Search results

...5APR15): It has been reported that this procedure will work to get ZM 1.28.1 running on Ubuntu 15.04''' 1. Install Ubuntu 14.10 server including LAMP Server and OpenSSH Server.

...r than managing individual user crontabs. Used in Devuan Jessie, ZM 1.30 - 1.34. 00 1 1 * * root /sbin/reboot

Size 1 = Half: 176 x 144 ...ote Host Name: <USERNAME>:<PASSWORD>@<IP CAMERA> <-- example root:@192.168.1.2<br/>

# 1: stop # 31: 1

read -p "This script installs Zoneminder 1.32.x on Ubuntu 18.04 AMD64 with LAMP (MySQL) installed... add-apt-repository ppa:iconnor/zoneminder-1.32

1) The camera came with a software package to view the stream. Install this

:--with-lame=/home/src/lame-3.96.1/libmp3lame ...ZM goto options and under the web tab check that cambozola is enabled. In 1.25 you will find OPT_CAMBOZOLA under the '''Images''' tab. That's it, you'r

The text "1|on 5|5|cause|text|showtext" means that alarm will be triggered for the monitor which has ID=1,

videobuf_dma_sg 18786 1 tw68 btcx_risc 13400 1 tw68

...tively disabled by setting either the width or height to a value less than 1. ...e - 1 blob example.jpg|frame|right|This captured frame shows an image with 1 identified blob. The blob is outlined in the Alarm Colour specified above.

The current release of Zoneminder is 1.34.x and you are encourage to install or upgrade to that. ...MyISAM tables to InnoDB tables before you proceed. Upgrading Zoneminder to 1.26 or newer should do this for you.

// Use -1 for infinite, // 1 for 1 loop (2 plays), etc.

'''Ubuntu 18.04 with Zoneminder 1.30.4 Install Procedure''' ===Ubuntu 18.04 AMD64 with LAMP and Zoneminder 1.30.4 Shell Script===

[[Image:AX H264 VBR 1.png|thumb|Variable Bit Rate configuration]] ...00:00:30 -f rtsp -i rtsp://172.16.2.100:554/axis-media/media.amp -an -pass 1 -vcodec libx264 -vpre slow_firstpass -b 180000 -bt 180000 -threads 0 -y out

...MyISAM tables to InnoDB tables before you proceed. Upgrading Zoneminder to 1.26 or newer should do this for you. This has been tested on Ubuntu 14.04-1 running Zoneminder 1.26.5 and 1/28.0. I converted a database with over 30,000 Zoneminder events and 900 GIG

==ZM 1.25== ZM 1.25 is already in Raspbian. Newer development packages are available.

These cameras come pre-configured with a static IP of 192.168.1.108, and a standard username and password. Regardless of why they did this, ...Interestingly, the stream location ( <ip address>/cam/realmonitor?channel=1&subtype=0) is something I also found online for other ip cameras. This is l

...cameras should be recording at 25fps when in fact it's not uncommon to see 1, 2, 3 or 5 fps used as the standard. Many IP cams allow you to specify the

The above is enough (with ZM 1.25) to add a new monitor to Zoneminder. In this case, for a Foscam-compatib ...MinFilterPixels=9216, MaxFilterPixels=230400, MinBlobPixels=6144, MinBlobs=1

[[Various Learnings from getting Zomeminder 1.28.1 working well on Ubuntu Server 14.04|<Home]] Lets assume you have a monitor id of 1. As a quick test, just try this

where XXX is the channel for each camera (101=camera 1, 201=camera 2, 301=camera 3.. etc)

...The card uses a single Conexant 878A chip. In addition, some models have 1 audio input jack; it has not been tested with ZoneMinder. * Screen Display: 1/4/7/10/13/16 multi-view or full screen

**Remote Host Path: img/snapshot.cgi?size=3&quality=1 ***size=1-3 (160x120, 320x240, 640x480)

:Source Path : rtsp://user:passwd@xxx.xxx.xxx.xxx:554//Streaming/Channels/1

This is an interim procedure to install Zoneminder 1.30.4 on Ubuntu 17.10 nano /etc/php/7.1/apache2/php.ini

Note that this is not needed in recent ZM (>1.29). This camera can do up to 30 fps with MJPEG. (Firmware 1.01, zoneminder 1.25.0)

==Updated Jun 2015 for support with ZM 1.28.1 == * In Auto Stop Timeout put in 1

...TSP and the cam is working fine. The installed package (seen with dpkg) is 1.28.0-trusty on amd64. :Source Path : rtsp://user:password@192.0.2.1//Streaming/Channels/1

The FI9800p is a 1 megapixel 720p outdoor wired/wireless security camera with IR.

...he camera sees an image and it is shown on Zoneminder. It has taken up too 1 minute before i have seen change in the camera feed.

...these cameras can be found by searching for a PDF called "IPCAM CGI SDK 2.1". I also found it useful to use Firefox to monitor the requests posted to # Fix off-by-1 preset bug.

1 => 20 fps 15 => 1 fps

[[Various Learnings from getting Zomeminder 1.28.1 working well on Ubuntu Server 14.04|<Home]] ...compare a previous frame and based on 'color differences' between frame X-1 and X along with some algorithms it applies in addition to color difference

> For Sub Stream: rtsp://{CAM_ADDR}:{CAM_RTSP_PORT}/cam/realmonitor?subtype=1

**** Message: 1|on+5|5|cause|text|showtext **** Send notification every 1 second

...e_number]</b> with one of the profiles you want to use for the capture (<b>1,2,3 or 4</b>). ** F7210 & B7210: M2.1.6.02C045

* Remote Host Name (example): zoneminder:MYPASSWORD@192.168.1.3 * ''percent'': 1 - 100.

===02OCT18 A new version, 1.32.1 is released.=== read -p "This script installs Zoneminder 1.32.x on Ubuntu 16.04 AMD64 with LAMP (MySQL) installed...

my $address = "192.168.1.116" Replace the IP (192.168.1.116) with the configured IP of your device.

Cameras came with Channel 1 set to H.264, Channel 2 set to MJPEG Format mpeg4 is as follows, this will be on channel 1

1.3MP HD 960P 2.8 mm 3MP Lens 1/3" Aptina CMOS Dome H.264 Triple Streams ONVIF IP Camera P2P Build-in POE I

==Debian 12 with Zoneminder 1.36.x== Debian 12 Bookworm is released with Zoneminder 1.36.33 and as usual for Debian the zm database needs to be created manually.

<b>1./ log-in to terminal as su</b><br>

* Using 1 source you get 25 fps if you use more than 1 source, total FPS is 10/12

LOG_DEBUG_LEVEL set to ''1'' (to allow sending of debug output)

$self->move( 0, 1, 1 ); $self->move( 1, 1, 1 );

[[Various Learnings from getting Zomeminder 1.28.1 working well on Ubuntu Server 14.04|<Home]] I also put in a value of 1 in auto stop timeout (I don't think it matters)

* Web 4.0.1 build 170123 * Plugin 3.0.6.1

...video display in ZonEMindeR, make sure you select "Video For Linux Version 1" and the proper resolution for the camera. 1,2,3,4,9,8,5,4,13,12,11,10,15,14,7,6

...hange these settings at http://www.redhat.com/docs/manuals/database/RHDB-2.1-Manual/admin_user/kernel-resources.html. ...it will say something like "zmdc[6001].INF ['zmc -m 1234' starting at 1/1/1 02:56:25, pid = 459]" so you can get its PID from there. Now the ZM log fil

# For Zoneminder 1.26+ ...trol address is the camera's ip address AND web port. example: 192.168.1.1:80

*** /cgi-bin/hi3510/snap.cgi?&-getstream&-chn=1 ...ream: '''rtsp://<cameraip>:554/user=<username>&password=<password>&channel=1&stream=0.sdp'''

proxy_pass <nowiki>http://127.0.0.1:85;</nowiki> echo "HTTP/1.0 500 Internal Server Error"

...for all Debian platforms. The current version in Squeeze for Zoneminder is 1.24.2. Capabilities: [40] Power Management version 1

...in:admin@192.168.1.100:554/cam/realmonitor?channel=1&subtype=0 (or subtype=1 for low res) get no image. For subtype=0 use 1920x1080; and for subtype=1 use 352x240. These both work for me. There

to delete 1000 events with less than 1 time. You can click the delete, then click the delete

==Debian 11 with Zoneminder 1.36.x== ...he zm database needs to be created manually. This is not user friendly and 1.34 is considered old and unsupported. So we will be using the packages pro

GPIO[0,1,2] => M/D[1][A,B,C] (select pins) GPIO[18] => M/D[1][Enable]

:Device Embeded Web UI Version: 1.0.0.0 :ZoneMinder Version: 1.25.0

...rk is to use libvlc. Support was added somewhere around ZoneMinder version 1.27.0. It enables ZoneMinder to play virtually any stream that's actually su http://{LOGIN}:{PASSWORD}@{ADDRESS}/GetData.cgi?CH=1

[[Various Learnings from getting Zomeminder 1.28.1 working well on Ubuntu Server 14.04|<Home]] *Cron file to run the location checker every 1 hr, and check generated file status as well: https://github.com/pliablepixe

...n Ascii with Zoneminder 1.32.3 from ZM Repo]], except substituting release-1.34 for release in the zmrepo apt sources list. Please refer to zmrepo.zonem ...Debian Stretch / Devuan Ascii and Zoneminder Stable 1.34 from the ZMRepo. 1.35 is unstable (odd number).

In 1.32 and 1.34, you may have to adjust the following setting for auth_relay if authenti ...zm_server/cgi-bin/nph-zms?mode=jpeg&scale=100&maxfps=5&buffer=1000&monitor=1&user=admin" alt="stream down" width="420" height="340" /></h2>

<BR><BR><BR><BR><BR><BR><BR><BR>1 card: options i2c-algo-bit bit_test=1

...ranches out into 8 yellow BNC connectors which are labelled <tt>VIDEO&nbsp;1(9)</tt>, <tt>VIDEO&nbsp;2(10)</tt> and so on up to <tt>VIDEO&nbsp;8(16)</tt {| border="1" cellspacing="0" align="center"

I mistakenly blew away my config when I updated to 1.28.109 so I was looking for an easy way to create a new setup quickly. I d Front-low,201,Modect,231,4,320,176,,1

....27beta and pretty much all my minor issues were fixed. Now running under 1.27 things are working smooth. ...oring the four low def feeds, no alerts) I see a load average right around 1.5.

1. Install, configure, and test Postfix. 1. First, double-check that Postfix was configured with SSL support (ie. ldd

[[Various Learnings from getting Zomeminder 1.28.1 working well on Ubuntu Server 14.04|<Home]] '''Below two options in 1.30 or higher'''

There are two options: 1) Backup the full database. 2) Backup only the configuration. For 1), It does not backup any videos or images. So you will have a copy of all m

Be advised, this camera ships with a hard coded ip address of 192.168.1.10. DHCP is turned off. One cannot change this from the camera's web portal ...Path: rtsp://{ip address}:554/user=admin&password={admin password}&channel=1&stream=0.sdp?

$ ffmpeg -i rtsp://admin:password@192.168.1.64:554/video/1 output.mp4 $ ffplay rtsp://admin:password@192.168.1.64:554/video/1

:Device Embeded Web UI Version: 1.0.0.0 :ZoneMinder Version: 1.25.0

Zoneminder has been upgraded to 1.26.5. Zoneminder 1.26.4-3 on Ubuntu 12.04 64 BIT and 32 BIT

* In Auto Stop Timeout put in 1

This is the 1.30.4 /etc/init.d/zoneminder script for use with sysvinit compatible init sy # Default-Stop: 0 1 6

== CentOS 5.6 & ZoneMinder 1.25.0 == === Step Five - Installing ZoneMinder 1.25.0 ===

'''Foscam FI8908W IP Camera with PT (no Z) Working in ZM 1.24.2''' I recommend firmware V11.14.1.42 and Web UI V2.4.8.11

videobuf_dma_sg 18786 1 tw68 btcx_risc 13400 1 tw68

==ZoneMinder 1.28-1.30.0== * ZM 1.28.1, FW 2.420.AC00.11.R

...ou would want any single blob to trigger an event, so the default value of 1 (one) should suffice. In some circumstances, it may benefit to have only o

**Remote Host Path: /PictureCatch.cgi?username=admin&password=admin&channel=1 (or whatever your username/password is)

* Wifi and ethernet (100Mbs^-1) * Zoneminder 1.29 on Ubuntu 14.04 LTS

'''1)''' it can be used is to overlay text information (e.g. temperature sensor) Choose a monitor by monitor ID, say monitor 1, then add %Q to the monitors timestamp section.

Version 1.61 Not sure why ZM doesn't display frames faster than 1 FPS when the files are clearly updating faster.

Checked in versions of ZoneMinder 1.25. I have successfully setup a D-Link DCS-2103 (fw 1.0) on an Ubuntu 11.10 Server i386 using RTSP at 1280x800, 24-bit color and

<table border="1" cellpadding="1" cellspacing="1"> <td width="324"><p align="center">1 、 4 、 cycle </p></td>

...ider Zoneminder on a stick, a per-configured Lubuntu 14.04 with Zoneminder 1.29.0. See: https://wiki.zoneminder.com/Lubuntu_14.04_with_Zoneminder_1.29.0 Zoneminder 1.26.5-1 on Ubuntu 14.04 64 BIT and 32 BIT

...If you are doing an upgrade I strongly recommend you check the Zoneminder-1.36 Forum area for recommendations from others.''' ===Debian 10 Buster with Zoneminder 1.36.x from the ZM Release-1.36 Repo===

...ce Path : rtsp://<username>:<password>@<ip_address>:554/Streaming/Channels/1

-m, --monitor <monitor_id> : Specify which monitor to address, default 1 if absent ..., --state : Output the current monitor state, 0 = idle, 1 = prealarm, 2 = alarm,

== CIVS-IPC-2611 / 2621V (zm 1.32.3 release fix)== '''Notes''': This method yields a very clean image but only 1-2 FPSs, since it is pulling JPGs from the camera and displaying them as "vi

...>Remote Host Port - 80<br/>Remote Host Path - /snap.jpg?JpegSize=M&JpegCam=1 (JpegSize=M (should select Capture WxH pixels 352x288, for JpegSize=S selec

...en recording of Windows/Linux/Mac or any computer that uses VNC. LibVNC in 1.36 is a way to record VNC sessions. Any VNC server should be able to be use 1. Install TightVNC. https://www.tightvnc.com/download.html

...ath: rtsp://<username>:<password>@<ip_address>:554/cam/realmonitor?channel=1&subtype=0&unicast=true&proto=Onvif

'''1''' = 20fps; '''3''' = 15fps; '''6''' = 10fps; '''11''' = 5fps; '''13''' = 3 :1280*720 Pixels(1.0 megapixel)

==Test API is Working (1.32+)== ===API changes in 1.37===

The following is used in 1.36 / Debian 10 and newer. ...a short email, and one is designed for longer messages. In the code (as of 1.30 lines 818 and 918), in zmfilter.pl these are correspondingly sub SendEma

...minder and you apt update - apt upgrade without changing to PPA/zoneminder-1.34 you will get the next development version. Just be aware that it is poss ...a new Zoneminder install. Upgraders are encouraged to check the Zoneminder-1.34 Forum area for information.'''

# Write down the id number of the monitor(s), starting from 1 to the end of the list of available monitors. #* Remote Host Name: IP of the remote server (for example 192.168.1.1)

...for the camera: http://camera_ip/cgi-bin/user_registration.cgi?no_session=1 2. MJPEG PATH IS: http://camera_ip/liveimg.cgi?serverpush=1

...in/zm_detect.py --config /etc/zm/objectconfig.ini --eventid 2 --monitorid 1 --debug ...in/zm_detect.py --config /etc/zm/objectconfig.ini --eventid 2 --monitorid 1 --debug

The Raspberry Pi 4 has been tested with ZM 1.32.3 and Buster. the RPI4 requires Buster, so Stretch isn't an option. ...ion. 1.32.3 has support for H264 passthrough and JPEG recording only. 1.33/1.34 will be available at [[ZMRepo]] at some point.

* Host: Dell T320, 1 socket Xeon E5-2407 2.2 GHz CPU, BIOS 2.9.0 * Zoneminder: 1.34 and 1.36

:p.42 super high power LED,array, metal PCB ,package with 12 paral 1 mm² power chips, 360° or 120°.Size: 72 x 32 mm² ...avelengths at 590 nm, 640 nm, 660 nm, 810 nm 880 nm, 920 nm, 950 nm, M10 x 1.5 mm thread package

* Compression Rate to be Level 1 ...height x 3 (for 24 bit images) + a bit of overhead = 36 * 640 * 480 * 3 * 1.101 = 36865192

The cameras are accessed as Device Channel 0, 1, 2, and 3 on each Device Path.

B=0(mainstream),1(substream) rtsp://admin:111111@192.168.1.12:554/01/0

Confirmed working with Zonminder 1.29 on Ubuntu 14.04 using RTP/Unicast or RTP/RTSP on ...ce Path main channel : rtsp://user:password@<hostname>//Streaming/Channels/1

16 port video inputs, 1 port video output 16 port audio inputs, 1 port audio output

* [[MySQL]]: update zm.Config set Value = 1 where Name = "ZM_AUTH_HASH_LOGINS"; (picture thumbnails) [[File:Zmninja instructions 1.png|500px|border|alt=Instructions for Mobile Phone Client ZMNinja||Username

1:2345:respawn:/bin/login -f USERNAME tty1 </dev/tty1 >/dev/tty1 2>&1 /usr/local/bin/surf "localhost/zm/cgi-bin/nph-zms??mode=jpeg&monitor=1&scale=100&maxfps=5&buffer=1000&user=user&pass=pass" &

...ng/Channels/1 or rtsp://user:passwd@xxx.xxx.xxx.xxx:554/Streaming/Channels/1

== Edimax IC3110P/W (LAN/(WiFi) IP Camera 1,3MP, PoE, Nightvision) == '''Working configuration in ZoneMinder 1.28.1:'''<br/>

:Tested with ZoneMinder v.1.28.1 :Alarm Frame Count: 1

* [[Hikvision_DS-2CD2012-I|Hikvision DS-2CD2012-I 1.3MP IR Mini Bullet Camera]] | Works with ZM 1.30.4 with Ffmpeg

:System Firmware Version 1.5.1.11 :Application Firmware Version 2.22.1.143

<pre>end date/time greater than or equal to -1 minute AND alarm frames greater than or equal to 1 AND

Just remember to turn 1.0 in ZM_HTTP_VERSION in the Options > Network tab. In the x.x.x.x/cgi-bin/v Source path: rtsp://user:pass@<camera ip address>/streaming/Channels/1

image:mp4_roof_event.png| Step 1

'''Ubuntu Server 19.04 with Zoneminder 1.32.2''' 29MAR19 This was done with Ubuntu 19.04 Beta which contains Zoneminder 1.32.3. This is a preliminary procedure and may not work as changes are made

'''Equipment:''' Ubuntu 14.04, Zoneminder 1.30, Night Owl Poseidon DVR8, Zmodopipe .41, ffmpeg 3.0 compiled from source ./zmodopipe -s <ipaddressofdvr> -p 18004 -v -c 1 -u <admin> -a <pass> -m 1

===Release 1.25.0 - 2011/08/26=== ...ility. Please note a patch for this is also available for 1.24.4 which the 1.24.4 tarball also contains for recent downloads.

Basado en la guia para Ubuntu 11.04 con Zoneminder 1.25.0 address 192.168.1.10

sudo add-apt-repository ppa:iconnor/zoneminder-1.34 What=192.168.1.5:/volume1/ZoneMinder

php_value short_open_tag 1 php_value short_open_tag 1

As of 1.30.0 the ffmpeg Monitor type worked fine. ...Path : rtsp://<username>:<password>@<ip_address>:<port>/Streaming/Channels/1?tcp

The current release on June 30, 2009 is '''ZMLarch_1.24.2-1.iso''' *ZoneMinder svn 2935-1 (ZoneMinder is packaged and updating is very simple. See [[Update_ZMLarch]]

First upgrade to the latest version (at least App Firmware Version of 1.4.1.10) which enables the URL used for stills - <pre>http://<cam ip>:88/cgi-bin ''<b>Firmware 1.4.1.12:</b>''<br>

rtsp:// /Streaming/Channels/1 ...Path: rtsp://<username>:<password>@<ip_address>:<port>/Streaming/Channels/1

* Control Type: Foscam FI9821W (see note 1) * Auto Stop Timeout: 1

1. Find the camera you want to review, and click on the video history. You ca ...On the other hand, if the recordings only rarely have motion, then showing 1 month is ok.

here's a HowTo for installing ZM 1.22.3 on Sabayon Linux 3.2. I've needed less then 1,5 hours for installing Sabayon and ZoneMinder.

...ion on a camera simply click on the its corresponding function link (image 1). This will open up a small form giving you the function options that are a

I got this camera to work well with ZoneMinder 1.25.0, using the camera's video format<br> ...eg -i "rtsp://youruser:yourpassword@<cameraipaddr>/cam/realmonitor?channel=1&subtype=0" -r 8 out.mp4

* ''-c:v libx264 -preset ultrafast /videosfolder/on/some/path/`date -d "-1 days" +"%Y%m%d-%H%M%S-%N"`.avi < /dev/null'' * -r 1 -f image2 -i %07d.jpg -vcodec libvpx-vp9 -crf 18

# Upgrade the firmware. ZoneMinder 1.25 expects version 3.00 or later. Remote Host Name: 192.168.1.254

...deo stream running at ~5 fps. Refer to the table on the [[Foscam]] page ''[1]'' for other frame rate settings. # eg : admin:@10.1.2.1:80

[[Various Learnings from getting Zomeminder 1.28.1 working well on Ubuntu Server 14.04|<Home]] * In terms of quality, Option 1 (image snapshot) is the best. No artifacts, no smudging nothing. The downsi

Starting with Zoneminder 1.30.4 there is an Onvif probe option in the camera configuration. You can al ...neering-wyzesense-bridge-protocol-part-i/ Wyzesensor reverse engineering (1/3)

1.3MP IR Mini Bullet Camera [http://www.hikvision.com/en/products_show.asp?id ...Path : rtsp://<username>:<password>@<ip_address>:<port>/Streaming/Channels/1?tcp

multimedia/dirac-1.0.0-i486-2as.tgz multimedia/faac-1.26-i486-4sl.tgz

...(you can record from a zoneminder monitor), have a remote server recording 1 or 2 cameras so you at least stand a shot. This is also a highly configurab

For the FI9821P the following HTTP settings work in Zoneminder 1.28.1 For the FI9821P the following FFMPEG settings work in Zoneminder 1.28.1

1/2.8" Sony Megapixels CMOS RTSP Stream : rtsp://192.168.1.228/554/11 (change the 192.168.1.228 to your cam ip)

For 1-4 cameras, you can use a core2duo or better CPU.

01:07.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) Audio Channels: 1

...a 2nd HDD dedicated for videos only, with no OS or db files on it. Or (in 1.32 and newer) you may want to add multiple HDDs, and spread out the cameras ==ZoneMinder 1.31 or Newer==