls for IE then there is a good chance it may not work. The other option is to grab JPEG images if the camera supports that option which will work but at a lower frame rate.
Any network camera that allows access to single JPEG image grabs or some but not all multi-part JPEG feeds.
Full Compatibility
- 7Links(TM Trade Mark)
- Abus some
- Airlink 101 some
- Apexis (APM-J011-WS, APM-J012-WS, possibly others)
- ArecontVision (AV3130M, probably other too)
- Astak Mole Some
- Axis All
- Brickcom These have been tested
- BSTI Some
- Cisco some
- D-Link Most
- Foscam (FI8908W, FI8904W, possibly others)
- Gadspot Most
- Generic Only tested one
- Geovision (GV-FE420, possibly others)
- hootoo Some
- Iguard IP390E
- Instar (IN-2905, possibly others)
- Level One some
- Linksys WVC-210 / WVC2300 / PVC2300 / WVC54GC
- Loftek Sentinel PTZ
- Maygion (IP-603, IP-604, possibly others)
- Rimax Some
- Sony Most
- TP-LINK Some
- Trendnet Most
- Wanscam FR4020A2 (Foscam clone)
- x-vision Xvision cameras by y3k
- Y-Cam (Sharx Ip) Most
- Zavio Some
- Zecumate JPT3815W
- Remote systems, themselves running zoneminder, can be accessed as cameras using the Remote Path of /cgi-bin/nph-zms?mode=single&monitor=1&scale=100&maxfps=5&buffer=1000 - where the monitor number is the correct camera on the remote system.
Single Jpeg Only
- Airlink 101 some
- JVC some
- Panasonic some
- PLANET some
- Toshiba some
- Vivotek All
Mpeg(ver1.24.0 and up)
- Axis All
- ACTi All
- Vivotek Most
Compatible with modifications
- Aviosys some
- Mobotix all
- Edimax some
- Conceptronic some
Compatible with problems
- Compro IP70. MPEG4 only, some reliability issues and general poor firmware quality.
- Grandtec WLAN Camera WiFi or III - acceptable indoor quality, no infrared-filter (better nightvision) cheap!
- Intellinet IPCamera with the new firmware.
- Old Intellinet IPCamera (model MWNC-100) with this (http://www.zoneminder.com/forums/viewtopic.php?t=7500) protocol adapter.
- OvisLink AirLive WL-5400CAM
Useful link: Flash's IP Camera Database, with Zoneminder compatibility guide: http://digdilem.org/cameras
Network Digitizers
Like Network Cameras, these devices produce a video stream - but they accept an analog video input from a camera or other video source.
- Synectics E100 encoder
- The Aviosys IP9100, Models A, B and Plus has four analog video inputs. It produces a ZM compatible video stream from one of the inputs, which is selectable via an HTTP GET command. There might even be a control script for ZM that lets you select the active video input using ZM's Camera Control Presets!
With the yoics Aviosys 9100 firmware at http://www.yoics.com/?p=28, ZoneMinder can directly access all four ports via /usr/yoicsX.jpg as the remote host path, where X is 0 - 3.
USB Cameras
- Just Zoom USB cam
- Creative Webcam Pro, Webcam 3, LIVE! Cam OPTIA PRO (V4L2, Chan 0, PAL, YUYV)
- Most UVCvideo cameras, including: Logitech QuickCam Express, QuickCam Pro 3000, QuickCam Pro 4000, QuickCam Communicate STX/Deluxe, Logitech Webcam Pro 9000, and Webcam C250
- Logitech Quickcam Orbit/Sphere (experimental basic pan/tilt control has also published for testing and hacking [1])
- Any OV511 based USB camera [2]
- Any CPIA based USB camera [3]
- Confirmed basic functionality with Microsoft Lifecam VX 5000 using UVC Streaming method
Note that most USB cameras that can use Video4Linux/V4L2, and so can be used by ZoneMinder. Some have older chipsets and can be hard to find new.
Note that PWC drivers are not included in the kernel. Some distribution's add them in and other may not. Here are some relevant links:
X10 Devices
The only device that really needs to be compatable with ZM is the Transceiver, all other x10 devices comunicate through that device.
- CM11 Bi-Directional Transceiver
Other X10 notes:
All other hardware as supported by Linux
To find out if your hardware is supported, check the HCL MSC Recruitment Indonesia
Links
Plug Computers
Guruplug Server Plus -> How to install Zoneminder
