Hardware Compatibility List

Zoneminder will work with almost any capture card that is supported by the linux kernel. You may find additional details about supported hardware in the Hardware Compatibility List part of the forums. Also if you find something in the forums that is missing from the wiki ADD IT.

Capture Cards

Anykeeper

Avermedia

Camsecure PCI Express video capture

Digiflower

Geovision GV250 - bt878a chip

Grandtec Grand X Guard [1]

Leadtek WinFast VC 100 - the cheapest bt878 model with no tuner on it, just Com/Svideo in.

Linux Media Labs LMLBT44 [3]

Osprey 100

Provideo PV- series (Bluecherry) [4]

Bluecherry - BC-H16480A [5]

TView 95/99

Videocards with Philips saa7134 chipset

WinFast TV2000 XP

Rapid OS

bt8x8 Cards

A note on the bt8x8-based TV-tuner cards: these usually have beside the tuner input, also a Composite and an S-Video input. You can hook up 2 analog cameras to these, and access from ZoneMinder both of them as individual cameras, at max 15Fps. You don't need two separate TV cards for two cameras!

Pico2000 - 4 port card, one chip bt878, around 2 fps when using all channels

Bt878_4chip_8inputs -4 chips bt878, 8 inputs, around 5 fps when using 2 inputs per chip

bt878 8 chip 8 input - This card is supplied with D-sub to 8 BNC connector and uses the bt878 chip for each input allowing full frame rates and quality. See Kodicom 8800 for more information.

Most other BTTV (bt878, bt848) cards, see /usr/src/linux/Documentation/video4linux/bttv/CARDLIST on your system for a list of some of them.

Analog Cameras

Any regular composite or S-video camera connected via a supported capture card. Some analog cameras feature camera control - ZM supports several of these camera's Pan/Tilt/Zoom functions via serial port control, as well as camera Presets, Focus, Iris, etc.

PictureTel PTZ2N.

Network Cameras

For Network Cams to work they need to be able to stream MJPEG without the requirement of activex controls. If you see the requirement for the camera calls for IE then there is a good chance it may not work. The other option is to grab JPEG images if the camera supports that option which will work but at a lower frame rate.

Any network camera that allows access to single JPEG image grabs or some but not all multi-part JPEG feeds.

Full Compatibility

Abus some

Airlink 101 some

Apexis (APM-J011-WS, APM-J012-WS, possibly others)

ArecontVision (AV3130M, probably other too)

Axis All

Astak Mole Some

Brickcom These have been tested

BSTI Some

Cisco some

D-Link Most

Foscam (FI8908W, FI8904W, possibly others)

Gadspot Most

Geovision (GV-FE420, possibly others)

Generic Only tested one

hootoo Some

Instar (IN-2905, possibly others)

Level One some

Linksys WVC-210 / WVC2300 / PVC2300 / WVC54GC

Loftek Sentinel PTZ

Maygion (IP-603, IP-604, possibly others)

Rimax Some

Sony Most

TP-LINK Some

Trendnet Most

Y-Cam (Sharx Ip) Most

Zavio Some

Iguard IP390E

x-vision Xvision cameras by y3k
Zecumate JPT3815W

7Links(TM Trade Mark)

Remote systems, themselves running zoneminder, can be accessed as cameras using the Remote Path of /cgi-bin/nph-zms?mode=single&monitor=1&scale=100&maxfps=5&buffer=1000 - where the monitor number is the correct camera on the remote system.

Single Jpeg Only

Airlink 101 some

JVC some

Panasonic some

PLANET some

Toshiba some

Veo Observer IP NetCam most

Vivotek All

Mpeg(ver1.24.0 and up)

ABS_MegaCam

Axis All

ACTi All

Vivotek Most

Compatible with modifications

Aviosys some

Mobotix all

Edimax some

Conceptronic some

Compatible with problems

Compro IP70. MPEG4 only, some reliability issues and general poor firmware quality.

Grandtec WLAN Camera WiFi or III - acceptable indoor quality, no infrared-filter (better nightvision) cheap!

Intellinet IPCamera with the new firmware.

Old Intellinet IPCamera (model MWNC-100) with this (http://www.zoneminder.com/forums/viewtopic.php?t=7500) protocol adapter.

OvisLink AirLive WL-5400CAM

Useful link: Flash's IP Camera Database, with Zoneminder compatibility guide: http://digdilem.org/cameras

Network Digitizers

Like Network Cameras, these devices produce a video stream - but they accept an analog video input from a camera or other video source.

Synectics E100 encoder
The Aviosys IP9100, Models A, B and Plus has four analog video inputs. It produces a ZM compatible video stream from one of the inputs, which is selectable via an HTTP GET command. There might even be a control script for ZM that lets you select the active video input using ZM's Camera Control Presets!

With the yoics Aviosys 9100 firmware at http://www.yoics.com/?p=28, ZoneMinder can directly access all four ports via /usr/yoicsX.jpg as the remote host path, where X is 0 - 3.