Hardware Compatibility List
Zoneminder will work with almost any capture card that is supported by the linux kernel. You may find additional details about supported hardware in the part of the forums. Also if you find something in the forums that is missing from the wiki ADD IT.
Leadtek WinFast VC 100 - the cheapest bt878 model with no tuner on it, just Com/Svideo in.
A note on the bt8x8-based TV-tuner cards: these usually have beside the tuner input, also a Composite and an S-Video input. You can hook up 2 analog cameras to these, and access from ZoneMinder both of them as individual cameras, at max 15Fps. You don't need two separate TV cards for two cameras!
Pico2000 - 4 port card, one chip bt878, around 2 fps when using all channels
Bt878_4chip_8inputs -4 chips bt878, 8 inputs, around 5 fps when using 2 inputs per chip
Geovision GV250 bt878a single chip 4 inputs - This capture Card is supplied with 4 video inputs but with NO audio channel
Most other BTTV (bt878, bt848) cards, see /usr/src/linux/Documentation/video4linux/bttv/CARDLIST on your system for a list of some of them.
Any regular composite or S-video camera connected via a supported capture card. Some analog cameras feature camera control - ZM supports several of these camera's Pan/Tilt/Zoom functions via serial port control, as well as camera Presets, Focus, Iris, etc.
For Network Cams to work they need to be able to generate a video stream without the requirement of activex controls. If the requirements state Internet Explorer is the only supported browser, then the camera may not work. The other option is to grab JPEG images (snapshots), if the camera supports that option, which will work but at a lower frame rate.
Help us keep this list accurate.
The hardware compatibility list is maintained by you, the community. If you see something that is no longer up to date, please consider revising it. Naturally, be respectful with your edits. Those before you have put in a lot of effort into this documentation.
Maintaining PTZ Control Scripts is particularly important.
It is important to understand that many of the control scripts were written for older versions of ZoneMinder and may require changes to work with the most recent version. When reviewing control scripts, look at the date it was created (see the history tab at the top). If that date is not recent then the script may not work with the latest version. When in doubt, ask in the user forum.
If you discover the control script in this WiKi has already been added to ZoneMinder, then please update the WiKi to reflect that.
Consider adding your script to ZoneMinder.
If you are willing to do the work, we will gladly add new control scripts to ZoneMinder, as long as they have been tested to work properly. This requires submitting a pull request on our github site with the control script and the necessary sql bits to make it show up in the console. Once the control script has been added to the source tree, it will be maintained by the developers and will (should?) always work for you. This is really the best option as it avoids the endless maintenance required to keep the WiKi up to date.
- 7Links(TM Trade Mark)
- Abus some
- Airlink 101 some
- Apexis most if not all (only tested some)
- ArecontVision (AV3130M, probably other too)
- Astak Mole Some
- Axis All
- Brickcom These have been tested
- B-QTECH H.264 Camera
- BSTI Some
- Cisco some
- Dahua (IPC-HDB3200C, probably others)
- D-Link Most
- EasyN (Mini Speed Dome 1BF)
- Edimax only tested some
- Foscam (FI8908W, FI8904W, possibly others)
- Gadspot Most
- Generic Only tested one
- Geovision (GV-FE420, possibly others)
- Grandstream Grandstream (GXV-3672-FHD & GXV-3672-FHD-36 & GXV3611_HD tested)
- Hikvision Some
- hootoo Some
- Iguard IP390E
- Instar (IN-2905, possibly others)
- InternetEye M6840
- Level One some
- Linksys WVC-210 / WVC2300 / PVC2300 / WVC54GC
- Loftek Sentinel PTZ
- Maygion (IP-603, IP-604, possibly others)
- Messoa (NCR870, probably others)
- Rimax Some
- Sony Most
- Swann Some
- Swann SWADS-446CAM RTSP method
- TP-LINK Some
- Trendnet Most
- Wanscam FR4020A2 (Foscam clone)
- x-vision Xvision cameras by y3k (some)
- Y-Cam (Sharx Ip) Most
- Zavio Some
- Zecumate JPT3815W
- Remote systems, themselves running zoneminder, can be accessed as cameras using the Remote Path of /cgi-bin/nph-zms?mode=single&monitor=1&scale=100&maxfps=5&buffer=1000 - where the monitor number is the correct camera on the remote system.
Single Jpeg Only
- Airlink 101 some
- JVC some
- Panasonic some
- PLANET some
- Toshiba some
- Vivotek All
Mpeg(ver1.24.0 and up)
- Axis All
- ACTi All
- Vivotek Most
- Logitech 700 series some
- Ubiqiti some
Compatible with modifications
- Aviosys some
- Mobotix all
- Conceptronic some
Compatible with problems
- Compro IP70. MPEG4 only, some reliability issues and general poor firmware quality.
- Grandtec WLAN Camera WiFi or III - acceptable indoor quality, no infrared-filter (better nightvision) cheap!
- Intellinet IPCamera with the new firmware.
- Old Intellinet IPCamera (model MWNC-100) with this (http://www.zoneminder.com/forums/viewtopic.php?t=7500) protocol adapter.
- OvisLink AirLive WL-5400CAM
Useful link: Flash's IP Camera Database, with Zoneminder compatibility guide: http://digdilem.org/cameras
Like Network Cameras, these devices produce a video stream - but they accept an analog video input from a camera or other video source.
- Synectics E100 encoder
- The Aviosys IP9100, Models A, B and Plus has four analog video inputs. It produces a ZM compatible video stream from one of the inputs, which is selectable via an HTTP GET command. There might even be a control script for ZM that lets you select the active video input using ZM's Camera Control Presets!
With the yoics Aviosys 9100 firmware at http://www.yoics.com/?p=28, ZoneMinder can directly access all four ports via /usr/yoicsX.jpg as the remote host path, where X is 0 - 3.
- Video cameras & safes for antitheft purpose on the website http://www.infosafe.fr
- Just Zoom USB cam
- Creative Webcam Pro, Webcam 3, LIVE! Cam OPTIA PRO (V4L2, Chan 0, PAL, YUYV)
- Most UVCvideo cameras, including: Advent AWC213, Creative Labs VF0420, Logitech QuickCam Express, QuickCam Pro 3000, QuickCam Pro 4000, QuickCam Communicate STX/Deluxe, Logitech Webcam Pro 9000, and Webcam C250
- Logitech Quickcam Orbit/Sphere (experimental basic pan/tilt control has also published for testing and hacking )
- Any OV511 based USB camera 
- Any CPIA based USB camera 
- Confirmed basic functionality with Microsoft Lifecam VX 5000 using UVC Streaming method
Note that most USB cameras that can use Video4Linux/V4L2, and so can be used by ZoneMinder. Some have older chipsets and can be hard to find new.
Note that PWC drivers are not included in the kernel. Some distribution's add them in and other may not. Here are some relevant links:
The only device that really needs to be compatable with ZM is the Transceiver, all other x10 devices comunicate through that device.
- CM11 Bi-Directional Transceiver
Other X10 notes:
All other hardware as supported by Linux
To find out if your hardware is supported, check the HCL
Guruplug Server Plus -> How to install Zoneminder
ZM 1.25 is already in Raspbian. Newer development packages are available.
You will want libjpeg-turbo from the following repository by adding to your /etc/apt/sources.list
Add gpg by
wget -O - http://zarrenspry.info/zarrenspry.gpg.key%7Capt-key add -
apt-get install libturbojpeg8 libturbojpeg8-dev
If using the Pi camera, you will need to enable it in raspi-config as well as loading the v4l2 kernel module by adding the following to your /etc/modules. You will also need to assign more than 128M to the GPU.
Although the camera will can capture high res, you don't have enough RAM currently to do so. Especially if you have the early 256MB model. So just stick to 640x480.
You should be able to get around 20fps, but if you do anything involving the CPU you will get underruns.